docs(openspec): align system specs with current runtime behavior

- cherrypick_annotations@4.0.0-dev.0
 - cherrypick_generator@4.0.0-dev.0

.fvmrc

@@ -1,3 +1,3 @@
 {
-  "flutter": "3.29.3"
+  "flutter": "3.38.1"
 }

.github/prompts/opsx-apply.prompt.md

@@ -0,0 +1,149 @@
+---
+description: Implement tasks from an OpenSpec change (Experimental)
+---
+
+Implement tasks from an OpenSpec change.
+
+**Input**: Optionally specify a change name (e.g., `/opsx:apply add-auth`). If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **Select the change**
+
+   If a name is provided, use it. Otherwise:
+   - Infer from conversation context if the user mentioned a change
+   - Auto-select if only one active change exists
+   - If ambiguous, run `openspec list --json` to get available changes and use the **AskUserQuestion tool** to let the user select
+
+   Always announce: "Using change: <name>" and how to override (e.g., `/opsx:apply <other>`).
+
+2. **Check status to understand the schema**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used (e.g., "spec-driven")
+   - Which artifact contains the tasks (typically "tasks" for spec-driven, check status for others)
+
+3. **Get apply instructions**
+
+   ```bash
+   openspec instructions apply --change "<name>" --json
+   ```
+
+   This returns:
+   - Context file paths (varies by schema)
+   - Progress (total, complete, remaining)
+   - Task list with status
+   - Dynamic instruction based on current state
+
+   **Handle states:**
+   - If `state: "blocked"` (missing artifacts): show message, suggest using `/opsx:continue`
+   - If `state: "all_done"`: congratulate, suggest archive
+   - Otherwise: proceed to implementation
+
+4. **Read context files**
+
+   Read the files listed in `contextFiles` from the apply instructions output.
+   The files depend on the schema being used:
+   - **spec-driven**: proposal, specs, design, tasks
+   - Other schemas: follow the contextFiles from CLI output
+
+5. **Show current progress**
+
+   Display:
+   - Schema being used
+   - Progress: "N/M tasks complete"
+   - Remaining tasks overview
+   - Dynamic instruction from CLI
+
+6. **Implement tasks (loop until done or blocked)**
+
+   For each pending task:
+   - Show which task is being worked on
+   - Make the code changes required
+   - Keep changes minimal and focused
+   - Mark task complete in the tasks file: `- [ ]` → `- [x]`
+   - Continue to next task
+
+   **Pause if:**
+   - Task is unclear → ask for clarification
+   - Implementation reveals a design issue → suggest updating artifacts
+   - Error or blocker encountered → report and wait for guidance
+   - User interrupts
+
+7. **On completion or pause, show status**
+
+   Display:
+   - Tasks completed this session
+   - Overall progress: "N/M tasks complete"
+   - If all done: suggest archive
+   - If paused: explain why and wait for guidance
+
+**Output During Implementation**
+
+```
+## Implementing: <change-name> (schema: <schema-name>)
+
+Working on task 3/7: <task description>
+[...implementation happening...]
+✓ Task complete
+
+Working on task 4/7: <task description>
+[...implementation happening...]
+✓ Task complete
+```
+
+**Output On Completion**
+
+```
+## Implementation Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 7/7 tasks complete ✓
+
+### Completed This Session
+- [x] Task 1
+- [x] Task 2
+...
+
+All tasks complete! You can archive this change with `/opsx:archive`.
+```
+
+**Output On Pause (Issue Encountered)**
+
+```
+## Implementation Paused
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 4/7 tasks complete
+
+### Issue Encountered
+<description of the issue>
+
+**Options:**
+1. <option 1>
+2. <option 2>
+3. Other approach
+
+What would you like to do?
+```
+
+**Guardrails**
+- Keep going through tasks until done or blocked
+- Always read context files before starting (from the apply instructions output)
+- If task is ambiguous, pause and ask before implementing
+- If implementation reveals issues, pause and suggest artifact updates
+- Keep code changes minimal and scoped to each task
+- Update task checkbox immediately after completing each task
+- Pause on errors, blockers, or unclear requirements - don't guess
+- Use contextFiles from CLI output, don't assume specific file names
+
+**Fluid Workflow Integration**
+
+This skill supports the "actions on a change" model:
+
+- **Can be invoked anytime**: Before all artifacts are done (if tasks exist), after partial implementation, interleaved with other actions
+- **Allows artifact updates**: If implementation reveals design issues, suggest updating artifacts - not phase-locked, work fluidly

.github/prompts/opsx-archive.prompt.md

@@ -0,0 +1,154 @@
+---
+description: Archive a completed change in the experimental workflow
+---
+
+Archive a completed change in the experimental workflow.
+
+**Input**: Optionally specify a change name after `/opsx:archive` (e.g., `/opsx:archive add-auth`). If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **If no change name provided, prompt for selection**
+
+   Run `openspec list --json` to get available changes. Use the **AskUserQuestion tool** to let the user select.
+
+   Show only active changes (not already archived).
+   Include the schema used for each change if available.
+
+   **IMPORTANT**: Do NOT guess or auto-select a change. Always let the user choose.
+
+2. **Check artifact completion status**
+
+   Run `openspec status --change "<name>" --json` to check artifact completion.
+
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used
+   - `artifacts`: List of artifacts with their status (`done` or other)
+
+   **If any artifacts are not `done`:**
+   - Display warning listing incomplete artifacts
+   - Prompt user for confirmation to continue
+   - Proceed if user confirms
+
+3. **Check task completion status**
+
+   Read the tasks file (typically `tasks.md`) to check for incomplete tasks.
+
+   Count tasks marked with `- [ ]` (incomplete) vs `- [x]` (complete).
+
+   **If incomplete tasks found:**
+   - Display warning showing count of incomplete tasks
+   - Prompt user for confirmation to continue
+   - Proceed if user confirms
+
+   **If no tasks file exists:** Proceed without task-related warning.
+
+4. **Assess delta spec sync state**
+
+   Check for delta specs at `openspec/changes/<name>/specs/`. If none exist, proceed without sync prompt.
+
+   **If delta specs exist:**
+   - Compare each delta spec with its corresponding main spec at `openspec/specs/<capability>/spec.md`
+   - Determine what changes would be applied (adds, modifications, removals, renames)
+   - Show a combined summary before prompting
+
+   **Prompt options:**
+   - If changes needed: "Sync now (recommended)", "Archive without syncing"
+   - If already synced: "Archive now", "Sync anyway", "Cancel"
+
+   If user chooses sync, use Task tool (subagent_type: "general-purpose", prompt: "Use Skill tool to invoke openspec-sync-specs for change '<name>'. Delta spec analysis: <include the analyzed delta spec summary>"). Proceed to archive regardless of choice.
+
+5. **Perform the archive**
+
+   Create the archive directory if it doesn't exist:
+   ```bash
+   mkdir -p openspec/changes/archive
+   ```
+
+   Generate target name using current date: `YYYY-MM-DD-<change-name>`
+
+   **Check if target already exists:**
+   - If yes: Fail with error, suggest renaming existing archive or using different date
+   - If no: Move the change directory to archive
+
+   ```bash
+   mv openspec/changes/<name> openspec/changes/archive/YYYY-MM-DD-<name>
+   ```
+
+6. **Display summary**
+
+   Show archive completion summary including:
+   - Change name
+   - Schema that was used
+   - Archive location
+   - Spec sync status (synced / sync skipped / no delta specs)
+   - Note about any warnings (incomplete artifacts/tasks)
+
+**Output On Success**
+
+```
+## Archive Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** openspec/changes/archive/YYYY-MM-DD-<name>/
+**Specs:** ✓ Synced to main specs
+
+All artifacts complete. All tasks complete.
+```
+
+**Output On Success (No Delta Specs)**
+
+```
+## Archive Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** openspec/changes/archive/YYYY-MM-DD-<name>/
+**Specs:** No delta specs
+
+All artifacts complete. All tasks complete.
+```
+
+**Output On Success With Warnings**
+
+```
+## Archive Complete (with warnings)
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** openspec/changes/archive/YYYY-MM-DD-<name>/
+**Specs:** Sync skipped (user chose to skip)
+
+**Warnings:**
+- Archived with 2 incomplete artifacts
+- Archived with 3 incomplete tasks
+- Delta spec sync was skipped (user chose to skip)
+
+Review the archive if this was not intentional.
+```
+
+**Output On Error (Archive Exists)**
+
+```
+## Archive Failed
+
+**Change:** <change-name>
+**Target:** openspec/changes/archive/YYYY-MM-DD-<name>/
+
+Target archive directory already exists.
+
+**Options:**
+1. Rename the existing archive
+2. Delete the existing archive if it's a duplicate
+3. Wait until a different date to archive
+```
+
+**Guardrails**
+- Always prompt for change selection if not provided
+- Use artifact graph (openspec status --json) for completion checking
+- Don't block archive on warnings - just inform and confirm
+- Preserve .openspec.yaml when moving to archive (it moves with the directory)
+- Show clear summary of what happened
+- If sync is requested, use the Skill tool to invoke `openspec-sync-specs` (agent-driven)
+- If delta specs exist, always run the sync assessment and show the combined summary before prompting

.github/prompts/opsx-explore.prompt.md

@@ -0,0 +1,170 @@
+---
+description: Enter explore mode - think through ideas, investigate problems, clarify requirements
+---
+
+Enter explore mode. Think deeply. Visualize freely. Follow the conversation wherever it goes.
+
+**IMPORTANT: Explore mode is for thinking, not implementing.** You may read files, search code, and investigate the codebase, but you must NEVER write code or implement features. If the user asks you to implement something, remind them to exit explore mode first and create a change proposal. You MAY create OpenSpec artifacts (proposals, designs, specs) if the user asks—that's capturing thinking, not implementing.
+
+**This is a stance, not a workflow.** There are no fixed steps, no required sequence, no mandatory outputs. You're a thinking partner helping the user explore.
+
+**Input**: The argument after `/opsx:explore` is whatever the user wants to think about. Could be:
+- A vague idea: "real-time collaboration"
+- A specific problem: "the auth system is getting unwieldy"
+- A change name: "add-dark-mode" (to explore in context of that change)
+- A comparison: "postgres vs sqlite for this"
+- Nothing (just enter explore mode)
+
+---
+
+## The Stance
+
+- **Curious, not prescriptive** - Ask questions that emerge naturally, don't follow a script
+- **Open threads, not interrogations** - Surface multiple interesting directions and let the user follow what resonates. Don't funnel them through a single path of questions.
+- **Visual** - Use ASCII diagrams liberally when they'd help clarify thinking
+- **Adaptive** - Follow interesting threads, pivot when new information emerges
+- **Patient** - Don't rush to conclusions, let the shape of the problem emerge
+- **Grounded** - Explore the actual codebase when relevant, don't just theorize
+
+---
+
+## What You Might Do
+
+Depending on what the user brings, you might:
+
+**Explore the problem space**
+- Ask clarifying questions that emerge from what they said
+- Challenge assumptions
+- Reframe the problem
+- Find analogies
+
+**Investigate the codebase**
+- Map existing architecture relevant to the discussion
+- Find integration points
+- Identify patterns already in use
+- Surface hidden complexity
+
+**Compare options**
+- Brainstorm multiple approaches
+- Build comparison tables
+- Sketch tradeoffs
+- Recommend a path (if asked)
+
+**Visualize**
+```
+┌─────────────────────────────────────────┐
+│     Use ASCII diagrams liberally        │
+├─────────────────────────────────────────┤
+│                                         │
+│   ┌────────┐         ┌────────┐        │
+│   │ State  │────────▶│ State  │        │
+│   │   A    │         │   B    │        │
+│   └────────┘         └────────┘        │
+│                                         │
+│   System diagrams, state machines,      │
+│   data flows, architecture sketches,    │
+│   dependency graphs, comparison tables  │
+│                                         │
+└─────────────────────────────────────────┘
+```
+
+**Surface risks and unknowns**
+- Identify what could go wrong
+- Find gaps in understanding
+- Suggest spikes or investigations
+
+---
+
+## OpenSpec Awareness
+
+You have full context of the OpenSpec system. Use it naturally, don't force it.
+
+### Check for context
+
+At the start, quickly check what exists:
+```bash
+openspec list --json
+```
+
+This tells you:
+- If there are active changes
+- Their names, schemas, and status
+- What the user might be working on
+
+If the user mentioned a specific change name, read its artifacts for context.
+
+### When no change exists
+
+Think freely. When insights crystallize, you might offer:
+
+- "This feels solid enough to start a change. Want me to create a proposal?"
+- Or keep exploring - no pressure to formalize
+
+### When a change exists
+
+If the user mentions a change or you detect one is relevant:
+
+1. **Read existing artifacts for context**
+   - `openspec/changes/<name>/proposal.md`
+   - `openspec/changes/<name>/design.md`
+   - `openspec/changes/<name>/tasks.md`
+   - etc.
+
+2. **Reference them naturally in conversation**
+   - "Your design mentions using Redis, but we just realized SQLite fits better..."
+   - "The proposal scopes this to premium users, but we're now thinking everyone..."
+
+3. **Offer to capture when decisions are made**
+
+   | Insight Type | Where to Capture |
+   |--------------|------------------|
+   | New requirement discovered | `specs/<capability>/spec.md` |
+   | Requirement changed | `specs/<capability>/spec.md` |
+   | Design decision made | `design.md` |
+   | Scope changed | `proposal.md` |
+   | New work identified | `tasks.md` |
+   | Assumption invalidated | Relevant artifact |
+
+   Example offers:
+   - "That's a design decision. Capture it in design.md?"
+   - "This is a new requirement. Add it to specs?"
+   - "This changes scope. Update the proposal?"
+
+4. **The user decides** - Offer and move on. Don't pressure. Don't auto-capture.
+
+---
+
+## What You Don't Have To Do
+
+- Follow a script
+- Ask the same questions every time
+- Produce a specific artifact
+- Reach a conclusion
+- Stay on topic if a tangent is valuable
+- Be brief (this is thinking time)
+
+---
+
+## Ending Discovery
+
+There's no required ending. Discovery might:
+
+- **Flow into a proposal**: "Ready to start? I can create a change proposal."
+- **Result in artifact updates**: "Updated design.md with these decisions"
+- **Just provide clarity**: User has what they need, moves on
+- **Continue later**: "We can pick this up anytime"
+
+When things crystallize, you might offer a summary - but it's optional. Sometimes the thinking IS the value.
+
+---
+
+## Guardrails
+
+- **Don't implement** - Never write code or implement features. Creating OpenSpec artifacts is fine, writing application code is not.
+- **Don't fake understanding** - If something is unclear, dig deeper
+- **Don't rush** - Discovery is thinking time, not task time
+- **Don't force structure** - Let patterns emerge naturally
+- **Don't auto-capture** - Offer to save insights, don't just do it
+- **Do visualize** - A good diagram is worth many paragraphs
+- **Do explore the codebase** - Ground discussions in reality
+- **Do question assumptions** - Including the user's and your own

.github/prompts/opsx-propose.prompt.md

@@ -0,0 +1,103 @@
+---
+description: Propose a new change - create it and generate all artifacts in one step
+---
+
+Propose a new change - create the change and generate all artifacts in one step.
+
+I'll create a change with artifacts:
+- proposal.md (what & why)
+- design.md (how)
+- tasks.md (implementation steps)
+
+When ready to implement, run /opsx:apply
+
+---
+
+**Input**: The argument after `/opsx:propose` is the change name (kebab-case), OR a description of what the user wants to build.
+
+**Steps**
+
+1. **If no input provided, ask what they want to build**
+
+   Use the **AskUserQuestion tool** (open-ended, no preset options) to ask:
+   > "What change do you want to work on? Describe what you want to build or fix."
+
+   From their description, derive a kebab-case name (e.g., "add user authentication" → `add-user-auth`).
+
+   **IMPORTANT**: Do NOT proceed without understanding what the user wants to build.
+
+2. **Create the change directory**
+   ```bash
+   openspec new change "<name>"
+   ```
+   This creates a scaffolded change at `openspec/changes/<name>/` with `.openspec.yaml`.
+
+3. **Get the artifact build order**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to get:
+   - `applyRequires`: array of artifact IDs needed before implementation (e.g., `["tasks"]`)
+   - `artifacts`: list of all artifacts with their status and dependencies
+
+4. **Create artifacts in sequence until apply-ready**
+
+   Use the **TodoWrite tool** to track progress through the artifacts.
+
+   Loop through artifacts in dependency order (artifacts with no pending dependencies first):
+
+   a. **For each artifact that is `ready` (dependencies satisfied)**:
+      - Get instructions:
+        ```bash
+        openspec instructions <artifact-id> --change "<name>" --json
+        ```
+      - The instructions JSON includes:
+        - `context`: Project background (constraints for you - do NOT include in output)
+        - `rules`: Artifact-specific rules (constraints for you - do NOT include in output)
+        - `template`: The structure to use for your output file
+        - `instruction`: Schema-specific guidance for this artifact type
+        - `outputPath`: Where to write the artifact
+        - `dependencies`: Completed artifacts to read for context
+      - Read any completed dependency files for context
+      - Create the artifact file using `template` as the structure
+      - Apply `context` and `rules` as constraints - but do NOT copy them into the file
+      - Show brief progress: "Created <artifact-id>"
+
+   b. **Continue until all `applyRequires` artifacts are complete**
+      - After creating each artifact, re-run `openspec status --change "<name>" --json`
+      - Check if every artifact ID in `applyRequires` has `status: "done"` in the artifacts array
+      - Stop when all `applyRequires` artifacts are done
+
+   c. **If an artifact requires user input** (unclear context):
+      - Use **AskUserQuestion tool** to clarify
+      - Then continue with creation
+
+5. **Show final status**
+   ```bash
+   openspec status --change "<name>"
+   ```
+
+**Output**
+
+After completing all artifacts, summarize:
+- Change name and location
+- List of artifacts created with brief descriptions
+- What's ready: "All artifacts created! Ready for implementation."
+- Prompt: "Run `/opsx:apply` to start implementing."
+
+**Artifact Creation Guidelines**
+
+- Follow the `instruction` field from `openspec instructions` for each artifact type
+- The schema defines what each artifact should contain - follow it
+- Read dependency artifacts for context before creating new ones
+- Use `template` as the structure for your output file - fill in its sections
+- **IMPORTANT**: `context` and `rules` are constraints for YOU, not content for the file
+  - Do NOT copy `<context>`, `<rules>`, `<project_context>` blocks into the artifact
+  - These guide what you write, but should never appear in the output
+
+**Guardrails**
+- Create ALL artifacts needed for implementation (as defined by schema's `apply.requires`)
+- Always read dependency artifacts before creating a new one
+- If context is critically unclear, ask the user - but prefer making reasonable decisions to keep momentum
+- If a change with that name already exists, ask if user wants to continue it or create a new one
+- Verify each artifact file exists after writing before proceeding to next

.github/skills/openspec-apply-change/SKILL.md

@@ -0,0 +1,156 @@
+---
+name: openspec-apply-change
+description: Implement tasks from an OpenSpec change. Use when the user wants to start implementing, continue implementation, or work through tasks.
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.2.0"
+---
+
+Implement tasks from an OpenSpec change.
+
+**Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **Select the change**
+
+   If a name is provided, use it. Otherwise:
+   - Infer from conversation context if the user mentioned a change
+   - Auto-select if only one active change exists
+   - If ambiguous, run `openspec list --json` to get available changes and use the **AskUserQuestion tool** to let the user select
+
+   Always announce: "Using change: <name>" and how to override (e.g., `/opsx:apply <other>`).
+
+2. **Check status to understand the schema**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used (e.g., "spec-driven")
+   - Which artifact contains the tasks (typically "tasks" for spec-driven, check status for others)
+
+3. **Get apply instructions**
+
+   ```bash
+   openspec instructions apply --change "<name>" --json
+   ```
+
+   This returns:
+   - Context file paths (varies by schema - could be proposal/specs/design/tasks or spec/tests/implementation/docs)
+   - Progress (total, complete, remaining)
+   - Task list with status
+   - Dynamic instruction based on current state
+
+   **Handle states:**
+   - If `state: "blocked"` (missing artifacts): show message, suggest using openspec-continue-change
+   - If `state: "all_done"`: congratulate, suggest archive
+   - Otherwise: proceed to implementation
+
+4. **Read context files**
+
+   Read the files listed in `contextFiles` from the apply instructions output.
+   The files depend on the schema being used:
+   - **spec-driven**: proposal, specs, design, tasks
+   - Other schemas: follow the contextFiles from CLI output
+
+5. **Show current progress**
+
+   Display:
+   - Schema being used
+   - Progress: "N/M tasks complete"
+   - Remaining tasks overview
+   - Dynamic instruction from CLI
+
+6. **Implement tasks (loop until done or blocked)**
+
+   For each pending task:
+   - Show which task is being worked on
+   - Make the code changes required
+   - Keep changes minimal and focused
+   - Mark task complete in the tasks file: `- [ ]` → `- [x]`
+   - Continue to next task
+
+   **Pause if:**
+   - Task is unclear → ask for clarification
+   - Implementation reveals a design issue → suggest updating artifacts
+   - Error or blocker encountered → report and wait for guidance
+   - User interrupts
+
+7. **On completion or pause, show status**
+
+   Display:
+   - Tasks completed this session
+   - Overall progress: "N/M tasks complete"
+   - If all done: suggest archive
+   - If paused: explain why and wait for guidance
+
+**Output During Implementation**
+
+```
+## Implementing: <change-name> (schema: <schema-name>)
+
+Working on task 3/7: <task description>
+[...implementation happening...]
+✓ Task complete
+
+Working on task 4/7: <task description>
+[...implementation happening...]
+✓ Task complete
+```
+
+**Output On Completion**
+
+```
+## Implementation Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 7/7 tasks complete ✓
+
+### Completed This Session
+- [x] Task 1
+- [x] Task 2
+...
+
+All tasks complete! Ready to archive this change.
+```
+
+**Output On Pause (Issue Encountered)**
+
+```
+## Implementation Paused
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 4/7 tasks complete
+
+### Issue Encountered
+<description of the issue>
+
+**Options:**
+1. <option 1>
+2. <option 2>
+3. Other approach
+
+What would you like to do?
+```
+
+**Guardrails**
+- Keep going through tasks until done or blocked
+- Always read context files before starting (from the apply instructions output)
+- If task is ambiguous, pause and ask before implementing
+- If implementation reveals issues, pause and suggest artifact updates
+- Keep code changes minimal and scoped to each task
+- Update task checkbox immediately after completing each task
+- Pause on errors, blockers, or unclear requirements - don't guess
+- Use contextFiles from CLI output, don't assume specific file names
+
+**Fluid Workflow Integration**
+
+This skill supports the "actions on a change" model:
+
+- **Can be invoked anytime**: Before all artifacts are done (if tasks exist), after partial implementation, interleaved with other actions
+- **Allows artifact updates**: If implementation reveals design issues, suggest updating artifacts - not phase-locked, work fluidly

.github/skills/openspec-archive-change/SKILL.md

@@ -0,0 +1,114 @@
+---
+name: openspec-archive-change
+description: Archive a completed change in the experimental workflow. Use when the user wants to finalize and archive a change after implementation is complete.
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.2.0"
+---
+
+Archive a completed change in the experimental workflow.
+
+**Input**: Optionally specify a change name. If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **If no change name provided, prompt for selection**
+
+   Run `openspec list --json` to get available changes. Use the **AskUserQuestion tool** to let the user select.
+
+   Show only active changes (not already archived).
+   Include the schema used for each change if available.
+
+   **IMPORTANT**: Do NOT guess or auto-select a change. Always let the user choose.
+
+2. **Check artifact completion status**
+
+   Run `openspec status --change "<name>" --json` to check artifact completion.
+
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used
+   - `artifacts`: List of artifacts with their status (`done` or other)
+
+   **If any artifacts are not `done`:**
+   - Display warning listing incomplete artifacts
+   - Use **AskUserQuestion tool** to confirm user wants to proceed
+   - Proceed if user confirms
+
+3. **Check task completion status**
+
+   Read the tasks file (typically `tasks.md`) to check for incomplete tasks.
+
+   Count tasks marked with `- [ ]` (incomplete) vs `- [x]` (complete).
+
+   **If incomplete tasks found:**
+   - Display warning showing count of incomplete tasks
+   - Use **AskUserQuestion tool** to confirm user wants to proceed
+   - Proceed if user confirms
+
+   **If no tasks file exists:** Proceed without task-related warning.
+
+4. **Assess delta spec sync state**
+
+   Check for delta specs at `openspec/changes/<name>/specs/`. If none exist, proceed without sync prompt.
+
+   **If delta specs exist:**
+   - Compare each delta spec with its corresponding main spec at `openspec/specs/<capability>/spec.md`
+   - Determine what changes would be applied (adds, modifications, removals, renames)
+   - Show a combined summary before prompting
+
+   **Prompt options:**
+   - If changes needed: "Sync now (recommended)", "Archive without syncing"
+   - If already synced: "Archive now", "Sync anyway", "Cancel"
+
+   If user chooses sync, use Task tool (subagent_type: "general-purpose", prompt: "Use Skill tool to invoke openspec-sync-specs for change '<name>'. Delta spec analysis: <include the analyzed delta spec summary>"). Proceed to archive regardless of choice.
+
+5. **Perform the archive**
+
+   Create the archive directory if it doesn't exist:
+   ```bash
+   mkdir -p openspec/changes/archive
+   ```
+
+   Generate target name using current date: `YYYY-MM-DD-<change-name>`
+
+   **Check if target already exists:**
+   - If yes: Fail with error, suggest renaming existing archive or using different date
+   - If no: Move the change directory to archive
+
+   ```bash
+   mv openspec/changes/<name> openspec/changes/archive/YYYY-MM-DD-<name>
+   ```
+
+6. **Display summary**
+
+   Show archive completion summary including:
+   - Change name
+   - Schema that was used
+   - Archive location
+   - Whether specs were synced (if applicable)
+   - Note about any warnings (incomplete artifacts/tasks)
+
+**Output On Success**
+
+```
+## Archive Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** openspec/changes/archive/YYYY-MM-DD-<name>/
+**Specs:** ✓ Synced to main specs (or "No delta specs" or "Sync skipped")
+
+All artifacts complete. All tasks complete.
+```
+
+**Guardrails**
+- Always prompt for change selection if not provided
+- Use artifact graph (openspec status --json) for completion checking
+- Don't block archive on warnings - just inform and confirm
+- Preserve .openspec.yaml when moving to archive (it moves with the directory)
+- Show clear summary of what happened
+- If sync is requested, use openspec-sync-specs approach (agent-driven)
+- If delta specs exist, always run the sync assessment and show the combined summary before prompting

.github/skills/openspec-explore/SKILL.md

@@ -0,0 +1,288 @@
+---
+name: openspec-explore
+description: Enter explore mode - a thinking partner for exploring ideas, investigating problems, and clarifying requirements. Use when the user wants to think through something before or during a change.
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.2.0"
+---
+
+Enter explore mode. Think deeply. Visualize freely. Follow the conversation wherever it goes.
+
+**IMPORTANT: Explore mode is for thinking, not implementing.** You may read files, search code, and investigate the codebase, but you must NEVER write code or implement features. If the user asks you to implement something, remind them to exit explore mode first and create a change proposal. You MAY create OpenSpec artifacts (proposals, designs, specs) if the user asks—that's capturing thinking, not implementing.
+
+**This is a stance, not a workflow.** There are no fixed steps, no required sequence, no mandatory outputs. You're a thinking partner helping the user explore.
+
+---
+
+## The Stance
+
+- **Curious, not prescriptive** - Ask questions that emerge naturally, don't follow a script
+- **Open threads, not interrogations** - Surface multiple interesting directions and let the user follow what resonates. Don't funnel them through a single path of questions.
+- **Visual** - Use ASCII diagrams liberally when they'd help clarify thinking
+- **Adaptive** - Follow interesting threads, pivot when new information emerges
+- **Patient** - Don't rush to conclusions, let the shape of the problem emerge
+- **Grounded** - Explore the actual codebase when relevant, don't just theorize
+
+---
+
+## What You Might Do
+
+Depending on what the user brings, you might:
+
+**Explore the problem space**
+- Ask clarifying questions that emerge from what they said
+- Challenge assumptions
+- Reframe the problem
+- Find analogies
+
+**Investigate the codebase**
+- Map existing architecture relevant to the discussion
+- Find integration points
+- Identify patterns already in use
+- Surface hidden complexity
+
+**Compare options**
+- Brainstorm multiple approaches
+- Build comparison tables
+- Sketch tradeoffs
+- Recommend a path (if asked)
+
+**Visualize**
+```
+┌─────────────────────────────────────────┐
+│     Use ASCII diagrams liberally        │
+├─────────────────────────────────────────┤
+│                                         │
+│   ┌────────┐         ┌────────┐        │
+│   │ State  │────────▶│ State  │        │
+│   │   A    │         │   B    │        │
+│   └────────┘         └────────┘        │
+│                                         │
+│   System diagrams, state machines,      │
+│   data flows, architecture sketches,    │
+│   dependency graphs, comparison tables  │
+│                                         │
+└─────────────────────────────────────────┘
+```
+
+**Surface risks and unknowns**
+- Identify what could go wrong
+- Find gaps in understanding
+- Suggest spikes or investigations
+
+---
+
+## OpenSpec Awareness
+
+You have full context of the OpenSpec system. Use it naturally, don't force it.
+
+### Check for context
+
+At the start, quickly check what exists:
+```bash
+openspec list --json
+```
+
+This tells you:
+- If there are active changes
+- Their names, schemas, and status
+- What the user might be working on
+
+### When no change exists
+
+Think freely. When insights crystallize, you might offer:
+
+- "This feels solid enough to start a change. Want me to create a proposal?"
+- Or keep exploring - no pressure to formalize
+
+### When a change exists
+
+If the user mentions a change or you detect one is relevant:
+
+1. **Read existing artifacts for context**
+   - `openspec/changes/<name>/proposal.md`
+   - `openspec/changes/<name>/design.md`
+   - `openspec/changes/<name>/tasks.md`
+   - etc.
+
+2. **Reference them naturally in conversation**
+   - "Your design mentions using Redis, but we just realized SQLite fits better..."
+   - "The proposal scopes this to premium users, but we're now thinking everyone..."
+
+3. **Offer to capture when decisions are made**
+
+   | Insight Type | Where to Capture |
+   |--------------|------------------|
+   | New requirement discovered | `specs/<capability>/spec.md` |
+   | Requirement changed | `specs/<capability>/spec.md` |
+   | Design decision made | `design.md` |
+   | Scope changed | `proposal.md` |
+   | New work identified | `tasks.md` |
+   | Assumption invalidated | Relevant artifact |
+
+   Example offers:
+   - "That's a design decision. Capture it in design.md?"
+   - "This is a new requirement. Add it to specs?"
+   - "This changes scope. Update the proposal?"
+
+4. **The user decides** - Offer and move on. Don't pressure. Don't auto-capture.
+
+---
+
+## What You Don't Have To Do
+
+- Follow a script
+- Ask the same questions every time
+- Produce a specific artifact
+- Reach a conclusion
+- Stay on topic if a tangent is valuable
+- Be brief (this is thinking time)
+
+---
+
+## Handling Different Entry Points
+
+**User brings a vague idea:**
+```
+User: I'm thinking about adding real-time collaboration
+
+You: Real-time collab is a big space. Let me think about this...
+
+      COLLABORATION SPECTRUM
+      ════════════════════════════════════════════
+
+      Awareness          Coordination         Sync
+          │                   │                 │
+          ▼                   ▼                 ▼
+      ┌────────┐         ┌────────┐        ┌────────┐
+      │Presence│         │Cursors │        │  CRDT  │
+      │  "3    │         │ Multi  │        │Conflict│
+      │online" │         │ select │        │  free  │
+      └────────┘         └────────┘        └────────┘
+          │                   │                 │
+       trivial            moderate           complex
+
+      Where's your head at?
+```
+
+**User brings a specific problem:**
+```
+User: The auth system is a mess
+
+You: [reads codebase]
+
+     ┌─────────────────────────────────────────────┐
+     │              CURRENT AUTH FLOW              │
+     └─────────────────────────────────────────────┘
+                        │
+          ┌─────────────┼─────────────┐
+          ▼             ▼             ▼
+     ┌─────────┐  ┌─────────┐  ┌─────────┐
+     │ Google  │  │  GitHub │  │  Email  │
+     │  OAuth  │  │  OAuth  │  │  Magic  │
+     └────┬────┘  └────┬────┘  └────┬────┘
+          │             │             │
+          └─────────────┼─────────────┘
+                        ▼
+                  ┌───────────┐
+                  │  Session  │
+                  └─────┬─────┘
+                        │
+                        ▼
+                  ┌───────────┐
+                  │   Perms   │
+                  └───────────┘
+
+     I see three tangles. Which one's burning?
+```
+
+**User is stuck mid-implementation:**
+```
+User: /opsx:explore add-auth-system
+      The OAuth integration is more complex than expected
+
+You: [reads change artifacts]
+
+     You're on task 4: "Implement OAuth flow"
+
+     Let me trace what's involved...
+
+     [draws diagram, explores options, suggests paths]
+
+     Want to update the design to reflect this?
+     Or add a spike task to investigate?
+```
+
+**User wants to compare options:**
+```
+User: Should we use Postgres or SQLite?
+
+You: Generic answer is boring. What's the context?
+
+User: A CLI tool that tracks local dev environments
+
+You: That changes everything.
+
+     ┌─────────────────────────────────────────────────┐
+     │         CLI TOOL DATA STORAGE                  │
+     └─────────────────────────────────────────────────┘
+
+     Key constraints:
+     • No daemon running
+     • Must work offline
+     • Single user
+
+                  SQLite          Postgres
+     Deployment   embedded ✓      needs server ✗
+     Offline      yes ✓           no ✗
+     Single file  yes ✓           no ✗
+
+     SQLite. Not even close.
+
+     Unless... is there a sync component?
+```
+
+---
+
+## Ending Discovery
+
+There's no required ending. Discovery might:
+
+- **Flow into a proposal**: "Ready to start? I can create a change proposal."
+- **Result in artifact updates**: "Updated design.md with these decisions"
+- **Just provide clarity**: User has what they need, moves on
+- **Continue later**: "We can pick this up anytime"
+
+When it feels like things are crystallizing, you might summarize:
+
+```
+## What We Figured Out
+
+**The problem**: [crystallized understanding]
+
+**The approach**: [if one emerged]
+
+**Open questions**: [if any remain]
+
+**Next steps** (if ready):
+- Create a change proposal
+- Keep exploring: just keep talking
+```
+
+But this summary is optional. Sometimes the thinking IS the value.
+
+---
+
+## Guardrails
+
+- **Don't implement** - Never write code or implement features. Creating OpenSpec artifacts is fine, writing application code is not.
+- **Don't fake understanding** - If something is unclear, dig deeper
+- **Don't rush** - Discovery is thinking time, not task time
+- **Don't force structure** - Let patterns emerge naturally
+- **Don't auto-capture** - Offer to save insights, don't just do it
+- **Do visualize** - A good diagram is worth many paragraphs
+- **Do explore the codebase** - Ground discussions in reality
+- **Do question assumptions** - Including the user's and your own

.github/skills/openspec-propose/SKILL.md

@@ -0,0 +1,110 @@
+---
+name: openspec-propose
+description: Propose a new change with all artifacts generated in one step. Use when the user wants to quickly describe what they want to build and get a complete proposal with design, specs, and tasks ready for implementation.
+license: MIT
+compatibility: Requires openspec CLI.
+metadata:
+  author: openspec
+  version: "1.0"
+  generatedBy: "1.2.0"
+---
+
+Propose a new change - create the change and generate all artifacts in one step.
+
+I'll create a change with artifacts:
+- proposal.md (what & why)
+- design.md (how)
+- tasks.md (implementation steps)
+
+When ready to implement, run /opsx:apply
+
+---
+
+**Input**: The user's request should include a change name (kebab-case) OR a description of what they want to build.
+
+**Steps**
+
+1. **If no clear input provided, ask what they want to build**
+
+   Use the **AskUserQuestion tool** (open-ended, no preset options) to ask:
+   > "What change do you want to work on? Describe what you want to build or fix."
+
+   From their description, derive a kebab-case name (e.g., "add user authentication" → `add-user-auth`).
+
+   **IMPORTANT**: Do NOT proceed without understanding what the user wants to build.
+
+2. **Create the change directory**
+   ```bash
+   openspec new change "<name>"
+   ```
+   This creates a scaffolded change at `openspec/changes/<name>/` with `.openspec.yaml`.
+
+3. **Get the artifact build order**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to get:
+   - `applyRequires`: array of artifact IDs needed before implementation (e.g., `["tasks"]`)
+   - `artifacts`: list of all artifacts with their status and dependencies
+
+4. **Create artifacts in sequence until apply-ready**
+
+   Use the **TodoWrite tool** to track progress through the artifacts.
+
+   Loop through artifacts in dependency order (artifacts with no pending dependencies first):
+
+   a. **For each artifact that is `ready` (dependencies satisfied)**:
+      - Get instructions:
+        ```bash
+        openspec instructions <artifact-id> --change "<name>" --json
+        ```
+      - The instructions JSON includes:
+        - `context`: Project background (constraints for you - do NOT include in output)
+        - `rules`: Artifact-specific rules (constraints for you - do NOT include in output)
+        - `template`: The structure to use for your output file
+        - `instruction`: Schema-specific guidance for this artifact type
+        - `outputPath`: Where to write the artifact
+        - `dependencies`: Completed artifacts to read for context
+      - Read any completed dependency files for context
+      - Create the artifact file using `template` as the structure
+      - Apply `context` and `rules` as constraints - but do NOT copy them into the file
+      - Show brief progress: "Created <artifact-id>"
+
+   b. **Continue until all `applyRequires` artifacts are complete**
+      - After creating each artifact, re-run `openspec status --change "<name>" --json`
+      - Check if every artifact ID in `applyRequires` has `status: "done"` in the artifacts array
+      - Stop when all `applyRequires` artifacts are done
+
+   c. **If an artifact requires user input** (unclear context):
+      - Use **AskUserQuestion tool** to clarify
+      - Then continue with creation
+
+5. **Show final status**
+   ```bash
+   openspec status --change "<name>"
+   ```
+
+**Output**
+
+After completing all artifacts, summarize:
+- Change name and location
+- List of artifacts created with brief descriptions
+- What's ready: "All artifacts created! Ready for implementation."
+- Prompt: "Run `/opsx:apply` or ask me to implement to start working on the tasks."
+
+**Artifact Creation Guidelines**
+
+- Follow the `instruction` field from `openspec instructions` for each artifact type
+- The schema defines what each artifact should contain - follow it
+- Read dependency artifacts for context before creating new ones
+- Use `template` as the structure for your output file - fill in its sections
+- **IMPORTANT**: `context` and `rules` are constraints for YOU, not content for the file
+  - Do NOT copy `<context>`, `<rules>`, `<project_context>` blocks into the artifact
+  - These guide what you write, but should never appear in the output
+
+**Guardrails**
+- Create ALL artifacts needed for implementation (as defined by schema's `apply.requires`)
+- Always read dependency artifacts before creating a new one
+- If context is critically unclear, ask the user - but prefer making reasonable decisions to keep momentum
+- If a change with that name already exists, ask if user wants to continue it or create a new one
+- Verify each artifact file exists after writing before proceeding to next

CHANGELOG.md

@@ -3,6 +3,218 @@
 All notable changes to this project will be documented in this file.
 See [Conventional Commits](https://conventionalcommits.org) for commit guidelines.
 
+## 2026-01-29
+
+### Changes
+
+---
+
+Packages with breaking changes:
+
+ - [`cherrypick_annotations` - `v4.0.0-dev.0`](#cherrypick_annotations---v400-dev0)
+ - [`cherrypick_generator` - `v4.0.0-dev.0`](#cherrypick_generator---v400-dev0)
+
+Packages with other changes:
+
+ - There are no other changes in this release.
+
+---
+
+#### `cherrypick_annotations` - `v4.0.0-dev.0`
+
+ - **BREAKING** **FEAT**: update Dart SDK minimum versions.
+
+#### `cherrypick_generator` - `v4.0.0-dev.0`
+
+ - **BREAKING** **FEAT**: update Dart SDK minimum versions.
+
+
+## 2026-01-29
+
+### Changes
+
+---
+
+Packages with breaking changes:
+
+ - There are no breaking changes in this release.
+
+Packages with other changes:
+
+ - [`cherrypick_annotations` - `v3.0.3`](#cherrypick_annotations---v303)
+ - [`cherrypick_generator` - `v3.0.3`](#cherrypick_generator---v303)
+
+---
+
+#### `cherrypick_annotations` - `v3.0.3`
+
+#### `cherrypick_generator` - `v3.0.3`
+
+
+## 2026-01-29
+
+### Changes
+
+---
+
+Packages with breaking changes:
+
+ - There are no breaking changes in this release.
+
+Packages with other changes:
+
+ - [`cherrypick_annotations` - `v3.0.2`](#cherrypick_annotations---v302)
+ - [`cherrypick_generator` - `v3.0.2`](#cherrypick_generator---v302)
+
+Packages graduated to a stable release (see pre-releases prior to the stable version for changelog entries):
+
+ - `cherrypick_annotations` - `v3.0.2`
+ - `cherrypick_generator` - `v3.0.2`
+
+---
+
+#### `cherrypick_annotations` - `v3.0.2`
+
+#### `cherrypick_generator` - `v3.0.2`
+
+
+## 2025-10-20
+
+### Changes
+
+---
+
+Packages with breaking changes:
+
+ - There are no breaking changes in this release.
+
+Packages with other changes:
+
+ - [`cherrypick` - `v3.0.2`](#cherrypick---v302)
+ - [`cherrypick_flutter` - `v3.0.2`](#cherrypick_flutter---v302)
+ - [`talker_cherrypick_logger` - `v3.0.2`](#talker_cherrypick_logger---v302)
+
+Packages with dependency updates only:
+
+> Packages listed below depend on other packages in this workspace that have had changes. Their versions have been incremented to bump the minimum dependency versions of the packages they depend upon in this project.
+
+ - `cherrypick_flutter` - `v3.0.2`
+ - `talker_cherrypick_logger` - `v3.0.2`
+
+---
+
+#### `cherrypick` - `v3.0.2`
+
+ - **FIX**(test): fix warning.
+ - **FIX**(scope): properly clear binding and module references on dispose.
+
+
+## 2025-09-09
+
+### Changes
+
+---
+
+Packages with breaking changes:
+
+ - There are no breaking changes in this release.
+
+Packages with other changes:
+
+ - [`cherrypick_annotations` - `v3.0.2-dev.0`](#cherrypick_annotations---v302-dev0)
+ - [`cherrypick_generator` - `v3.0.2-dev.0`](#cherrypick_generator---v302-dev0)
+
+---
+
+#### `cherrypick_annotations` - `v3.0.2-dev.0`
+
+ - **REFACTOR**(generator): migrate cherrypick_generator to analyzer element2 API.
+
+#### `cherrypick_generator` - `v3.0.2-dev.0`
+
+ - **REFACTOR**(generator): migrate cherrypick_generator to analyzer element2 API.
+
+
+## 2025-09-09
+
+### Changes
+
+---
+
+Packages with breaking changes:
+
+ - There are no breaking changes in this release.
+
+Packages with other changes:
+
+ - [`cherrypick` - `v3.0.1`](#cherrypick---v301)
+ - [`cherrypick_annotations` - `v3.0.1`](#cherrypick_annotations---v301)
+ - [`cherrypick_flutter` - `v3.0.1`](#cherrypick_flutter---v301)
+ - [`cherrypick_generator` - `v3.0.1`](#cherrypick_generator---v301)
+ - [`talker_cherrypick_logger` - `v3.0.1`](#talker_cherrypick_logger---v301)
+
+---
+
+#### `cherrypick` - `v3.0.1`
+
+ - **DOCS**: add Netlify deployment status badge to README files.
+
+#### `cherrypick_annotations` - `v3.0.1`
+
+ - **DOCS**: add Netlify deployment status badge to README files.
+
+#### `cherrypick_flutter` - `v3.0.1`
+
+ - **DOCS**: add Netlify deployment status badge to README files.
+
+#### `cherrypick_generator` - `v3.0.1`
+
+ - **DOCS**: add Netlify deployment status badge to README files.
+
+#### `talker_cherrypick_logger` - `v3.0.1`
+
+ - **DOCS**: add Netlify deployment status badge to README files.
+
+
+## 2025-09-08
+
+### Changes
+
+---
+
+Packages with breaking changes:
+
+ - [`cherrypick` - `v3.0.0`](#cherrypick---v300)
+ - [`cherrypick_annotations` - `v3.0.0`](#cherrypick_annotations---v300)
+ - [`cherrypick_flutter` - `v3.0.0`](#cherrypick_flutter---v300)
+ - [`cherrypick_generator` - `v3.0.0`](#cherrypick_generator---v300)
+ - [`talker_cherrypick_logger` - `v3.0.0`](#talker_cherrypick_logger---v300)
+
+Packages with other changes:
+
+ - There are no other changes in this release.
+
+Packages graduated to a stable release (see pre-releases prior to the stable version for changelog entries):
+
+ - `cherrypick` - `v3.0.0`
+ - `cherrypick_annotations` - `v3.0.0`
+ - `cherrypick_flutter` - `v3.0.0`
+ - `cherrypick_generator` - `v3.0.0`
+ - `talker_cherrypick_logger` - `v3.0.0`
+
+---
+
+#### `cherrypick` - `v3.0.0`
+
+#### `cherrypick_annotations` - `v3.0.0`
+
+#### `cherrypick_flutter` - `v3.0.0`
+
+#### `cherrypick_generator` - `v3.0.0`
+
+#### `talker_cherrypick_logger` - `v3.0.0`
+
+
 ## 2025-09-08
 
 ### Changes

README.md

@@ -1,3 +1,8 @@
+[![Melos + FVM CI](https://github.com/pese-git/cherrypick/actions/workflows/pipeline.yml/badge.svg)](https://github.com/pese-git/cherrypick/actions/workflows/pipeline.yml)
+[![Netlify Status](https://api.netlify.com/api/v1/badges/3c3e0f98-27a9-4dd4-9eab-4be0b96798b8/deploy-status)](https://app.netlify.com/projects/cherrypick-di/deploys)
+
+---
+
 # CherryPick Workspace
 
 CherryPick Workspace is a modular, open-source dependency injection ecosystem for Dart and Flutter, designed to offer lightweight, flexible, and scalable DI suitable for both backend and frontend (Flutter) development. This monorepo contains the main DI runtime library, annotation helpers, code generation for modular bindings, and seamless Flutter integration.
@@ -142,4 +147,4 @@ Please see:
 
 ---
 
-**Happy Cherry Picking! 🍒**
+**Happy Cherry Picking! 🍒**

benchmark_di/lib/cli/benchmark_cli.dart

@@ -98,7 +98,7 @@ class BenchmarkCliRunner {
             final di = RiverpodAdapter();
             if (scenario == UniversalScenario.asyncChain) {
               final benchAsync = UniversalChainAsyncBenchmark<
-                  Map<String, rp.ProviderBase<Object?>>> (
+                  Map<String, rp.ProviderBase<Object?>>>(
                 di,
                 chainCount: c,
                 nestingDepth: d,
@@ -111,7 +111,7 @@ class BenchmarkCliRunner {
               );
             } else {
               final benchSync = UniversalChainBenchmark<
-                  Map<String, rp.ProviderBase<Object?>>> (
+                  Map<String, rp.ProviderBase<Object?>>>(
                 di,
                 chainCount: c,
                 nestingDepth: d,
@@ -127,7 +127,8 @@ class BenchmarkCliRunner {
           } else if (config.di == 'yx_scope') {
             final di = YxScopeAdapter();
             if (scenario == UniversalScenario.asyncChain) {
-              final benchAsync = UniversalChainAsyncBenchmark<UniversalYxScopeContainer>(
+              final benchAsync =
+                  UniversalChainAsyncBenchmark<UniversalYxScopeContainer>(
                 di,
                 chainCount: c,
                 nestingDepth: d,
@@ -139,7 +140,8 @@ class BenchmarkCliRunner {
                 repeats: config.repeats,
               );
             } else {
-              final benchSync = UniversalChainBenchmark<UniversalYxScopeContainer>(
+              final benchSync =
+                  UniversalChainBenchmark<UniversalYxScopeContainer>(
                 di,
                 chainCount: c,
                 nestingDepth: d,

benchmark_di/lib/di_adapters/kiwi_adapter.dart

@@ -20,77 +20,80 @@ class KiwiAdapter extends DIAdapter<KiwiContainer> {
     registration(_container);
   }
 
-@override
+  @override
-Registration<KiwiContainer> universalRegistration<S extends Enum>({
+  Registration<KiwiContainer> universalRegistration<S extends Enum>({
-  required S scenario,
+    required S scenario,
-  required int chainCount,
+    required int chainCount,
-  required int nestingDepth,
+    required int nestingDepth,
-  required UniversalBindingMode bindingMode,
+    required UniversalBindingMode bindingMode,
-}) {
+  }) {
-  if (scenario is UniversalScenario) {
+    if (scenario is UniversalScenario) {
-    if (scenario == UniversalScenario.asyncChain ||
+      if (scenario == UniversalScenario.asyncChain ||
-        bindingMode == UniversalBindingMode.asyncStrategy) {
+          bindingMode == UniversalBindingMode.asyncStrategy) {
-      throw UnsupportedError('Kiwi does not support async dependencies or async binding scenarios.');
+        throw UnsupportedError(
-    }
+            'Kiwi does not support async dependencies or async binding scenarios.');
-    return (container) {
+      }
-      switch (scenario) {
+      return (container) {
-        case UniversalScenario.asyncChain:
+        switch (scenario) {
-          break;
+          case UniversalScenario.asyncChain:
-        case UniversalScenario.register:
+            break;
-          container.registerSingleton<UniversalService>(
+          case UniversalScenario.register:
-            (c) => UniversalServiceImpl(value: 'reg', dependency: null),
+            container.registerSingleton<UniversalService>(
-          );
+              (c) => UniversalServiceImpl(value: 'reg', dependency: null),
-          break;
+            );
-        case UniversalScenario.named:
+            break;
-          container.registerFactory<UniversalService>(
+          case UniversalScenario.named:
-            (c) => UniversalServiceImpl(value: 'impl1'), name: 'impl1');
+            container.registerFactory<UniversalService>(
-          container.registerFactory<UniversalService>(
+                (c) => UniversalServiceImpl(value: 'impl1'),
-            (c) => UniversalServiceImpl(value: 'impl2'), name: 'impl2');
+                name: 'impl1');
-          break;
+            container.registerFactory<UniversalService>(
-        case UniversalScenario.chain:
+                (c) => UniversalServiceImpl(value: 'impl2'),
-          for (int chain = 1; chain <= chainCount; chain++) {
+                name: 'impl2');
-            for (int level = 1; level <= nestingDepth; level++) {
+            break;
-              final prevDepName = '${chain}_${level - 1}';
+          case UniversalScenario.chain:
-              final depName = '${chain}_$level';
+            for (int chain = 1; chain <= chainCount; chain++) {
-              switch (bindingMode) {
+              for (int level = 1; level <= nestingDepth; level++) {
-                case UniversalBindingMode.singletonStrategy:
+                final prevDepName = '${chain}_${level - 1}';
-                  container.registerSingleton<UniversalService>(
+                final depName = '${chain}_$level';
-                    (c) => UniversalServiceImpl(
+                switch (bindingMode) {
-                      value: depName,
+                  case UniversalBindingMode.singletonStrategy:
-                      dependency: level > 1
+                    container.registerSingleton<UniversalService>(
-                        ? c.resolve<UniversalService>(prevDepName)
+                        (c) => UniversalServiceImpl(
-                        : null),
+                            value: depName,
-                    name: depName);
+                            dependency: level > 1
-                  break;
+                                ? c.resolve<UniversalService>(prevDepName)
-                case UniversalBindingMode.factoryStrategy:
+                                : null),
-                  container.registerFactory<UniversalService>(
+                        name: depName);
-                    (c) => UniversalServiceImpl(
+                    break;
-                      value: depName,
+                  case UniversalBindingMode.factoryStrategy:
-                      dependency: level > 1
+                    container.registerFactory<UniversalService>(
-                        ? c.resolve<UniversalService>(prevDepName)
+                        (c) => UniversalServiceImpl(
-                        : null),
+                            value: depName,
-                    name: depName);
+                            dependency: level > 1
-                  break;
+                                ? c.resolve<UniversalService>(prevDepName)
-                case UniversalBindingMode.asyncStrategy:
+                                : null),
-                  // Не поддерживается
+                        name: depName);
-                  break;
+                    break;
+                  case UniversalBindingMode.asyncStrategy:
+                    // Не поддерживается
+                    break;
+                }
               }
             }
-          }
+            final depName = '${chainCount}_$nestingDepth';
-          final depName = '${chainCount}_$nestingDepth';
+            container.registerSingleton<UniversalService>(
-          container.registerSingleton<UniversalService>(
+                (c) => c.resolve<UniversalService>(depName));
-            (c) => c.resolve<UniversalService>(depName));
+            break;
-          break;
+          case UniversalScenario.override:
-        case UniversalScenario.override:
+            final depName = '${chainCount}_$nestingDepth';
-          final depName = '${chainCount}_$nestingDepth';
+            container.registerSingleton<UniversalService>(
-          container.registerSingleton<UniversalService>(
+                (c) => c.resolve<UniversalService>(depName));
-            (c) => c.resolve<UniversalService>(depName));
+            break;
-          break;
+        }
-      }
+      };
-    };
+    }
+    throw UnsupportedError('Scenario $scenario not supported by KiwiAdapter');
   }
-  throw UnsupportedError('Scenario $scenario not supported by KiwiAdapter');
-}
 
   @override
   T resolve<T extends Object>({String? named}) {

benchmark_di/lib/di_adapters/yx_scope_adapter.dart

@@ -11,7 +11,8 @@ class YxScopeAdapter extends DIAdapter<UniversalYxScopeContainer> {
   late UniversalYxScopeContainer _scope;
 
   @override
-  void setupDependencies(void Function(UniversalYxScopeContainer container) registration) {
+  void setupDependencies(
+      void Function(UniversalYxScopeContainer container) registration) {
     _scope = UniversalYxScopeContainer();
     registration(_scope);
   }
@@ -45,7 +46,8 @@ class YxScopeAdapter extends DIAdapter<UniversalYxScopeContainer> {
   }
 
   @override
-  Registration<UniversalYxScopeContainer> universalRegistration<S extends Enum>({
+  Registration<UniversalYxScopeContainer>
+      universalRegistration<S extends Enum>({
     required S scenario,
     required int chainCount,
     required int nestingDepth,
@@ -112,7 +114,8 @@ class YxScopeAdapter extends DIAdapter<UniversalYxScopeContainer> {
             // handled at benchmark level
             break;
         }
-        if (scenario == UniversalScenario.chain || scenario == UniversalScenario.override) {
+        if (scenario == UniversalScenario.chain ||
+            scenario == UniversalScenario.override) {
           final depName = '${chainCount}_$nestingDepth';
           final lastDep = scope.dep<UniversalService>(
             () => scope.depFor<UniversalService>(name: depName).get,
@@ -121,6 +124,7 @@ class YxScopeAdapter extends DIAdapter<UniversalYxScopeContainer> {
         }
       };
     }
-    throw UnsupportedError('Scenario $scenario not supported by YxScopeAdapter');
+    throw UnsupportedError(
+        'Scenario $scenario not supported by YxScopeAdapter');
   }
 }

benchmark_di/pubspec.lock

@@ -47,7 +47,7 @@ packages:
       path: "../cherrypick"
       relative: true
     source: path
-    version: "3.0.0-dev.12"
+    version: "3.0.2"
   collection:
     dependency: transitive
     description:

benchmark_di/pubspec.yaml

@@ -4,7 +4,7 @@ publish_to: none
 description: Universal benchmark for any DI library (cherrypick, get_it, and others)
 
 environment:
-  sdk: '>=3.0.0 <4.0.0'
+  sdk: '>=3.2.0 <4.0.0'
 
 dependencies:
   cherrypick:

cherrypick/CHANGELOG.md

@@ -1,3 +1,16 @@
+## 3.0.2
+
+ - **FIX**(test): fix warning.
+ - **FIX**(scope): properly clear binding and module references on dispose.
+
+## 3.0.1
+
+ - **DOCS**: add Netlify deployment status badge to README files.
+
+## 3.0.0
+
+ - Graduate package to a stable release. See pre-releases prior to this version for changelog entries.
+
 ## 3.0.0-dev.13
 
  - **FIX**: fix examples.

cherrypick/README.md

@@ -1,3 +1,8 @@
+[![Melos + FVM CI](https://github.com/pese-git/cherrypick/actions/workflows/pipeline.yml/badge.svg)](https://github.com/pese-git/cherrypick/actions/workflows/pipeline.yml)
+[![Netlify Status](https://api.netlify.com/api/v1/badges/3c3e0f98-27a9-4dd4-9eab-4be0b96798b8/deploy-status)](https://app.netlify.com/projects/cherrypick-di/deploys)
+
+---
+
 # CherryPick
 
 `cherrypick` is a flexible and lightweight dependency injection library for Dart and Flutter.

cherrypick/example/disposable_example.dart

@@ -37,4 +37,4 @@ void main() {
   // Освобождаем все ресурсы
   scope.dispose();
   print('Service wasDisposed = ${service.wasDisposed}'); // true
-}
+}

cherrypick/example/pubspec.yaml

@@ -4,7 +4,7 @@ homepage: localhost
 publish_to: none
 
 environment:
-  sdk: ">=2.12.0 <3.0.0"
+  sdk: '>=3.2.0 <4.0.0'
 
 
 dependencies:

cherrypick/lib/src/binding.dart

@@ -191,6 +191,7 @@ class Binding<T> {
   /// }
   /// ```
   /// This restriction only applies to [toInstance] bindings.
+  // ignore: deprecated_member_use_from_same_package
   /// With [toProvide]/[toProvideAsync] you may freely use `scope.resolve<T>()` in the builder or provider function.
   Binding<T> toInstance(Instance<T> value) {
     _resolver = InstanceResolver<T>(value);
@@ -222,17 +223,17 @@ class Binding<T> {
 
   @Deprecated('Use toInstance instead of toInstanceAsync')
   Binding<T> toInstanceAsync(Instance<T> value) {
-    return this.toInstance(value);
+    return toInstance(value);
   }
 
   @Deprecated('Use toProvide instead of toProvideAsync')
   Binding<T> toProvideAsync(Provider<T> value) {
-    return this.toProvide(value);
+    return toProvide(value);
   }
 
   @Deprecated('Use toProvideWithParams instead of toProvideAsyncWithParams')
   Binding<T> toProvideAsyncWithParams(ProviderWithParams<T> value) {
-    return this.toProvideWithParams(value);
+    return toProvideWithParams(value);
   }
 
   /// Marks this binding as singleton (will only create and cache one instance per scope).

cherrypick/lib/src/scope.dart

@@ -498,5 +498,10 @@ class Scope with CycleDetectionMixin, GlobalCycleDetectionMixin {
       await d.dispose();
     }
     _disposables.clear();
+
+    // Clear modules
+    _modulesList.clear();
+    // Clear binding-index
+    _bindingResolvers.clear();
   }
 }

cherrypick/pubspec.yaml

@@ -1,8 +1,8 @@
 name: cherrypick
 description: Cherrypick is a small dependency injection (DI) library for dart/flutter projects.
-version: 3.0.0-dev.13
+version: 3.0.2
-homepage: https://cherrypick-di.dev/
+homepage: https://cherrypick-di.netlify.app
-documentation: https://cherrypick-di.dev/docs/intro
+documentation: https://cherrypick-di.netlify.app/docs/intro
 repository: https://github.com/pese-git/cherrypick
 issue_tracker: https://github.com/pese-git/cherrypick/issues
 topics:
@@ -13,14 +13,14 @@ topics:
   - inversion-of-control
 
 environment:
-  sdk: ">=3.5.2 <4.0.0"
+  sdk: '>=3.2.0 <4.0.0'
 
 dependencies:
   meta: ^1.3.0
 
 dev_dependencies:
-  lints: ^5.0.0
+  lints: ^4.0.0
-  test: ^1.25.15
+  test: ^1.25.6
 
-  mockito: ^5.0.6
+  mockito: ^5.4.4
   melos: ^6.3.2

cherrypick/test/binding_memory_leak_test.dart

@@ -0,0 +1,65 @@
+import 'dart:async';
+import 'package:cherrypick/cherrypick.dart';
+import 'package:test/test.dart';
+
+class HeavyService implements Disposable {
+  static int instanceCount = 0;
+  HeavyService() {
+    instanceCount++;
+    print('HeavyService created. Instance count: '
+        '\u001b[32m$instanceCount\u001b[0m');
+  }
+
+  @override
+  void dispose() {
+    instanceCount--;
+    print('HeavyService disposed. Instance count: '
+        '\u001b[31m$instanceCount\u001b[0m');
+  }
+
+  static final Finalizer<String> _finalizer = Finalizer((msg) {
+    print('GC FINALIZED HeavyService: $msg');
+  });
+  void registerFinalizer() => _finalizer.attach(this, toString(), detach: this);
+}
+
+class HeavyModule extends Module {
+  @override
+  void builder(Scope scope) {
+    bind<HeavyService>().toProvide(() => HeavyService());
+  }
+}
+
+void main() {
+  test('Binding memory is cleared after closing and reopening scope', () async {
+    final root = CherryPick.openRootScope();
+    for (int i = 0; i < 10; i++) {
+      print('\nIteration $i -------------------------------');
+      final subScope = root.openSubScope('leak-test-scope');
+      subScope.installModules([HeavyModule()]);
+      final service = subScope.resolve<HeavyService>();
+      expect(service, isNotNull);
+      await root.closeSubScope('leak-test-scope');
+      // Dart GC не сразу удаляет освобождённые объекты, добавляем паузу и вызываем GC.
+      await Future.delayed(const Duration(milliseconds: 200));
+    }
+
+    // Если dispose не вызвался, instanceCount > 0 => утечка.
+    expect(HeavyService.instanceCount, equals(0));
+  });
+
+  test('Service is finalized after scope is closed/cleaned', () async {
+    final root = CherryPick.openRootScope();
+    HeavyService? ref;
+    {
+      final sub = root.openSubScope('s');
+      sub.installModules([HeavyModule()]);
+      ref = sub.resolve<HeavyService>();
+      ref.registerFinalizer();
+      expect(HeavyService.instanceCount, 1);
+      await root.closeSubScope('s');
+    }
+    await Future.delayed(const Duration(seconds: 2));
+    expect(HeavyService.instanceCount, 0);
+  });
+}

cherrypick_annotations/CHANGELOG.md

@@ -1,3 +1,27 @@
+## 4.0.0-dev.0
+
+> Note: This release has breaking changes.
+
+ - **BREAKING** **FEAT**: update Dart SDK minimum versions.
+
+## 3.0.3
+
+## 3.0.2
+
+ - Graduate package to a stable release. See pre-releases prior to this version for changelog entries.
+
+## 3.0.2-dev.0
+
+ - **REFACTOR**(generator): migrate cherrypick_generator to analyzer element2 API.
+
+## 3.0.1
+
+ - **DOCS**: add Netlify deployment status badge to README files.
+
+## 3.0.0
+
+ - Graduate package to a stable release. See pre-releases prior to this version for changelog entries.
+
 ## 3.0.0-dev.0
 
  - chore(cherrypick_annotations): sync version with cherrypick 3.0.0-dev.0

cherrypick_annotations/README.md

@@ -1,3 +1,8 @@
+[![Melos + FVM CI](https://github.com/pese-git/cherrypick/actions/workflows/pipeline.yml/badge.svg)](https://github.com/pese-git/cherrypick/actions/workflows/pipeline.yml)
+[![Netlify Status](https://api.netlify.com/api/v1/badges/3c3e0f98-27a9-4dd4-9eab-4be0b96798b8/deploy-status)](https://app.netlify.com/projects/cherrypick-di/deploys)
+
+---
+
 # cherrypick_annotations
 
 [![License](https://img.shields.io/badge/license-Apache%202.0-blue.svg)](LICENSE)

cherrypick_annotations/pubspec.yaml

@@ -1,9 +1,9 @@
 name: cherrypick_annotations
 description: |
   Set of annotations for CherryPick dependency injection library. Enables code generation and declarative DI for Dart & Flutter projects.
-version: 3.0.0-dev.0
+version: 4.0.0-dev.0
-homepage: https://cherrypick-di.dev/
+homepage: https://cherrypick-di.netlify.app
-documentation: https://cherrypick-di.dev/docs/intro
+documentation: https://cherrypick-di.netlify.app/docs/intro
 repository: https://github.com/pese-git/cherrypick/cherrypick_annotations
 issue_tracker: https://github.com/pese-git/cherrypick/issues
 topics:
@@ -14,7 +14,7 @@ topics:
   - inversion-of-control
 
 environment:
-  sdk: ">=3.5.2 <4.0.0"
+  sdk: ">=3.9.0 <4.0.0"
 
 # Add regular dependencies here.
 dependencies:
@@ -22,5 +22,5 @@ dependencies:
   # path: ^1.8.0
 
 dev_dependencies:
-  lints: ^5.0.0
+  lints: ^6.0.0
   test: ^1.25.8

cherrypick_flutter/CHANGELOG.md

@@ -1,3 +1,15 @@
+## 3.0.2
+
+ - Update a dependency to the latest release.
+
+## 3.0.1
+
+ - **DOCS**: add Netlify deployment status badge to README files.
+
+## 3.0.0
+
+ - Graduate package to a stable release. See pre-releases prior to this version for changelog entries.
+
 ## 3.0.0-dev.1
 
  - Update a dependency to the latest release.

cherrypick_flutter/README.md

@@ -1,3 +1,8 @@
+[![Melos + FVM CI](https://github.com/pese-git/cherrypick/actions/workflows/pipeline.yml/badge.svg)](https://github.com/pese-git/cherrypick/actions/workflows/pipeline.yml)
+[![Netlify Status](https://api.netlify.com/api/v1/badges/3c3e0f98-27a9-4dd4-9eab-4be0b96798b8/deploy-status)](https://app.netlify.com/projects/cherrypick-di/deploys)
+
+---
+
 # CherryPick Flutter
 
 `cherrypick_flutter` offers a Flutter integration to access and manage dependency injection scopes using the `CherryPickProvider`. This setup facilitates accessing the root scope directly from the widget tree, providing a straightforward mechanism for dependences management within Flutter applications.

cherrypick_flutter/pubspec.yaml

@@ -1,8 +1,8 @@
 name: cherrypick_flutter
 description: "Flutter library that allows access to the root scope through the context using `CherryPickProvider`."
-version: 3.0.0-dev.1
+version: 3.0.2
-homepage: https://cherrypick-di.dev/
+homepage: https://cherrypick-di.netlify.app
-documentation: https://cherrypick-di.dev/docs/intro
+documentation: https://cherrypick-di.netlify.app/docs/intro
 repository: https://github.com/pese-git/cherrypick
 issue_tracker: https://github.com/pese-git/cherrypick/issues
 topics:
@@ -13,19 +13,19 @@ topics:
   - inversion-of-control
 
 environment:
-  sdk: ">=3.5.2 <4.0.0"
+  sdk: '>=3.2.0 <4.0.0'
-  flutter: ">=3.24.0"
+  flutter: ">=3.16.0"
 
 dependencies:
   flutter:
     sdk: flutter
-  cherrypick: ^3.0.0-dev.13
+  cherrypick: ^3.0.2
 
 dev_dependencies:
   flutter_test:
     sdk: flutter
-  flutter_lints: ^5.0.0
+  flutter_lints: ^4.0.0
-  test: ^1.25.7
+  test: ^1.25.6
   melos: ^6.3.2
 
 # For information on the generic Dart part of this file, see the

cherrypick_generator/CHANGELOG.md

@@ -1,3 +1,27 @@
+## 4.0.0-dev.0
+
+> Note: This release has breaking changes.
+
+ - **BREAKING** **FEAT**: update Dart SDK minimum versions.
+
+## 3.0.3
+
+## 3.0.2
+
+ - Graduate package to a stable release. See pre-releases prior to this version for changelog entries.
+
+## 3.0.2-dev.0
+
+ - **REFACTOR**(generator): migrate cherrypick_generator to analyzer element2 API.
+
+## 3.0.1
+
+ - **DOCS**: add Netlify deployment status badge to README files.
+
+## 3.0.0
+
+ - Graduate package to a stable release. See pre-releases prior to this version for changelog entries.
+
 ## 3.0.0-dev.0
 
  - chore(cherrypick_generator): sync version with cherrypick 3.0.0-dev.12

cherrypick_generator/README.md

@@ -1,3 +1,8 @@
+[![Melos + FVM CI](https://github.com/pese-git/cherrypick/actions/workflows/pipeline.yml/badge.svg)](https://github.com/pese-git/cherrypick/actions/workflows/pipeline.yml)
+[![Netlify Status](https://api.netlify.com/api/v1/badges/3c3e0f98-27a9-4dd4-9eab-4be0b96798b8/deploy-status)](https://app.netlify.com/projects/cherrypick-di/deploys)
+
+---
+
 # Cherrypick Generator
 
 **Cherrypick Generator** is a Dart code generation library for automating dependency injection (DI) boilerplate. It processes classes and fields annotated with [cherrypick_annotations](https://pub.dev/packages/cherrypick_annotations) and generates registration code for services, modules, and field injection for classes marked as `@injectable`. It supports advanced DI features such as scopes, named bindings, parameters, and asynchronous dependencies.

cherrypick_generator/analysis_options.yaml

@@ -31,4 +31,5 @@ include: package:lints/recommended.yaml
 
 analyzer:
   errors:
-    deprecated_member_use: ignore
+    deprecated_member_use: ignore
+    unintended_html_in_doc_comment: ignore

cherrypick_generator/lib/inject_generator.dart

@@ -11,13 +11,12 @@
 // limitations under the License.
 //
 
-import 'dart:async';
 import 'package:analyzer/dart/constant/value.dart';
+import 'package:analyzer/dart/element/element2.dart';
 import 'package:analyzer/dart/element/nullability_suffix.dart';
 import 'package:analyzer/dart/element/type.dart';
 import 'package:build/build.dart';
 import 'package:source_gen/source_gen.dart';
-import 'package:analyzer/dart/element/element.dart';
 import 'package:cherrypick_annotations/cherrypick_annotations.dart' as ann;
 
 /// CherryPick DI field injector generator for codegen.
@@ -100,12 +99,12 @@ class InjectGenerator extends GeneratorForAnnotation<ann.injectable> {
   /// }
   /// ```
   @override
-  FutureOr<String> generateForAnnotatedElement(
+  dynamic generateForAnnotatedElement(
-    Element element,
+    Element2 element,
     ConstantReader annotation,
     BuildStep buildStep,
   ) {
-    if (element is! ClassElement) {
+    if (element is! ClassElement2) {
       throw InvalidGenerationSourceError(
         '@injectable() can only be applied to classes.',
         element: element,
@@ -113,7 +112,7 @@ class InjectGenerator extends GeneratorForAnnotation<ann.injectable> {
     }
 
     final classElement = element;
-    final className = classElement.name;
+    final className = classElement.firstFragment.name2;
     final mixinName = '_\$$className';
 
     final buffer = StringBuffer()
@@ -121,8 +120,9 @@ class InjectGenerator extends GeneratorForAnnotation<ann.injectable> {
       ..writeln('  void _inject($className instance) {');
 
     // Collect and process all @inject fields
-    final injectFields =
+    final injectFields = classElement.fields2
-        classElement.fields.where(_isInjectField).map(_parseInjectField);
+        .where((f) => _isInjectField(f))
+        .map((f) => _parseInjectField(f));
 
     for (final parsedField in injectFields) {
       buffer.writeln(_generateInjectionLine(parsedField));
@@ -138,8 +138,8 @@ class InjectGenerator extends GeneratorForAnnotation<ann.injectable> {
   /// Returns true if a field is annotated with `@inject`.
   ///
   /// Used to detect which fields should be processed for injection.
-  static bool _isInjectField(FieldElement field) {
+  static bool _isInjectField(FieldElement2 field) {
-    return field.metadata.any(
+    return field.firstFragment.metadata2.annotations.any(
       (m) => m.computeConstantValue()?.type?.getDisplayString() == 'inject',
     );
   }
@@ -149,11 +149,11 @@ class InjectGenerator extends GeneratorForAnnotation<ann.injectable> {
   ///
   /// Converts Dart field declaration and all parameterizing injection-related
   /// annotations into a [_ParsedInjectField] which is used for codegen.
-  static _ParsedInjectField _parseInjectField(FieldElement field) {
+  static _ParsedInjectField _parseInjectField(FieldElement2 field) {
     String? scopeName;
     String? namedValue;
 
-    for (final meta in field.metadata) {
+    for (final meta in field.firstFragment.metadata2.annotations) {
       final DartObject? obj = meta.computeConstantValue();
       final type = obj?.type?.getDisplayString();
       if (type == 'scope') {
@@ -177,15 +177,15 @@ class InjectGenerator extends GeneratorForAnnotation<ann.injectable> {
     }
 
     // Determine nullability for field types like T? or Future<T?>
-    bool isNullable = dartType.nullabilitySuffix ==
+    bool isNullable =
-            NullabilitySuffix.question ||
+        dartType.nullabilitySuffix == NullabilitySuffix.question ||
         (dartType is ParameterizedType &&
-            (dartType)
+            (dartType).typeArguments.any(
-                .typeArguments
+              (t) => t.nullabilitySuffix == NullabilitySuffix.question,
-                .any((t) => t.nullabilitySuffix == NullabilitySuffix.question));
+            ));
 
     return _ParsedInjectField(
-      fieldName: field.name,
+      fieldName: field.firstFragment.name2 ?? '',
       coreType: coreTypeName.replaceAll('?', ''), // удаляем "?" на всякий
       isFuture: isFuture,
       isNullable: isNullable,
@@ -207,11 +207,11 @@ class InjectGenerator extends GeneratorForAnnotation<ann.injectable> {
   String _generateInjectionLine(_ParsedInjectField field) {
     final resolveMethod = field.isFuture
         ? (field.isNullable
-            ? 'tryResolveAsync<${field.coreType}>'
+              ? 'tryResolveAsync<${field.coreType}>'
-            : 'resolveAsync<${field.coreType}>')
+              : 'resolveAsync<${field.coreType}>')
         : (field.isNullable
-            ? 'tryResolve<${field.coreType}>'
+              ? 'tryResolve<${field.coreType}>'
-            : 'resolve<${field.coreType}>');
+              : 'resolve<${field.coreType}>');
 
     final openCall = (field.scopeName != null && field.scopeName!.isNotEmpty)
         ? "CherryPick.openScope(scopeName: '${field.scopeName}')"

cherrypick_generator/lib/module_generator.dart

@@ -11,7 +11,7 @@
 // limitations under the License.
 //
 
-import 'package:analyzer/dart/element/element.dart';
+import 'package:analyzer/dart/element/element2.dart';
 import 'package:build/build.dart';
 import 'package:source_gen/source_gen.dart';
 import 'package:cherrypick_annotations/cherrypick_annotations.dart' as ann;
@@ -79,12 +79,12 @@ class ModuleGenerator extends GeneratorForAnnotation<ann.module> {
   ///
   /// See file-level docs for usage and generated output example.
   @override
-  String generateForAnnotatedElement(
+  dynamic generateForAnnotatedElement(
-    Element element,
+    Element2 element,
     ConstantReader annotation,
     BuildStep buildStep,
   ) {
-    if (element is! ClassElement) {
+    if (element is! ClassElement2) {
       throw InvalidGenerationSourceError(
         '@module() can only be applied to classes.',
         element: element,

cherrypick_generator/lib/src/annotation_validator.dart

@@ -12,6 +12,7 @@
 //
 
 import 'package:analyzer/dart/element/element.dart';
+import 'package:analyzer/dart/element/element2.dart';
 import 'exceptions.dart';
 import 'metadata_utils.dart';
 
@@ -52,8 +53,10 @@ class AnnotationValidator {
   ///   - Parameter validation for method arguments.
   ///
   /// Throws [AnnotationValidationException] on any violation.
-  static void validateMethodAnnotations(MethodElement method) {
+  static void validateMethodAnnotations(MethodElement2 method) {
-    final annotations = _getAnnotationNames(method.metadata);
+    final annotations = _getAnnotationNames(
+      method.firstFragment.metadata2.annotations,
+    );
 
     _validateMutuallyExclusiveAnnotations(method, annotations);
     _validateAnnotationCombinations(method, annotations);
@@ -68,8 +71,10 @@ class AnnotationValidator {
   ///   - Correct scope naming if present.
   ///
   /// Throws [AnnotationValidationException] if checks fail.
-  static void validateFieldAnnotations(FieldElement field) {
+  static void validateFieldAnnotations(FieldElement2 field) {
-    final annotations = _getAnnotationNames(field.metadata);
+    final annotations = _getAnnotationNames(
+      field.firstFragment.metadata2.annotations,
+    );
 
     _validateInjectFieldAnnotations(field, annotations);
   }
@@ -82,8 +87,10 @@ class AnnotationValidator {
   ///   - Provides helpful context for error/warning reporting.
   ///
   /// Throws [AnnotationValidationException] if checks fail.
-  static void validateClassAnnotations(ClassElement classElement) {
+  static void validateClassAnnotations(ClassElement2 classElement) {
-    final annotations = _getAnnotationNames(classElement.metadata);
+    final annotations = _getAnnotationNames(
+      classElement.firstFragment.metadata2.annotations,
+    );
 
     _validateModuleClassAnnotations(classElement, annotations);
     _validateInjectableClassAnnotations(classElement, annotations);
@@ -104,7 +111,7 @@ class AnnotationValidator {
   ///
   /// For example, `@instance` and `@provide` cannot both be present.
   static void _validateMutuallyExclusiveAnnotations(
-    MethodElement method,
+    MethodElement2 method,
     List<String> annotations,
   ) {
     // @instance and @provide are mutually exclusive
@@ -127,7 +134,7 @@ class AnnotationValidator {
   /// - One of `@instance` or `@provide` must be present for a registration method
   /// - Validates singleton usage
   static void _validateAnnotationCombinations(
-    MethodElement method,
+    MethodElement2 method,
     List<String> annotations,
   ) {
     // @params can only be used with @provide
@@ -165,7 +172,7 @@ class AnnotationValidator {
 
   /// Singleton-specific method annotation checks.
   static void _validateSingletonUsage(
-    MethodElement method,
+    MethodElement2 method,
     List<String> annotations,
   ) {
     // Singleton with params might not make sense in some contexts
@@ -181,18 +188,17 @@ class AnnotationValidator {
         'Singleton methods cannot return void',
         element: method,
         suggestion: 'Remove @singleton annotation or change return type',
-        context: {
+        context: {'method_name': method.displayName, 'return_type': returnType},
-          'method_name': method.displayName,
-          'return_type': returnType,
-        },
       );
     }
   }
 
   /// Validates extra requirements or syntactic rules for annotation arguments, like @named.
-  static void _validateAnnotationParameters(MethodElement method) {
+  static void _validateAnnotationParameters(MethodElement2 method) {
     // Validate @named annotation parameters
-    final namedValue = MetadataUtils.getNamedValue(method.metadata);
+    final namedValue = MetadataUtils.getNamedValue(
+      method.firstFragment.metadata2.annotations,
+    );
     if (namedValue != null) {
       if (namedValue.isEmpty) {
         throw AnnotationValidationException(
@@ -222,8 +228,10 @@ class AnnotationValidator {
     }
 
     // Validate method parameters for @params usage
-    for (final param in method.parameters) {
+    for (final param in method.formalParameters) {
-      final paramAnnotations = _getAnnotationNames(param.metadata);
+      final paramAnnotations = _getAnnotationNames(
+        param.firstFragment.metadata2.annotations,
+      );
       if (paramAnnotations.contains('params')) {
         _validateParamsParameter(param, method);
       }
@@ -232,7 +240,9 @@ class AnnotationValidator {
 
   /// Checks that @params is used with compatible parameter type.
   static void _validateParamsParameter(
-      ParameterElement param, MethodElement method) {
+    FormalParameterElement param,
+    MethodElement2 method,
+  ) {
     // @params parameter should typically be dynamic or Map<String, dynamic>
     final paramType = param.type.getDisplayString();
     if (paramType != 'dynamic' &&
@@ -256,7 +266,7 @@ class AnnotationValidator {
 
   /// Checks field-level annotation for valid injectable fields.
   static void _validateInjectFieldAnnotations(
-    FieldElement field,
+    FieldElement2 field,
     List<String> annotations,
   ) {
     if (!annotations.contains('inject')) {
@@ -270,15 +280,12 @@ class AnnotationValidator {
         'Cannot inject void type',
         element: field,
         suggestion: 'Use a concrete type instead of void',
-        context: {
+        context: {'field_name': field.displayName, 'field_type': fieldType},
-          'field_name': field.displayName,
-          'field_type': fieldType,
-        },
       );
     }
 
     // Validate scope annotation if present
-    for (final meta in field.metadata) {
+    for (final meta in field.firstFragment.metadata2.annotations) {
       final obj = meta.computeConstantValue();
       final type = obj?.type?.getDisplayString();
       if (type == 'scope') {
@@ -290,7 +297,7 @@ class AnnotationValidator {
 
   /// Checks @module usage: must have at least one DI method, each with DI-annotation.
   static void _validateModuleClassAnnotations(
-    ClassElement classElement,
+    ClassElement2 classElement,
     List<String> annotations,
   ) {
     if (!annotations.contains('module')) {
@@ -298,8 +305,9 @@ class AnnotationValidator {
     }
 
     // Check if class has public methods
-    final publicMethods =
+    final publicMethods = classElement.methods2
-        classElement.methods.where((m) => m.isPublic).toList();
+        .where((m) => m.isPublic)
+        .toList();
     if (publicMethods.isEmpty) {
       throw AnnotationValidationException(
         'Module class must have at least one public method',
@@ -314,7 +322,9 @@ class AnnotationValidator {
 
     // Validate that public methods have appropriate annotations
     for (final method in publicMethods) {
-      final methodAnnotations = _getAnnotationNames(method.metadata);
+      final methodAnnotations = _getAnnotationNames(
+        method.firstFragment.metadata2.annotations,
+      );
       if (!methodAnnotations.contains('instance') &&
           !methodAnnotations.contains('provide')) {
         throw AnnotationValidationException(
@@ -332,7 +342,7 @@ class AnnotationValidator {
 
   /// Checks @injectable usage on classes and their fields.
   static void _validateInjectableClassAnnotations(
-    ClassElement classElement,
+    ClassElement2 classElement,
     List<String> annotations,
   ) {
     if (!annotations.contains('injectable')) {
@@ -340,8 +350,10 @@ class AnnotationValidator {
     }
 
     // Check if class has injectable fields
-    final injectFields = classElement.fields.where((f) {
+    final injectFields = classElement.fields2.where((f) {
-      final fieldAnnotations = _getAnnotationNames(f.metadata);
+      final fieldAnnotations = _getAnnotationNames(
+        f.firstFragment.metadata2.annotations,
+      );
       return fieldAnnotations.contains('inject');
     }).toList();
 

cherrypick_generator/lib/src/bind_spec.dart

@@ -11,7 +11,7 @@
 // limitations under the License.
 //
 
-import 'package:analyzer/dart/element/element.dart';
+import 'package:analyzer/dart/element/element2.dart';
 
 import 'bind_parameters_spec.dart';
 import 'metadata_utils.dart';
@@ -25,7 +25,7 @@ enum BindingType {
   instance,
 
   /// Provider/factory function (@provide).
-  provide;
+  provide,
 }
 
 /// ---------------------------------------------------------------------------
@@ -155,7 +155,8 @@ class BindSpec {
     switch (bindingType) {
       case BindingType.instance:
         throw StateError(
-            'Internal error: _generateWithParamsProvideClause called for @instance binding with @params.');
+          'Internal error: _generateWithParamsProvideClause called for @instance binding with @params.',
+        );
       //return isAsyncInstance
       //    ? '.toInstanceAsync(($fnArgs) => $methodName($fnArgs))'
       //    : '.toInstance(($fnArgs) => $methodName($fnArgs))';
@@ -189,20 +190,24 @@ class BindSpec {
       case BindingType.provide:
         if (isAsyncProvide) {
           if (needsMultiline) {
-            final lambdaIndent =
+            final lambdaIndent = (isSingleton || named != null)
-                (isSingleton || named != null) ? indent + 6 : indent + 2;
+                ? indent + 6
-            final closingIndent =
+                : indent + 2;
-                (isSingleton || named != null) ? indent + 4 : indent;
+            final closingIndent = (isSingleton || named != null)
+                ? indent + 4
+                : indent;
             return '.toProvideAsync(\n${' ' * lambdaIndent}() => $methodName($argsStr),\n${' ' * closingIndent})';
           } else {
             return '.toProvideAsync(() => $methodName($argsStr))';
           }
         } else {
           if (needsMultiline) {
-            final lambdaIndent =
+            final lambdaIndent = (isSingleton || named != null)
-                (isSingleton || named != null) ? indent + 6 : indent + 2;
+                ? indent + 6
-            final closingIndent =
+                : indent + 2;
-                (isSingleton || named != null) ? indent + 4 : indent;
+            final closingIndent = (isSingleton || named != null)
+                ? indent + 4
+                : indent;
             return '.toProvide(\n${' ' * lambdaIndent}() => $methodName($argsStr),\n${' ' * closingIndent})';
           } else {
             return '.toProvide(() => $methodName($argsStr))';
@@ -246,7 +251,7 @@ class BindSpec {
   /// print(bindSpec.returnType); // e.g., 'Logger'
   /// ```
   /// Throws [AnnotationValidationException] or [CodeGenerationException] if invalid.
-  static BindSpec fromMethod(MethodElement method) {
+  static BindSpec fromMethod(MethodElement2 method) {
     try {
       // Validate method annotations
       AnnotationValidator.validateMethodAnnotations(method);
@@ -254,28 +259,44 @@ class BindSpec {
       // Parse return type using improved type parser
       final parsedReturnType = TypeParser.parseType(method.returnType, method);
 
-      final methodName = method.displayName;
+      final methodName = method.firstFragment.name2 ?? '';
 
       // Check for @singleton annotation.
-      final isSingleton = MetadataUtils.anyMeta(method.metadata, 'singleton');
+      final isSingleton = MetadataUtils.anyMeta(
+        method.firstFragment.metadata2.annotations,
+        'singleton',
+      );
 
       // Get @named value if present.
-      final named = MetadataUtils.getNamedValue(method.metadata);
+      final named = MetadataUtils.getNamedValue(
+        method.firstFragment.metadata2.annotations,
+      );
 
       // Parse each method parameter.
       final params = <BindParameterSpec>[];
       bool hasParams = false;
-      for (final p in method.parameters) {
+      for (final p in method.formalParameters) {
         final typeStr = p.type.getDisplayString();
-        final paramNamed = MetadataUtils.getNamedValue(p.metadata);
+        final paramNamed = MetadataUtils.getNamedValue(
-        final isParams = MetadataUtils.anyMeta(p.metadata, 'params');
+          p.firstFragment.metadata2.annotations,
+        );
+        final isParams = MetadataUtils.anyMeta(
+          p.firstFragment.metadata2.annotations,
+          'params',
+        );
         if (isParams) hasParams = true;
         params.add(BindParameterSpec(typeStr, paramNamed, isParams: isParams));
       }
 
       // Determine bindingType: @instance or @provide.
-      final hasInstance = MetadataUtils.anyMeta(method.metadata, 'instance');
+      final hasInstance = MetadataUtils.anyMeta(
-      final hasProvide = MetadataUtils.anyMeta(method.metadata, 'provide');
+        method.firstFragment.metadata2.annotations,
+        'instance',
+      );
+      final hasProvide = MetadataUtils.anyMeta(
+        method.firstFragment.metadata2.annotations,
+        'provide',
+      );
 
       if (!hasInstance && !hasProvide) {
         throw AnnotationValidationException(
@@ -290,8 +311,9 @@ class BindSpec {
         );
       }
 
-      final bindingType =
+      final bindingType = hasInstance
-          hasInstance ? BindingType.instance : BindingType.provide;
+          ? BindingType.instance
+          : BindingType.provide;
 
       // PROHIBIT @params with @instance bindings!
       if (bindingType == BindingType.instance && hasParams) {

cherrypick_generator/lib/src/exceptions.dart

@@ -11,7 +11,7 @@
 // limitations under the License.
 //
 
-import 'package:analyzer/dart/element/element.dart';
+import 'package:analyzer/dart/element/element2.dart';
 import 'package:source_gen/source_gen.dart';
 
 /// ---------------------------------------------------------------------------
@@ -48,21 +48,21 @@ class CherryPickGeneratorException extends InvalidGenerationSourceError {
 
   CherryPickGeneratorException(
     String message, {
-    required Element element,
+    required Element2 element,
     required this.category,
     this.suggestion,
     this.context,
   }) : super(
-          _formatMessage(message, category, suggestion, context, element),
+         _formatMessage(message, category, suggestion, context, element),
-          element: element,
+         element: element,
-        );
+       );
 
   static String _formatMessage(
     String message,
     String category,
     String? suggestion,
     Map<String, dynamic>? context,
-    Element element,
+    Element2 element,
   ) {
     final buffer = StringBuffer();
 
@@ -74,7 +74,9 @@ class CherryPickGeneratorException extends InvalidGenerationSourceError {
     buffer.writeln('Context:');
     buffer.writeln('  Element: ${element.displayName}');
     buffer.writeln('  Type: ${element.runtimeType}');
-    buffer.writeln('  Location: ${element.source?.fullName ?? 'unknown'}');
+    buffer.writeln(
+      '  Location: ${element.firstFragment.libraryFragment?.source.fullName ?? 'unknown'}',
+    );
 
     // Try to show enclosing element info for extra context
     try {

cherrypick_generator/lib/src/generated_class.dart

@@ -12,6 +12,7 @@
 //
 
 import 'package:analyzer/dart/element/element.dart';
+import 'package:analyzer/dart/element/element2.dart';
 import 'bind_spec.dart';
 
 /// ---------------------------------------------------------------------------
@@ -75,14 +76,11 @@ class GeneratedClass {
   /// final gen = GeneratedClass.fromClassElement(classElement);
   /// print(gen.generatedClassName); // e.g. $AppModule
   /// ```
-  static GeneratedClass fromClassElement(ClassElement element) {
+  static GeneratedClass fromClassElement(ClassElement2 element) {
-    final className = element.displayName;
+    final className = element.firstFragment.name2 ?? '';
-    // Generated class name with '$' prefix (standard for generated Dart code).
     final generatedClassName = r'$' + className;
-    // Get source file name
+    final sourceFile = element.firstFragment.libraryFragment.source.shortName;
-    final sourceFile = element.source.shortName;
+    final binds = element.methods2
-    // Collect bindings for all non-abstract methods.
-    final binds = element.methods
         .where((m) => !m.isAbstract)
         .map(BindSpec.fromMethod)
         .toList();

cherrypick_generator/lib/src/metadata_utils.dart

@@ -41,14 +41,16 @@ class MetadataUtils {
   /// bool isSingleton = MetadataUtils.anyMeta(myMethod.metadata, 'singleton');
   /// ```
   static bool anyMeta(List<ElementAnnotation> meta, String typeName) {
-    return meta.any((m) =>
+    return meta.any(
-        m
+      (m) =>
-            .computeConstantValue()
+          m
-            ?.type
+              .computeConstantValue()
-            ?.getDisplayString()
+              ?.type
-            .toLowerCase()
+              ?.getDisplayString()
-            .contains(typeName.toLowerCase()) ??
+              .toLowerCase()
-        false);
+              .contains(typeName.toLowerCase()) ??
+          false,
+    );
   }
 
   /// Extracts the string value from a `@named('value')` annotation if present in [meta].

cherrypick_generator/lib/src/type_parser.dart

@@ -11,7 +11,7 @@
 // limitations under the License.
 //
 
-import 'package:analyzer/dart/element/element.dart';
+import 'package:analyzer/dart/element/element2.dart';
 import 'package:analyzer/dart/element/nullability_suffix.dart';
 import 'package:analyzer/dart/element/type.dart';
 import 'exceptions.dart';
@@ -45,7 +45,7 @@ class TypeParser {
   /// final parsed = TypeParser.parseType(field.type, field);
   /// if (parsed.isNullable) print('Field is nullable');
   /// ```
-  static ParsedType parseType(DartType dartType, Element context) {
+  static ParsedType parseType(DartType dartType, Element2 context) {
     try {
       return _parseTypeInternal(dartType, context);
     } catch (e) {
@@ -61,7 +61,7 @@ class TypeParser {
     }
   }
 
-  static ParsedType _parseTypeInternal(DartType dartType, Element context) {
+  static ParsedType _parseTypeInternal(DartType dartType, Element2 context) {
     final displayString = dartType.getDisplayString();
     final isNullable = dartType.nullabilitySuffix == NullabilitySuffix.question;
 
@@ -87,7 +87,10 @@ class TypeParser {
   }
 
   static ParsedType _parseFutureType(
-      DartType dartType, Element context, bool isNullable) {
+    DartType dartType,
+    Element2 context,
+    bool isNullable,
+  ) {
     if (dartType is! ParameterizedType || dartType.typeArguments.isEmpty) {
       throw TypeParsingException(
         'Future type must have a type argument',
@@ -112,7 +115,10 @@ class TypeParser {
   }
 
   static ParsedType _parseGenericType(
-      ParameterizedType dartType, Element context, bool isNullable) {
+    ParameterizedType dartType,
+    Element2 context,
+    bool isNullable,
+  ) {
     final typeArguments = dartType.typeArguments
         .map((arg) => _parseTypeInternal(arg, context))
         .toList();
@@ -138,7 +144,7 @@ class TypeParser {
   /// final parsed = TypeParser.parseType(field.type, field);
   /// TypeParser.validateInjectableType(parsed, field);
   /// ```
-  static void validateInjectableType(ParsedType parsedType, Element context) {
+  static void validateInjectableType(ParsedType parsedType, Element2 context) {
     // Check for void type
     if (parsedType.coreType == 'void') {
       throw TypeParsingException(

cherrypick_generator/pubspec.yaml

@@ -2,9 +2,9 @@ name: cherrypick_generator
 description: |
   Source code generator for the cherrypick dependency injection system. Processes annotations to generate binding and module code for Dart & Flutter projects.
 
-version: 3.0.0-dev.0
+version: 4.0.0-dev.0
-homepage: https://cherrypick-di.dev/
+homepage: https://cherrypick-di.netlify.app
-documentation: https://cherrypick-di.dev/docs/intro
+documentation: https://cherrypick-di.netlify.app/docs/intro
 repository: https://github.com/pese-git/cherrypick/cherrypick_generator
 issue_tracker: https://github.com/pese-git/cherrypick/issues
 topics:
@@ -15,20 +15,20 @@ topics:
   - inversion-of-control
 
 environment:
-  sdk: ">=3.5.2 <4.0.0"
+  sdk: ">=3.9.0 <4.0.0"
 
 # Add regular dependencies here.
 dependencies:
-  cherrypick_annotations: ^3.0.0-dev.0
+  cherrypick_annotations: ^4.0.0-dev.0
-  analyzer: ^7.0.0
+  analyzer: ">=8.2.9 <10.0.1"
   dart_style: ^3.0.0
-  build: ^2.4.1
+  build: ^3.0.0
-  source_gen: ^2.0.0
+  source_gen: ^4.2.0
   collection: ^1.18.0
 
 dev_dependencies:
-  lints: ^4.0.0
+  lints: ^6.0.0
-  mockito: ^5.4.4
+  mockito: ^5.4.5
   test: ^1.25.8
-  build_test: ^2.1.7
+  build_test: ^3.0.0
-  build_runner: ^2.4.13
+  build_runner: ^2.5.0

cherrypick_generator/test/inject_generator_test.dart

@@ -480,9 +480,10 @@ void notAClass() {}
         );
       });
 
-      test('should generate empty mixin for class without @inject fields',
+      test(
-          () async {
+        'should generate empty mixin for class without @inject fields',
-        const input = '''
+        () async {
+          const input = '''
 import 'package:cherrypick_annotations/cherrypick_annotations.dart';
 
 part 'test_widget.inject.cherrypick.g.dart';
@@ -494,7 +495,7 @@ class TestWidget {
 }
 ''';
 
-        const expectedOutput = '''
+          const expectedOutput = '''
 // dart format width=80
 // GENERATED CODE - DO NOT MODIFY BY HAND
 
@@ -509,8 +510,9 @@ mixin _\$TestWidget {
 }
 ''';
 
-        await _testGeneration(input, expectedOutput);
+          await _testGeneration(input, expectedOutput);
-      });
+        },
+      );
     });
 
     group('Edge Cases', () {
@@ -593,12 +595,8 @@ mixin _\$TestWidget {
 Future<void> _testGeneration(String input, String expectedOutput) async {
   await testBuilder(
     injectBuilder(BuilderOptions.empty),
-    {
+    {'a|lib/test_widget.dart': input},
-      'a|lib/test_widget.dart': input,
+    outputs: {'a|lib/test_widget.inject.cherrypick.g.dart': expectedOutput},
-    },
+    readerWriter: TestReaderWriter(),
-    outputs: {
-      'a|lib/test_widget.inject.cherrypick.g.dart': expectedOutput,
-    },
-    reader: await PackageAssetReader.currentIsolate(),
   );
 }

cherrypick_generator/test/module_generator_test.dart

@@ -590,9 +590,10 @@ void notAClass() {}
         );
       });
 
-      test('should throw error for method without @instance or @provide',
+      test(
-          () async {
+        'should throw error for method without @instance or @provide',
-        const input = '''
+        () async {
+          const input = '''
 import 'package:cherrypick_annotations/cherrypick_annotations.dart';
 import 'package:cherrypick/cherrypick.dart';
 
@@ -604,11 +605,12 @@ abstract class TestModule extends Module {
 }
 ''';
 
-        await expectLater(
+          await expectLater(
-          () => _testGeneration(input, ''),
+            () => _testGeneration(input, ''),
-          throwsA(isA<InvalidGenerationSourceError>()),
+            throwsA(isA<InvalidGenerationSourceError>()),
-        );
+          );
-      });
+        },
+      );
 
       test('should throw error for @params with @instance', () async {
         const input = '''
@@ -637,12 +639,8 @@ abstract class TestModule extends Module {
 Future<void> _testGeneration(String input, String expectedOutput) async {
   await testBuilder(
     moduleBuilder(BuilderOptions.empty),
-    {
+    {'a|lib/test_module.dart': input},
-      'a|lib/test_module.dart': input,
+    outputs: {'a|lib/test_module.module.cherrypick.g.dart': expectedOutput},
-    },
+    readerWriter: TestReaderWriter(),
-    outputs: {
-      'a|lib/test_module.module.cherrypick.g.dart': expectedOutput,
-    },
-    reader: await PackageAssetReader.currentIsolate(),
   );
 }

cherrypick_generator/test/type_parser_test.dart

@@ -1,7 +1,6 @@
+import 'package:analyzer/dart/element/element2.dart';
 import 'package:test/test.dart';
 
-import 'package:analyzer/dart/element/element.dart';
-import 'package:analyzer/source/source.dart';
 import 'package:cherrypick_generator/src/type_parser.dart';
 import 'package:cherrypick_generator/src/exceptions.dart';
 
@@ -42,7 +41,9 @@ void main() {
 
         expect(
           () => TypeParser.validateInjectableType(
-              parsedType, _createMockElement()),
+            parsedType,
+            _createMockElement(),
+          ),
           throwsA(isA<TypeParsingException>()),
         );
       });
@@ -59,7 +60,9 @@ void main() {
 
         expect(
           () => TypeParser.validateInjectableType(
-              parsedType, _createMockElement()),
+            parsedType,
+            _createMockElement(),
+          ),
           throwsA(isA<TypeParsingException>()),
         );
       });
@@ -76,7 +79,9 @@ void main() {
 
         expect(
           () => TypeParser.validateInjectableType(
-              parsedType, _createMockElement()),
+            parsedType,
+            _createMockElement(),
+          ),
           returnsNormally,
         );
       });
@@ -159,19 +164,21 @@ void main() {
       expect(parsedType.resolveMethodName, equals('resolveAsync'));
     });
 
-    test('should return correct resolveMethodName for nullable async types',
+    test(
-        () {
+      'should return correct resolveMethodName for nullable async types',
-      final parsedType = ParsedType(
+      () {
-        displayString: 'Future<String?>',
+        final parsedType = ParsedType(
-        coreType: 'String',
+          displayString: 'Future<String?>',
-        isNullable: true,
+          coreType: 'String',
-        isFuture: true,
+          isNullable: true,
-        isGeneric: false,
+          isFuture: true,
-        typeArguments: [],
+          isGeneric: false,
-      );
+          typeArguments: [],
+        );
 
-      expect(parsedType.resolveMethodName, equals('tryResolveAsync'));
+        expect(parsedType.resolveMethodName, equals('tryResolveAsync'));
-    });
+      },
+    );
 
     test('should implement equality correctly', () {
       final parsedType1 = ParsedType(
@@ -216,19 +223,19 @@ void main() {
 }
 
 // Mock element for testing
-Element _createMockElement() {
+Element2 _createMockElement() {
   return _MockElement();
 }
 
-class _MockElement implements Element {
+class _MockElement implements Element2 {
   @override
   String get displayName => 'MockElement';
 
-  @override
+  //@override
-  String get name => 'MockElement';
+  //String get name => 'MockElement';
-
+  //
-  @override
+  //@override
-  Source? get source => null;
+  //Source? get source => null;
 
   @override
   noSuchMethod(Invocation invocation) => super.noSuchMethod(invocation);

doc/news/cherrypick-3.x_en.md

@@ -0,0 +1,178 @@
+# Release - CherryPick 3.x
+
+> **CherryPick** — a lightweight and modular DI framework for Dart and Flutter that solves dependency injection through strong typing, code generation, and dependency control.
+
+Version **3.x** was recently released with significant improvements.
+
+## Main Changes in 3.x
+
+* **O(1) dependency resolution** — thanks to Map indexing of bindings, performance does not depend on the size of the scope in the DI graph. This provides noticeable speedup in large projects.
+* **Protection against circular dependencies** — checking works both within a single scope and across the entire hierarchy. When a cycle is detected, an informative exception with the dependency chain is thrown.
+* **Integration with Talker** — all DI events (registration, creation, deletion, errors) are logged and can be displayed in the console or UI.
+* **Automatic resource cleanup** — objects implementing `Disposable` are properly released when the scope is closed.
+* **Stabilized declarative approach support** — annotations and code generation now work more reliably and are more convenient for use in projects.
+
+## Resource Cleanup Example
+
+```dart
+class MyServiceWithSocket implements Disposable {
+  @override
+  Future<void> dispose() async {
+    await socket.close();
+    print('Socket closed!');
+  }
+}
+
+class AppModule extends Module {
+  @override
+  void builder(Scope currentScope) {
+    // singleton Api
+    bind<MyServiceWithSocket>()
+      .toProvide(() => MyServiceWithSocket())
+      .singleton();
+  }
+}
+
+scope.installModules([AppModule()]);
+
+await CherryPick.closeRootScope(); // will wait for async dispose to complete
+```
+
+## Circular Dependency Checking
+
+One of the new features in CherryPick 3.x is built-in cycle protection.
+This helps catch situations early where services start depending on each other recursively.
+
+### How to Enable Checking
+
+For checking within a single scope:
+
+```dart
+final scope = CherryPick.openRootScope();
+scope.enableCycleDetection();
+```
+
+For global checking across the entire hierarchy:
+
+```dart
+CherryPick.enableGlobalCycleDetection();
+CherryPick.enableGlobalCrossScopeCycleDetection();
+final rootScope = CherryPick.openRootScope();
+```
+
+### How a Cycle Can Occur
+
+Suppose we have two services that depend on each other:
+
+```dart
+class UserService {
+  final OrderService orderService;
+  UserService(this.orderService);
+}
+
+class OrderService {
+  final UserService userService;
+  OrderService(this.userService);
+}
+```
+
+If we register them in the same scope:
+
+```dart
+class AppModule extends Module {
+  @override
+  void builder(Scope currentScope) {
+    bind<UserService>().toProvide(() => UserService(scope.resolve()));
+    bind<OrderService>().toProvide(() => OrderService(scope.resolve()));
+  }
+}
+
+final scope = CherryPick.openRootScope()
+  ..enableCycleDetection()
+  ..installModules([AppModule()]);
+
+scope.resolve<UserService>();
+```
+
+Then when trying to resolve the dependency, an exception will be thrown:
+
+```bash
+❌ Circular dependency detected for UserService
+Dependency chain: UserService -> OrderService -> UserService
+```
+
+This way, the error is detected immediately, not "somewhere in runtime".
+
+## Integration with Talker
+
+CherryPick 3.x allows logging all DI events through [Talker](https://pub.dev/packages/talker): registration, object creation, deletion, and errors. This is convenient for debugging and diagnosing the dependency graph.
+
+Connection example:
+
+```dart
+final talker = Talker();
+final observer = TalkerCherryPickObserver(talker);
+CherryPick.setGlobalObserver(observer);
+```
+
+After this, DI events will be displayed in the console or UI:
+
+```bash
+┌───────────────────────────────────────────────────────────────
+│ [info]    9:41:33  | [scope opened][CherryPick] scope_1757054493089_7072
+└───────────────────────────────────────────────────────────────
+┌───────────────────────────────────────────────────────────────
+│ [verbose] 9:41:33  | [diagnostic][CherryPick] Scope created: scope_1757054493089_7072 {type: Scope, name: scope_1757054493089_7072, description: scope created}
+└───────────────────────────────────────────────────────────────
+```
+
+In the log, you can see when scopes are created, which objects are registered and deleted, and catch errors and cycles in real time.
+
+
+## Declarative Approach with Annotations
+
+In addition to fully programmatic module descriptions, CherryPick supports **declarative DI style through annotations**.  
+This allows minimizing manual code and automatically generating modules and mixins for automatic dependency injection.
+
+Example of a declarative module:
+
+```dart
+@module()
+abstract class AppModule extends Module {
+  @provide()
+  @singleton()
+  Api api() => Api();
+
+  @provide()
+  Repo repo(Api api) => Repo(api);
+}
+````
+
+After code generation, you can automatically inject dependencies into widgets or services:
+
+```dart
+@injectable()
+class MyScreen extends StatelessWidget with _$MyScreen {
+  @inject()
+  late final Repo repo;
+
+  MyScreen() {
+    _inject(this);
+  }
+}
+```
+
+This way you can choose an approach in development: **programmatic (imperative) with explicit dependency registration** or **declarative through annotations**.
+
+
+## Who Might Find CherryPick Useful?
+
+* Projects where it's important to guarantee **no cycles in the dependency graph**;
+* Teams that want to **minimize manual DI code** and use a declarative style with annotations;
+* Applications that require **automatic resource cleanup** (sockets, controllers, streams).
+
+## Useful Links
+
+* 📦 Package: [pub.dev/packages/cherrypick](https://pub.dev/packages/cherrypick)
+* 💻 Code: [github.com/pese-git/cherrypick](https://github.com/pese-git/cherrypick)
+* 📖 Documentation: [cherrypick-di.netlify.app](https://cherrypick-di.netlify.app/)

doc/news/cherrypick-3.x_ru.md

@@ -0,0 +1,180 @@
+# Release - CherryPick 3.x
+
+> **CherryPick** — лёгкий и модульный DI-фреймворк для Dart и Flutter, который решает задачу через строгую типизацию, кодогенерацию и контроль за зависимостями.
+
+Недавно вышла версия **3.x**, где появились заметные улучшения.
+
+
+## Основные изменения в 3.x
+
+* **O(1) разрешение зависимостей** — благодаря Map-индексации биндингов производительность не зависит от размера скоупа в DI графе. На больших проектах это даёт ощутимое ускорение.
+* **Защита от циклических зависимостей** — проверка работает как внутри одного scope, так и во всей иерархии. При обнаружении цикла выбрасывается информативное исключение с цепочкой зависимостей.
+* **Интеграция с Talker** — все события DI (регистрация, создание, удаление, ошибки) логируются и могут выводиться в консоль или UI.
+* **Автоматическая очистка ресурсов** — объекты, реализующие `Disposable`, корректно освобождаются при закрытии scope.
+* **Стабилизирована поддержка декларативного подхода** — аннотации и генерация кода теперь работают надёжнее и удобнее для использования в проектах.
+
+
+## Пример с очисткой ресурсов
+
+```dart
+class MyServiceWithSocket implements Disposable {
+  @override
+  Future<void> dispose() async {
+    await socket.close();
+    print('Socket закрыт!');
+  }
+}
+
+class AppModule extends Module {
+  @override
+  void builder(Scope currentScope) {
+    // singleton Api
+    bind<MyServiceWithSocket>()
+      .toProvide(() => MyServiceWithSocket())
+      .singleton();
+  }
+}
+
+scope.installModules([AppModule()]);
+
+await CherryPick.closeRootScope(); // дождётся завершения async dispose
+```
+
+## Проверка циклических зависимостей
+
+Одна из новинок CherryPick 3.x — встроенная защита от циклов.
+Это помогает на раннем этапе отлавливать ситуации, когда сервисы начинают зависеть друг от друга рекурсивно.
+
+### Как включить проверку
+
+Для проверки внутри одного scope:
+
+```dart
+final scope = CherryPick.openRootScope();
+scope.enableCycleDetection();
+```
+
+Для глобальной проверки во всей иерархии:
+
+```dart
+CherryPick.enableGlobalCycleDetection();
+CherryPick.enableGlobalCrossScopeCycleDetection();
+final rootScope = CherryPick.openRootScope();
+```
+
+### Как может возникнуть цикл
+
+Предположим, у нас есть два сервиса, которые зависят друг от друга:
+
+```dart
+class UserService {
+  final OrderService orderService;
+  UserService(this.orderService);
+}
+
+class OrderService {
+  final UserService userService;
+  OrderService(this.userService);
+}
+```
+
+Если зарегистрировать их в одном scope:
+
+```dart
+class AppModule extends Module {
+  @override
+  void builder(Scope currentScope) {
+    bind<UserService>().toProvide(() => UserService(scope.resolve());
+    bind<OrderService>().toProvide(() => OrderService(scope.resolve()));
+  }
+}
+
+final scope = CherryPick.openRootScope()
+  ..enableCycleDetection()
+  ..installModules([AppModule()]);
+
+scope.resolve<UserService>();
+```
+
+То при попытке разрешить зависимость будет выброшено исключение:
+
+```bash
+❌ Circular dependency detected for UserService
+Dependency chain: UserService -> OrderService -> UserService
+```
+
+Таким образом, ошибка выявляется сразу, а не «где-то в runtime».
+
+## Интеграция с Talker
+
+CherryPick 3.x позволяет логировать все события DI через [Talker](https://pub.dev/packages/talker): регистрацию, создание объектов, удаление и ошибки. Это удобно для отладки и диагностики графа зависимостей.
+
+Пример подключения:
+
+```dart
+final talker = Talker();
+final observer = TalkerCherryPickObserver(talker);
+CherryPick.setGlobalObserver(observer);
+```
+
+После этого в консоли или UI будут отображаться события DI:
+
+```bash
+┌───────────────────────────────────────────────────────────────
+│ [info]    9:41:33  | [scope opened][CherryPick] scope_1757054493089_7072
+└───────────────────────────────────────────────────────────────
+┌───────────────────────────────────────────────────────────────
+│ [verbose] 9:41:33  | [diagnostic][CherryPick] Scope created: scope_1757054493089_7072 {type: Scope, name: scope_1757054493089_7072, description: scope created}
+└───────────────────────────────────────────────────────────────
+```
+
+В логе можно увидеть, когда scope создаётся, какие объекты регистрируются и удаляются, а также отлавливать ошибки и циклы в реальном времени.
+
+
+## Декларативный подход с аннотациями
+
+Помимо полностью программного описания модулей, CherryPick поддерживает **декларативный стиль DI через аннотации**.  
+Это позволяет минимизировать ручной код и автоматически генерировать модули и mixin для автоподстановки зависимостей.
+
+Пример декларативного модуля:
+
+```dart
+@module()
+abstract class AppModule extends Module {
+  @provide()
+  @singleton()
+  Api api() => Api();
+
+  @provide()
+  Repo repo(Api api) => Repo(api);
+}
+````
+
+После генерации кода можно автоматически подтягивать зависимости в виджеты или сервисы:
+
+```dart
+@injectable()
+class MyScreen extends StatelessWidget with _$MyScreen {
+  @inject()
+  late final Repo repo;
+
+  MyScreen() {
+    _inject(this);
+  }
+}
+```
+
+Таким образом можно выбрать подход в разработке: **программный (императивный) с явной регистрацией зависимостей** или **декларативный через аннотации**.
+
+
+## Кому может быть полезен CherryPick?
+
+* проектам, где важно гарантировать **отсутствие циклов в графе зависимостей**;
+* командам, которые хотят **минимизировать ручной DI-код** и использовать декларативный стиль с аннотациями;
+* приложениям, где требуется **автоматическое освобождение ресурсов** (сокеты, контроллеры, потоки).
+
+## Полезные ссылки
+
+* 📦 Пакет: [pub.dev/packages/cherrypick](https://pub.dev/packages/cherrypick)
+* 💻 Код: [github.com/pese-git/cherrypick](https://github.com/pese-git/cherrypick)
+* 📖 Документация: [cherrypick-di.netlify.app](https://cherrypick-di.netlify.app/)

doc/presentation_ru.md

@@ -0,0 +1,244 @@
+---
+marp: true
+---
+
+<!--
+#backgroundImage: url('./doc/assets/image.png')
+backgroundSize: cover
+-->
+
+# CherryPick 3.x  
+### Быстро. Безопасно. Просто.
+
+Современный DI-framework для Dart и Flutter  
+Автор: Сергей Пеньковский
+
+---
+<!--
+backgroundImage: none
+-->
+
+## Что такое CherryPick?
+
+- Лёгкий и модульный framework для внедрения зависимостей (DI)
+- Фокус: производительность, безопасность и лаконичный код
+- Применяется во frontend, backend, CLI
+
+---
+
+## Эволюция: что нового в 3.x?
+
+- Оптимизация скорости разрешения зависимостей
+- Интеграция с Talker для наглядного логирования DI-событий
+- Защита от циклических зависимостей на уровне ядра
+- Полностью декларативное описание DI через аннотации и генерацию кода
+- Автоматическая очистка ресурсов
+
+---
+
+## Быстро
+
+* Мгновенное разрешение зависимостей
+
+---
+
+### Мгновенное разрешение зависимостей
+
+- Операция resolve<T> теперь выполняется за O(1)
+- Используется Map-индексация всех биндингов в каждом скоупе (в среднем ускорение в 10x+ на крупных графах)
+- Производительность не зависит от размера приложения
+
+---
+
+## Безопасно
+
+* Циклические зависимости больше не страшны
+* Интеграция с Talker и расширенное логирование
+
+---
+
+### Циклические зависимости больше не страшны
+
+- CherryPick 3.x автоматически выявляет циклы при разрешении зависимостей.
+- Возможна проверка как внутри отдельного scope, так и во всём DI-графе (глобально).
+
+---
+
+#### Как включить проверку циклов
+
+
+- Для защиты только внутри одного scope:
+
+```dart
+// 1. Для текущего scope (локальная проверка)
+final scope = CherryPick.openRootScope();
+scope.enableCycleDetection();
+```
+
+- Для защиты всей иерархии скоупов:
+
+```dart
+// 2. Для всей иерархии скоупов (глобальная проверка)
+CherryPick.enableGlobalCycleDetection();
+CherryPick.enableGlobalCrossScopeCycleDetection();
+final rootScope = CherryPick.openRootScope();
+```
+
+---
+
+#### Пример обработки ошибки
+
+При обнаружении цикла будет выброшено исключение с подробной трассировкой:
+
+```dart
+try {
+  scope.resolve<A>();
+} on CircularDependencyException catch(e) {
+  print(e.dependencyChain);
+}
+```
+
+```bash
+=== Circular Dependency Detection Example ===
+
+1. Attempt to create a scope with circular dependencies:
+❌ Circular dependency detected: CircularDependencyException: Circular dependency detected for UserService
+Dependency chain: UserService -> OrderService -> UserService
+```
+
+---
+
+### Интеграция с Talker и расширенное логирование
+
+- Всё, что происходит в DI: регистрация, создание, удаление, ошибки ― теперь логируется!
+- Достаточно подключить observer:
+
+```dart
+  final talker = Talker();
+  final talkerLogger = TalkerCherryPickObserver(talker);
+  CherryPick.setGlobalObserver(talkerLogger);
+```
+- Логи сразу видны в консоли, UI 
+
+```bash
+┌──────────────────────────────────────────────────────────────────────────────────────────────────────────────
+│ [info] | 9:41:33 89ms | [scope opened][CherryPick] scope_1757054493089_7072
+└──────────────────────────────────────────────────────────────────────────────────────────────────────────────
+┌──────────────────────────────────────────────────────────────────────────────────────────────────────────────
+│ [verbose] | 9:41:33 90ms | [diagnostic][CherryPick] Scope created: scope_1757054493089_7072 {type: Scope, name: scope_1757054493089_7072, description: scope created}
+└──────────────────────────────────────────────────────────────────────────────────────────────────────────────
+```
+
+---
+
+## Просто
+
+* Декларативный DI
+* Автоматическая очистка ресурсов
+
+---
+
+### Декларативный DI: аннотации и генерация кода
+
+- Описывайте зависимости с помощью аннотаций
+- Автоматически генерируется модуль DI и mixin для автоподстановки зависимостей
+
+```dart
+@module()
+abstract class AppModule extends Module {
+  @provide()
+  @singleton()
+  Api api() => Api();
+  @provide()
+  Repo repo(Api api) => Repo(api);
+}
+```
+
+Регистрация модуля
+
+```dart
+final scope = openRootScope()
+  ..installModules([$AppModule()]);
+```
+
+---
+
+### Field injection: минимум кода — максимум удобства
+
+```dart
+@injectable()
+class MyScreen  extends StatelessWidget with _$MyScreen {
+  @inject()
+  late final Repo repo;
+
+  MyScreen() {
+    _inject(this);
+  }
+}
+```
+
+- После генерации mixin и вызова `screen._inject()` — зависимости готовы
+- Сильная типизация, никаких ручных вызовов resolve
+
+---
+
+## Автоматическая очистка ресурсов
+
+Автоматическая очистка ресурсов (контроллеры, потоки, сокеты, файлы и др.).
+
+Если вы регистрируете объект, реализующий Disposable, через DI-контейнер, CherryPick вызовет его метод dispose() при закрытии скоупа.
+
+```dart
+class MyServiceWithSocket implements Disposable {
+  @override
+  Future<void> dispose() async {
+    await socket.close();
+    print('Socket закрыт!');
+  }
+}
+
+scope.installModules([
+  Module((bind) => bind<MyServiceWithSocket>().toProvide(() => MyServiceWithSocket()).singleton()),
+]);
+
+await CherryPick.closeRootScope(); // дождётся завершения async очистки
+```
+
+---
+
+## Почему это удобно?  
+### Сравнение с ручным DI
+
+|| Аннотации  | Ручной DI   |
+|:---|:-----------|:------------|
+|Гибко|✅|✅|
+|Кратко|✅|❌|
+|Безопасно|✅|❌ (легко ошибиться)|
+
+---
+
+## CherryPick 3.x: ваш DI-фреймворк
+
+- Быстрое разрешение зависимостей
+- Гарантия безопасности и тестируемости
+- Интеграция с логированием
+- Максимально простой и декларативный код
+
+---
+
+<!--
+#backgroundImage: url('./doc/assets/image.png')
+backgroundSize: cover
+-->
+
+## Спасибо за внимание
+
+---
+
+## Вопросы?
+
+- Try CherryPick - [https://pub.dev/packages/cherrypick](https://pub.dev/packages/cherrypick)
+- Contributing — [https://github.com/pese-git/cherrypick](https://github.com/pese-git/cherrypick)
+- Документация и примеры — [https://cherrypick-di.netlify.app](https://cherrypick-di.netlify.app/)
+- Готов помочь — пишите, пробуйте, внедряйте!
+

examples/client_app/lib/main.dart

@@ -9,11 +9,7 @@ void main() {
     // Создаем модуль, который будет предоставлять UseCase
   ]);
 
-  runApp(
+  runApp(const CherryPickProvider(child: MyApp()));
-    const CherryPickProvider(
-      child: MyApp(),
-    ),
-  );
 }
 
 class MyApp extends StatelessWidget {
@@ -21,10 +17,6 @@ class MyApp extends StatelessWidget {
 
   @override
   Widget build(BuildContext context) {
-    return CherryPickProvider(
+    return CherryPickProvider(child: MaterialApp(home: MyHomePage()));
-      child: MaterialApp(
-        home: MyHomePage(),
-      ),
-    );
   }
 }

examples/client_app/lib/my_home_page.dart

@@ -11,12 +11,8 @@ class MyHomePage extends StatelessWidget {
   Widget build(BuildContext context) {
     //_inject(context); // Make sure this function is called in context
     return Scaffold(
-      appBar: AppBar(
+      appBar: AppBar(title: const Text('Example App')),
-        title: const Text('Example App'),
+      body: Center(child: Text(useCase.fetchData())),
-      ),
-      body: Center(
-        child: Text(useCase.fetchData()),
-      ),
     );
   }
 }

examples/client_app/pubspec.lock

@@ -5,18 +5,18 @@ packages:
     dependency: transitive
     description:
       name: _fe_analyzer_shared
-      sha256: e55636ed79578b9abca5fecf9437947798f5ef7456308b5cb85720b793eac92f
+      sha256: c209688d9f5a5f26b2fb47a188131a6fb9e876ae9e47af3737c0b4f58a93470d
       url: "https://pub.dev"
     source: hosted
-    version: "82.0.0"
+    version: "91.0.0"
   analyzer:
     dependency: transitive
     description:
       name: analyzer
-      sha256: "904ae5bb474d32c38fb9482e2d925d5454cda04ddd0e55d2e6826bc72f6ba8c0"
+      sha256: f51c8499b35f9b26820cfe914828a6a98a94efd5cc78b37bb7d03debae3a1d08
       url: "https://pub.dev"
     source: hosted
-    version: "7.4.5"
+    version: "8.4.1"
   args:
     dependency: transitive
     description:
@@ -29,10 +29,10 @@ packages:
     dependency: transitive
     description:
       name: async
-      sha256: d2872f9c19731c2e5f10444b14686eb7cc85c76274bd6c16e1816bff9a3bab63
+      sha256: "758e6d74e971c3e5aceb4110bfd6698efc7f501675bcfe0c775459a8140750eb"
       url: "https://pub.dev"
     source: hosted
-    version: "2.12.0"
+    version: "2.13.0"
   boolean_selector:
     dependency: transitive
     description:
@@ -45,50 +45,50 @@ packages:
     dependency: transitive
     description:
       name: build
-      sha256: cef23f1eda9b57566c81e2133d196f8e3df48f244b317368d65c5943d91148f0
+      sha256: ce76b1d48875e3233fde17717c23d1f60a91cc631597e49a400c89b475395b1d
       url: "https://pub.dev"
     source: hosted
-    version: "2.4.2"
+    version: "3.1.0"
   build_config:
     dependency: transitive
     description:
       name: build_config
-      sha256: bf80fcfb46a29945b423bd9aad884590fb1dc69b330a4d4700cac476af1708d1
+      sha256: "4f64382b97504dc2fcdf487d5aae33418e08b4703fc21249e4db6d804a4d0187"
       url: "https://pub.dev"
     source: hosted
-    version: "1.1.1"
+    version: "1.2.0"
   build_daemon:
     dependency: transitive
     description:
       name: build_daemon
-      sha256: "79b2aef6ac2ed00046867ed354c88778c9c0f029df8a20fe10b5436826721ef9"
+      sha256: bf05f6e12cfea92d3c09308d7bcdab1906cd8a179b023269eed00c071004b957
       url: "https://pub.dev"
     source: hosted
-    version: "4.0.2"
+    version: "4.1.1"
   build_resolvers:
     dependency: transitive
     description:
       name: build_resolvers
-      sha256: b9e4fda21d846e192628e7a4f6deda6888c36b5b69ba02ff291a01fd529140f0
+      sha256: d1d57f7807debd7349b4726a19fd32ec8bc177c71ad0febf91a20f84cd2d4b46
       url: "https://pub.dev"
     source: hosted
-    version: "2.4.4"
+    version: "3.0.3"
   build_runner:
     dependency: "direct dev"
     description:
       name: build_runner
-      sha256: "058fe9dce1de7d69c4b84fada934df3e0153dd000758c4d65964d0166779aa99"
+      sha256: b24597fceb695969d47025c958f3837f9f0122e237c6a22cb082a5ac66c3ca30
       url: "https://pub.dev"
     source: hosted
-    version: "2.4.15"
+    version: "2.7.1"
   build_runner_core:
     dependency: transitive
     description:
       name: build_runner_core
-      sha256: "22e3aa1c80e0ada3722fe5b63fd43d9c8990759d0a2cf489c8c5d7b2bdebc021"
+      sha256: "066dda7f73d8eb48ba630a55acb50c4a84a2e6b453b1cb4567f581729e794f7b"
       url: "https://pub.dev"
     source: hosted
-    version: "8.0.0"
+    version: "9.3.1"
   built_collection:
     dependency: transitive
     description:
@@ -101,10 +101,10 @@ packages:
     dependency: transitive
     description:
       name: built_value
-      sha256: ea90e81dc4a25a043d9bee692d20ed6d1c4a1662a28c03a96417446c093ed6b4
+      sha256: "7931c90b84bc573fef103548e354258ae4c9d28d140e41961df6843c5d60d4d8"
       url: "https://pub.dev"
     source: hosted
-    version: "8.9.5"
+    version: "8.12.3"
   characters:
     dependency: transitive
     description:
@@ -117,38 +117,38 @@ packages:
     dependency: transitive
     description:
       name: checked_yaml
-      sha256: feb6bed21949061731a7a75fc5d2aa727cf160b91af9a3e464c5e3a32e28b5ff
+      sha256: "959525d3162f249993882720d52b7e0c833978df229be20702b33d48d91de70f"
       url: "https://pub.dev"
     source: hosted
-    version: "2.0.3"
+    version: "2.0.4"
   cherrypick:
     dependency: "direct main"
     description:
       path: "../../cherrypick"
       relative: true
     source: path
-    version: "3.0.0-dev.12"
+    version: "3.0.2"
   cherrypick_annotations:
     dependency: "direct main"
     description:
       path: "../../cherrypick_annotations"
       relative: true
     source: path
-    version: "1.1.2-dev.2"
+    version: "3.0.2"
   cherrypick_flutter:
     dependency: "direct main"
     description:
       path: "../../cherrypick_flutter"
       relative: true
     source: path
-    version: "1.1.3-dev.12"
+    version: "3.0.2"
   cherrypick_generator:
     dependency: "direct dev"
     description:
       path: "../../cherrypick_generator"
       relative: true
     source: path
-    version: "2.0.0-dev.2"
+    version: "3.0.2"
   clock:
     dependency: transitive
     description:
@@ -161,10 +161,10 @@ packages:
     dependency: transitive
     description:
       name: code_builder
-      sha256: "0ec10bf4a89e4c613960bf1e8b42c64127021740fb21640c29c909826a5eea3e"
+      sha256: "6a6cab2ba4680d6423f34a9b972a4c9a94ebe1b62ecec4e1a1f2cba91fd1319d"
       url: "https://pub.dev"
     source: hosted
-    version: "4.10.1"
+    version: "4.11.1"
   collection:
     dependency: transitive
     description:
@@ -185,10 +185,10 @@ packages:
     dependency: transitive
     description:
       name: crypto
-      sha256: "1e445881f28f22d6140f181e07737b22f1e099a5e1ff94b0af2f9e4a463f4855"
+      sha256: c8ea0233063ba03258fbcf2ca4d6dadfefe14f02fab57702265467a19f27fadf
       url: "https://pub.dev"
     source: hosted
-    version: "3.0.6"
+    version: "3.0.7"
   cupertino_icons:
     dependency: "direct main"
     description:
@@ -201,18 +201,18 @@ packages:
     dependency: transitive
     description:
       name: dart_style
-      sha256: "27eb0ae77836989a3bc541ce55595e8ceee0992807f14511552a898ddd0d88ac"
+      sha256: a9c30492da18ff84efe2422ba2d319a89942d93e58eb0b73d32abe822ef54b7b
       url: "https://pub.dev"
     source: hosted
-    version: "3.0.1"
+    version: "3.1.3"
   fake_async:
     dependency: transitive
     description:
       name: fake_async
-      sha256: "6a95e56b2449df2273fd8c45a662d6947ce1ebb7aafe80e550a3f68297f3cacc"
+      sha256: "5368f224a74523e8d2e7399ea1638b37aecfca824a3cc4dfdf77bf1fa905ac44"
       url: "https://pub.dev"
     source: hosted
-    version: "1.3.2"
+    version: "1.3.3"
   file:
     dependency: transitive
     description:
@@ -238,10 +238,10 @@ packages:
     dependency: "direct dev"
     description:
       name: flutter_lints
-      sha256: "5398f14efa795ffb7a33e9b6a08798b26a180edac4ad7db3f231e40f82ce11e1"
+      sha256: "3105dc8492f6183fb076ccf1f351ac3d60564bff92e20bfc4af9cc1651f4e7e1"
       url: "https://pub.dev"
     source: hosted
-    version: "5.0.0"
+    version: "6.0.0"
   flutter_test:
     dependency: "direct dev"
     description: flutter
@@ -271,14 +271,6 @@ packages:
       url: "https://pub.dev"
     source: hosted
     version: "2.3.2"
-  http:
-    dependency: transitive
-    description:
-      name: http
-      sha256: "2c11f3f94c687ee9bad77c171151672986360b2b001d109814ee7140b2cf261b"
-      url: "https://pub.dev"
-    source: hosted
-    version: "1.4.0"
   http_multi_server:
     dependency: transitive
     description:
@@ -291,10 +283,10 @@ packages:
     dependency: transitive
     description:
       name: http_parser
-      sha256: "2aa08ce0341cc9b354a498388e30986515406668dbcc4f7c950c3e715496693b"
+      sha256: "178d74305e7866013777bab2c3d8726205dc5a4dd935297175b19a23a2e66571"
       url: "https://pub.dev"
     source: hosted
-    version: "4.0.2"
+    version: "4.1.2"
   io:
     dependency: transitive
     description:
@@ -303,54 +295,46 @@ packages:
       url: "https://pub.dev"
     source: hosted
     version: "1.0.5"
-  js:
-    dependency: transitive
-    description:
-      name: js
-      sha256: c1b2e9b5ea78c45e1a0788d29606ba27dc5f71f019f32ca5140f61ef071838cf
-      url: "https://pub.dev"
-    source: hosted
-    version: "0.7.1"
   json_annotation:
     dependency: transitive
     description:
       name: json_annotation
-      sha256: "1ce844379ca14835a50d2f019a3099f419082cfdd231cd86a142af94dd5c6bb1"
+      sha256: "805fa86df56383000f640384b282ce0cb8431f1a7a2396de92fb66186d8c57df"
       url: "https://pub.dev"
     source: hosted
-    version: "4.9.0"
+    version: "4.10.0"
   leak_tracker:
     dependency: transitive
     description:
       name: leak_tracker
-      sha256: c35baad643ba394b40aac41080300150a4f08fd0fd6a10378f8f7c6bc161acec
+      sha256: "33e2e26bdd85a0112ec15400c8cbffea70d0f9c3407491f672a2fad47915e2de"
       url: "https://pub.dev"
     source: hosted
-    version: "10.0.8"
+    version: "11.0.2"
   leak_tracker_flutter_testing:
     dependency: transitive
     description:
       name: leak_tracker_flutter_testing
-      sha256: f8b613e7e6a13ec79cfdc0e97638fddb3ab848452eff057653abd3edba760573
+      sha256: "1dbc140bb5a23c75ea9c4811222756104fbcd1a27173f0c34ca01e16bea473c1"
       url: "https://pub.dev"
     source: hosted
-    version: "3.0.9"
+    version: "3.0.10"
   leak_tracker_testing:
     dependency: transitive
     description:
       name: leak_tracker_testing
-      sha256: "6ba465d5d76e67ddf503e1161d1f4a6bc42306f9d66ca1e8f079a47290fb06d3"
+      sha256: "8d5a2d49f4a66b49744b23b018848400d23e54caf9463f4eb20df3eb8acb2eb1"
       url: "https://pub.dev"
     source: hosted
-    version: "3.0.1"
+    version: "3.0.2"
   lints:
     dependency: transitive
     description:
       name: lints
-      sha256: "3315600f3fb3b135be672bf4a178c55f274bebe368325ae18462c89ac1e3b413"
+      sha256: a5e2b223cb7c9c8efdc663ef484fdd95bb243bff242ef5b13e26883547fce9a0
       url: "https://pub.dev"
     source: hosted
-    version: "5.0.0"
+    version: "6.0.0"
   logging:
     dependency: transitive
     description:
@@ -379,10 +363,10 @@ packages:
     dependency: transitive
     description:
       name: meta
-      sha256: e3641ec5d63ebf0d9b41bd43201a66e3fc79a65db5f61fc181f04cd27aab950c
+      sha256: "23f08335362185a5ea2ad3a4e597f1375e78bce8a040df5c600c8d3552ef2394"
       url: "https://pub.dev"
     source: hosted
-    version: "1.16.0"
+    version: "1.17.0"
   mime:
     dependency: transitive
     description:
@@ -411,10 +395,10 @@ packages:
     dependency: transitive
     description:
       name: pool
-      sha256: "20fe868b6314b322ea036ba325e6fc0711a22948856475e2c2b6306e8ab39c2a"
+      sha256: "978783255c543aa3586a1b3c21f6e9d720eb315376a915872c61ef8b5c20177d"
       url: "https://pub.dev"
     source: hosted
-    version: "1.5.1"
+    version: "1.5.2"
   pub_semver:
     dependency: transitive
     description:
@@ -427,26 +411,26 @@ packages:
     dependency: transitive
     description:
       name: pubspec_parse
-      sha256: "81876843eb50dc2e1e5b151792c9a985c5ed2536914115ed04e9c8528f6647b0"
+      sha256: "0560ba233314abbed0a48a2956f7f022cce7c3e1e73df540277da7544cad4082"
       url: "https://pub.dev"
     source: hosted
-    version: "1.4.0"
+    version: "1.5.0"
   shelf:
     dependency: transitive
     description:
       name: shelf
-      sha256: ad29c505aee705f41a4d8963641f91ac4cee3c8fad5947e033390a7bd8180fa4
+      sha256: e7dd780a7ffb623c57850b33f43309312fc863fb6aa3d276a754bb299839ef12
       url: "https://pub.dev"
     source: hosted
-    version: "1.4.1"
+    version: "1.4.2"
   shelf_web_socket:
     dependency: transitive
     description:
       name: shelf_web_socket
-      sha256: cc36c297b52866d203dbf9332263c94becc2fe0ceaa9681d07b6ef9807023b67
+      sha256: "3632775c8e90d6c9712f883e633716432a27758216dfb61bd86a8321c0580925"
       url: "https://pub.dev"
     source: hosted
-    version: "2.0.1"
+    version: "3.0.0"
   sky_engine:
     dependency: transitive
     description: flutter
@@ -456,10 +440,10 @@ packages:
     dependency: transitive
     description:
       name: source_gen
-      sha256: "35c8150ece9e8c8d263337a265153c3329667640850b9304861faea59fc98f6b"
+      sha256: "1d562a3c1f713904ebbed50d2760217fd8a51ca170ac4b05b0db490699dbac17"
       url: "https://pub.dev"
     source: hosted
-    version: "2.0.0"
+    version: "4.2.0"
   source_span:
     dependency: transitive
     description:
@@ -512,10 +496,10 @@ packages:
     dependency: transitive
     description:
       name: test_api
-      sha256: fb31f383e2ee25fbbfe06b40fe21e1e458d14080e3c67e7ba0acfde4df4e0bbd
+      sha256: ab2726c1a94d3176a45960b6234466ec367179b87dd74f1611adb1f3b5fb9d55
       url: "https://pub.dev"
     source: hosted
-    version: "0.7.4"
+    version: "0.7.7"
   timing:
     dependency: transitive
     description:
@@ -536,26 +520,26 @@ packages:
     dependency: transitive
     description:
       name: vector_math
-      sha256: "80b3257d1492ce4d091729e3a67a60407d227c27241d6927be0130c98e741803"
+      sha256: d530bd74fea330e6e364cda7a85019c434070188383e1cd8d9777ee586914c5b
       url: "https://pub.dev"
     source: hosted
-    version: "2.1.4"
+    version: "2.2.0"
   vm_service:
     dependency: transitive
     description:
       name: vm_service
-      sha256: "0968250880a6c5fe7edc067ed0a13d4bae1577fe2771dcf3010d52c4a9d3ca14"
+      sha256: "45caa6c5917fa127b5dbcfbd1fa60b14e583afdc08bfc96dda38886ca252eb60"
       url: "https://pub.dev"
     source: hosted
-    version: "14.3.1"
+    version: "15.0.2"
   watcher:
     dependency: transitive
     description:
       name: watcher
-      sha256: "69da27e49efa56a15f8afe8f4438c4ec02eff0a117df1b22ea4aad194fe1c104"
+      sha256: "1398c9f081a753f9226febe8900fce8f7d0a67163334e1c94a2438339d79d635"
       url: "https://pub.dev"
     source: hosted
-    version: "1.1.1"
+    version: "1.2.1"
   web:
     dependency: transitive
     description:
@@ -589,5 +573,5 @@ packages:
     source: hosted
     version: "3.1.3"
 sdks:
-  dart: ">=3.7.0-0 <4.0.0"
+  dart: ">=3.9.0 <4.0.0"
   flutter: ">=3.18.0-18.0.pre.54"

examples/client_app/pubspec.yaml

@@ -5,7 +5,7 @@ publish_to: 'none'
 version: 1.0.0+1
 
 environment:
-  sdk: ">=3.5.2 <4.0.0"
+  sdk: ">=3.9.0 <4.0.0"
 
 
 dependencies:
@@ -25,11 +25,11 @@ dev_dependencies:
   flutter_test:
     sdk: flutter
 
-  flutter_lints: ^5.0.0
+  flutter_lints: ^6.0.0
 
   cherrypick_generator:
     path: ../../cherrypick_generator
-  build_runner: ^2.4.15
+  build_runner: ^2.5.0
 
 # For information on the generic Dart part of this file, see the
 # following page: https://dart.dev/tools/pub/pubspec

examples/postly/lib/data/model/post_model.dart

@@ -4,7 +4,7 @@ part 'post_model.freezed.dart';
 part 'post_model.g.dart';
 
 @freezed
-class PostModel with _$PostModel {
+abstract class PostModel with _$PostModel {
   const factory PostModel({
     required int id,
     required String title,

examples/postly/lib/data/post_repository_impl.dart

@@ -12,9 +12,9 @@ class PostRepositoryImpl implements PostRepository {
   Future<Either<Exception, List<Post>>> getPosts() async {
     try {
       final posts = await api.getPosts();
-      return Right(posts
+      return Right(
-          .map((e) => Post(id: e.id, title: e.title, body: e.body))
+        posts.map((e) => Post(id: e.id, title: e.title, body: e.body)).toList(),
-          .toList());
+      );
     } catch (e) {
       return Left(Exception(e.toString()));
     }

examples/postly/lib/di/app_module.dart

@@ -15,16 +15,17 @@ abstract class AppModule extends Module {
   @provide()
   @singleton()
   TalkerDioLoggerSettings talkerDioLoggerSettings() => TalkerDioLoggerSettings(
-        printRequestHeaders: true,
+    printRequestHeaders: true,
-        printResponseHeaders: true,
+    printResponseHeaders: true,
-        printResponseMessage: true,
+    printResponseMessage: true,
-      );
+  );
 
   @provide()
   @singleton()
   TalkerDioLogger talkerDioLogger(
-          Talker talker, TalkerDioLoggerSettings settings) =>
+    Talker talker,
-      TalkerDioLogger(talker: talker, settings: settings);
+    TalkerDioLoggerSettings settings,
+  ) => TalkerDioLogger(talker: talker, settings: settings);
 
   @instance()
   int timeout() => 1000;
@@ -75,12 +76,14 @@ abstract class AppModule extends Module {
   @provide()
   @named('TestProvideWithParams1')
   String testProvideWithParams1(
-          @named('baseUrl') String baseUrl, @params() dynamic params) =>
+    @named('baseUrl') String baseUrl,
-      "hello $params";
+    @params() dynamic params,
+  ) => "hello $params";
 
   @provide()
   @named('TestProvideAsyncWithParams1')
   Future<String> testProvideAsyncWithParams1(
-          @named('baseUrl') String baseUrl, @params() dynamic params) async =>
+    @named('baseUrl') String baseUrl,
-      "hello $params";
+    @params() dynamic params,
+  ) async => "hello $params";
 }

examples/postly/lib/domain/entity/post.dart

@@ -3,7 +3,7 @@ import 'package:freezed_annotation/freezed_annotation.dart';
 part 'post.freezed.dart';
 
 @freezed
-class Post with _$Post {
+abstract class Post with _$Post {
   const factory Post({
     required int id,
     required String title,

examples/postly/lib/main.dart

@@ -23,10 +23,10 @@ void main() {
   }
 
   // Используем safe root scope для гарантии защиты
-  CherryPick.openRootScope()
+  CherryPick.openRootScope().installModules([
-      .installModules([CoreModule(talker: talker), $AppModule()]);
+    CoreModule(talker: talker),
+    $AppModule(),
+  ]);
 
-  runApp(MyApp(
+  runApp(MyApp(talker: talker));
-    talker: talker,
-  ));
 }

examples/postly/lib/presentation/pages/post_details_page.dart

@@ -12,10 +12,7 @@ class PostDetailsPage extends StatelessWidget {
   Widget build(BuildContext context) {
     return Scaffold(
       appBar: AppBar(title: Text('Post #${post.id}')),
-      body: Padding(
+      body: Padding(padding: const EdgeInsets.all(16), child: Text(post.body)),
-        padding: const EdgeInsets.all(16),
-        child: Text(post.body),
-      ),
     );
   }
 }

examples/postly/lib/presentation/pages/posts_page.dart

@@ -38,8 +38,9 @@ class PostsPage extends StatelessWidget {
                   title: Text(posts[i].title),
                   subtitle: Text(posts[i].body),
                   onTap: () {
-                    AutoRouter.of(context)
+                    AutoRouter.of(
-                        .push(PostDetailsRoute(post: posts[i]));
+                      context,
+                    ).push(PostDetailsRoute(post: posts[i]));
                   },
                 ),
               ),

examples/postly/lib/router/app_router.dart

@@ -5,8 +5,8 @@ import 'app_router.gr.dart';
 class AppRouter extends RootStackRouter {
   @override
   List<AutoRoute> get routes => [
-        AutoRoute(page: PostsRoute.page, initial: true),
+    AutoRoute(page: PostsRoute.page, initial: true),
-        AutoRoute(page: PostDetailsRoute.page),
+    AutoRoute(page: PostDetailsRoute.page),
-        AutoRoute(page: LogsRoute.page),
+    AutoRoute(page: LogsRoute.page),
-      ];
+  ];
 }

examples/postly/pubspec.lock

@@ -5,18 +5,18 @@ packages:
     dependency: transitive
     description:
       name: _fe_analyzer_shared
-      sha256: e55636ed79578b9abca5fecf9437947798f5ef7456308b5cb85720b793eac92f
+      sha256: c209688d9f5a5f26b2fb47a188131a6fb9e876ae9e47af3737c0b4f58a93470d
       url: "https://pub.dev"
     source: hosted
-    version: "82.0.0"
+    version: "91.0.0"
   analyzer:
     dependency: transitive
     description:
       name: analyzer
-      sha256: "904ae5bb474d32c38fb9482e2d925d5454cda04ddd0e55d2e6826bc72f6ba8c0"
+      sha256: f51c8499b35f9b26820cfe914828a6a98a94efd5cc78b37bb7d03debae3a1d08
       url: "https://pub.dev"
     source: hosted
-    version: "7.4.5"
+    version: "8.4.1"
   ansi_styles:
     dependency: transitive
     description:
@@ -45,34 +45,34 @@ packages:
     dependency: transitive
     description:
       name: async
-      sha256: d2872f9c19731c2e5f10444b14686eb7cc85c76274bd6c16e1816bff9a3bab63
+      sha256: "758e6d74e971c3e5aceb4110bfd6698efc7f501675bcfe0c775459a8140750eb"
       url: "https://pub.dev"
     source: hosted
-    version: "2.12.0"
+    version: "2.13.0"
   auto_route:
     dependency: "direct main"
     description:
       name: auto_route
-      sha256: "1d1bd908a1fec327719326d5d0791edd37f16caff6493c01003689fb03315ad7"
+      sha256: "6d3ccc11b520b6eff0ab5a2c3d1c43c46d1486249cc746c4bb14486d876e8b43"
       url: "https://pub.dev"
     source: hosted
-    version: "9.3.0+1"
+    version: "10.3.0"
   auto_route_generator:
-    dependency: "direct main"
+    dependency: "direct dev"
     description:
       name: auto_route_generator
-      sha256: c2e359d8932986d4d1bcad7a428143f81384ce10fef8d4aa5bc29e1f83766a46
+      sha256: a84dcd972e3e38c8925cca2669faa8112a79db9b5d726e0fb8d4ea15ced095fb
       url: "https://pub.dev"
     source: hosted
-    version: "9.3.1"
+    version: "10.3.1"
   bloc:
     dependency: transitive
     description:
       name: bloc
-      sha256: "52c10575f4445c61dd9e0cafcc6356fdd827c4c64dd7945ef3c4105f6b6ac189"
+      sha256: a48653a82055a900b88cd35f92429f068c5a8057ae9b136d197b3d56c57efb81
       url: "https://pub.dev"
     source: hosted
-    version: "9.0.0"
+    version: "9.2.0"
   boolean_selector:
     dependency: transitive
     description:
@@ -85,50 +85,50 @@ packages:
     dependency: transitive
     description:
       name: build
-      sha256: cef23f1eda9b57566c81e2133d196f8e3df48f244b317368d65c5943d91148f0
+      sha256: ce76b1d48875e3233fde17717c23d1f60a91cc631597e49a400c89b475395b1d
       url: "https://pub.dev"
     source: hosted
-    version: "2.4.2"
+    version: "3.1.0"
   build_config:
     dependency: transitive
     description:
       name: build_config
-      sha256: bf80fcfb46a29945b423bd9aad884590fb1dc69b330a4d4700cac476af1708d1
+      sha256: "4f64382b97504dc2fcdf487d5aae33418e08b4703fc21249e4db6d804a4d0187"
       url: "https://pub.dev"
     source: hosted
-    version: "1.1.1"
+    version: "1.2.0"
   build_daemon:
     dependency: transitive
     description:
       name: build_daemon
-      sha256: "79b2aef6ac2ed00046867ed354c88778c9c0f029df8a20fe10b5436826721ef9"
+      sha256: bf05f6e12cfea92d3c09308d7bcdab1906cd8a179b023269eed00c071004b957
       url: "https://pub.dev"
     source: hosted
-    version: "4.0.2"
+    version: "4.1.1"
   build_resolvers:
     dependency: transitive
     description:
       name: build_resolvers
-      sha256: b9e4fda21d846e192628e7a4f6deda6888c36b5b69ba02ff291a01fd529140f0
+      sha256: d1d57f7807debd7349b4726a19fd32ec8bc177c71ad0febf91a20f84cd2d4b46
       url: "https://pub.dev"
     source: hosted
-    version: "2.4.4"
+    version: "3.0.3"
   build_runner:
-    dependency: "direct main"
+    dependency: "direct dev"
     description:
       name: build_runner
-      sha256: "058fe9dce1de7d69c4b84fada934df3e0153dd000758c4d65964d0166779aa99"
+      sha256: b24597fceb695969d47025c958f3837f9f0122e237c6a22cb082a5ac66c3ca30
       url: "https://pub.dev"
     source: hosted
-    version: "2.4.15"
+    version: "2.7.1"
   build_runner_core:
     dependency: transitive
     description:
       name: build_runner_core
-      sha256: "22e3aa1c80e0ada3722fe5b63fd43d9c8990759d0a2cf489c8c5d7b2bdebc021"
+      sha256: "066dda7f73d8eb48ba630a55acb50c4a84a2e6b453b1cb4567f581729e794f7b"
       url: "https://pub.dev"
     source: hosted
-    version: "8.0.0"
+    version: "9.3.1"
   built_collection:
     dependency: transitive
     description:
@@ -141,10 +141,10 @@ packages:
     dependency: transitive
     description:
       name: built_value
-      sha256: ea90e81dc4a25a043d9bee692d20ed6d1c4a1662a28c03a96417446c093ed6b4
+      sha256: "7931c90b84bc573fef103548e354258ae4c9d28d140e41961df6843c5d60d4d8"
       url: "https://pub.dev"
     source: hosted
-    version: "8.9.5"
+    version: "8.12.3"
   characters:
     dependency: transitive
     description:
@@ -165,39 +165,39 @@ packages:
     dependency: transitive
     description:
       name: checked_yaml
-      sha256: feb6bed21949061731a7a75fc5d2aa727cf160b91af9a3e464c5e3a32e28b5ff
+      sha256: "959525d3162f249993882720d52b7e0c833978df229be20702b33d48d91de70f"
       url: "https://pub.dev"
     source: hosted
-    version: "2.0.3"
+    version: "2.0.4"
   cherrypick:
     dependency: "direct main"
     description:
       path: "../../cherrypick"
       relative: true
     source: path
-    version: "3.0.0-dev.12"
+    version: "3.0.2"
   cherrypick_annotations:
     dependency: "direct main"
     description:
       path: "../../cherrypick_annotations"
       relative: true
     source: path
-    version: "1.1.2-dev.2"
+    version: "3.0.2"
   cherrypick_generator:
-    dependency: "direct main"
+    dependency: "direct dev"
     description:
       path: "../../cherrypick_generator"
       relative: true
     source: path
-    version: "2.0.0-dev.2"
+    version: "3.0.2"
   cli_launcher:
     dependency: transitive
     description:
       name: cli_launcher
-      sha256: "67d89e0a1c07b103d1253f6b953a43d3f502ee36805c8cfc21196282c9ddf177"
+      sha256: "17d2744fb9a254c49ec8eda582536abe714ea0131533e24389843a4256f82eac"
       url: "https://pub.dev"
     source: hosted
-    version: "0.3.2"
+    version: "0.3.2+1"
   cli_util:
     dependency: transitive
     description:
@@ -218,10 +218,10 @@ packages:
     dependency: transitive
     description:
       name: code_builder
-      sha256: "0ec10bf4a89e4c613960bf1e8b42c64127021740fb21640c29c909826a5eea3e"
+      sha256: "6a6cab2ba4680d6423f34a9b972a4c9a94ebe1b62ecec4e1a1f2cba91fd1319d"
       url: "https://pub.dev"
     source: hosted
-    version: "4.10.1"
+    version: "4.11.1"
   collection:
     dependency: transitive
     description:
@@ -234,10 +234,10 @@ packages:
     dependency: transitive
     description:
       name: conventional_commit
-      sha256: fad254feb6fb8eace2be18855176b0a4b97e0d50e416ff0fe590d5ba83735d34
+      sha256: c40b1b449ce2a63fa2ce852f35e3890b1e182f5951819934c0e4a66254bc0dc3
       url: "https://pub.dev"
     source: hosted
-    version: "0.6.1"
+    version: "0.6.1+1"
   convert:
     dependency: transitive
     description:
@@ -250,18 +250,18 @@ packages:
     dependency: transitive
     description:
       name: cross_file
-      sha256: "7caf6a750a0c04effbb52a676dce9a4a592e10ad35c34d6d2d0e4811160d5670"
+      sha256: "701dcfc06da0882883a2657c445103380e53e647060ad8d9dfb710c100996608"
       url: "https://pub.dev"
     source: hosted
-    version: "0.3.4+2"
+    version: "0.3.5+1"
   crypto:
     dependency: transitive
     description:
       name: crypto
-      sha256: "1e445881f28f22d6140f181e07737b22f1e099a5e1ff94b0af2f9e4a463f4855"
+      sha256: c8ea0233063ba03258fbcf2ca4d6dadfefe14f02fab57702265467a19f27fadf
       url: "https://pub.dev"
     source: hosted
-    version: "3.0.6"
+    version: "3.0.7"
   cupertino_icons:
     dependency: "direct main"
     description:
@@ -274,10 +274,10 @@ packages:
     dependency: transitive
     description:
       name: dart_style
-      sha256: "5b236382b47ee411741447c1f1e111459c941ea1b3f2b540dde54c210a3662af"
+      sha256: a9c30492da18ff84efe2422ba2d319a89942d93e58eb0b73d32abe822ef54b7b
       url: "https://pub.dev"
     source: hosted
-    version: "3.1.0"
+    version: "3.1.3"
   dartz:
     dependency: "direct main"
     description:
@@ -290,10 +290,10 @@ packages:
     dependency: "direct main"
     description:
       name: dio
-      sha256: "253a18bbd4851fecba42f7343a1df3a9a4c1d31a2c1b37e221086b4fa8c8dbc9"
+      sha256: b9d46faecab38fc8cc286f80bc4d61a3bb5d4ac49e51ed877b4d6706efe57b25
       url: "https://pub.dev"
     source: hosted
-    version: "5.8.0+1"
+    version: "5.9.1"
   dio_web_adapter:
     dependency: transitive
     description:
@@ -306,18 +306,18 @@ packages:
     dependency: transitive
     description:
       name: fake_async
-      sha256: "6a95e56b2449df2273fd8c45a662d6947ce1ebb7aafe80e550a3f68297f3cacc"
+      sha256: "5368f224a74523e8d2e7399ea1638b37aecfca824a3cc4dfdf77bf1fa905ac44"
       url: "https://pub.dev"
     source: hosted
-    version: "1.3.2"
+    version: "1.3.3"
   ffi:
     dependency: transitive
     description:
       name: ffi
-      sha256: "289279317b4b16eb2bb7e271abccd4bf84ec9bdcbe999e278a94b804f5630418"
+      sha256: d07d37192dbf97461359c1518788f203b0c9102cfd2c35a716b823741219542c
       url: "https://pub.dev"
     source: hosted
-    version: "2.1.4"
+    version: "2.1.5"
   file:
     dependency: transitive
     description:
@@ -348,15 +348,15 @@ packages:
     source: hosted
     version: "9.1.1"
   flutter_lints:
-    dependency: "direct main"
+    dependency: "direct dev"
     description:
       name: flutter_lints
-      sha256: "5398f14efa795ffb7a33e9b6a08798b26a180edac4ad7db3f231e40f82ce11e1"
+      sha256: "3105dc8492f6183fb076ccf1f351ac3d60564bff92e20bfc4af9cc1651f4e7e1"
       url: "https://pub.dev"
     source: hosted
-    version: "5.0.0"
+    version: "6.0.0"
   flutter_test:
-    dependency: "direct main"
+    dependency: "direct dev"
     description: flutter
     source: sdk
     version: "0.0.0"
@@ -366,21 +366,21 @@ packages:
     source: sdk
     version: "0.0.0"
   freezed:
-    dependency: "direct main"
+    dependency: "direct dev"
     description:
       name: freezed
-      sha256: "59a584c24b3acdc5250bb856d0d3e9c0b798ed14a4af1ddb7dc1c7b41df91c9c"
+      sha256: "13065f10e135263a4f5a4391b79a8efc5fb8106f8dd555a9e49b750b45393d77"
       url: "https://pub.dev"
     source: hosted
-    version: "2.5.8"
+    version: "3.2.3"
   freezed_annotation:
     dependency: "direct main"
     description:
       name: freezed_annotation
-      sha256: c2e2d632dd9b8a2b7751117abcfc2b4888ecfe181bd9fca7170d9ef02e595fe2
+      sha256: "7294967ff0a6d98638e7acb774aac3af2550777accd8149c90af5b014e6d44d8"
       url: "https://pub.dev"
     source: hosted
-    version: "2.4.4"
+    version: "3.1.0"
   frontend_server_client:
     dependency: transitive
     description:
@@ -413,14 +413,22 @@ packages:
       url: "https://pub.dev"
     source: hosted
     version: "5.3.4"
+  hotreloader:
+    dependency: transitive
+    description:
+      name: hotreloader
+      sha256: bc167a1163807b03bada490bfe2df25b0d744df359227880220a5cbd04e5734b
+      url: "https://pub.dev"
+    source: hosted
+    version: "4.3.0"
   http:
     dependency: transitive
     description:
       name: http
-      sha256: "2c11f3f94c687ee9bad77c171151672986360b2b001d109814ee7140b2cf261b"
+      sha256: "87721a4a50b19c7f1d49001e51409bddc46303966ce89a65af4f4e6004896412"
       url: "https://pub.dev"
     source: hosted
-    version: "1.4.0"
+    version: "1.6.0"
   http_multi_server:
     dependency: transitive
     description:
@@ -433,18 +441,10 @@ packages:
     dependency: transitive
     description:
       name: http_parser
-      sha256: "2aa08ce0341cc9b354a498388e30986515406668dbcc4f7c950c3e715496693b"
+      sha256: "178d74305e7866013777bab2c3d8726205dc5a4dd935297175b19a23a2e66571"
       url: "https://pub.dev"
     source: hosted
-    version: "4.0.2"
+    version: "4.1.2"
-  intl:
-    dependency: transitive
-    description:
-      name: intl
-      sha256: d6f56758b7d3014a48af9701c085700aac781a92a87a62b1333b46d8879661cf
-      url: "https://pub.dev"
-    source: hosted
-    version: "0.19.0"
   io:
     dependency: transitive
     description:
@@ -453,16 +453,8 @@ packages:
       url: "https://pub.dev"
     source: hosted
     version: "1.0.5"
-  js:
-    dependency: transitive
-    description:
-      name: js
-      sha256: c1b2e9b5ea78c45e1a0788d29606ba27dc5f71f019f32ca5140f61ef071838cf
-      url: "https://pub.dev"
-    source: hosted
-    version: "0.7.1"
   json_annotation:
-    dependency: transitive
+    dependency: "direct main"
     description:
       name: json_annotation
       sha256: "1ce844379ca14835a50d2f019a3099f419082cfdd231cd86a142af94dd5c6bb1"
@@ -470,45 +462,53 @@ packages:
     source: hosted
     version: "4.9.0"
   json_serializable:
-    dependency: "direct main"
+    dependency: "direct dev"
     description:
       name: json_serializable
-      sha256: c50ef5fc083d5b5e12eef489503ba3bf5ccc899e487d691584699b4bdefeea8c
+      sha256: c5b2ee75210a0f263c6c7b9eeea80553dbae96ea1bf57f02484e806a3ffdffa3
       url: "https://pub.dev"
     source: hosted
-    version: "6.9.5"
+    version: "6.11.2"
   leak_tracker:
     dependency: transitive
     description:
       name: leak_tracker
-      sha256: c35baad643ba394b40aac41080300150a4f08fd0fd6a10378f8f7c6bc161acec
+      sha256: "33e2e26bdd85a0112ec15400c8cbffea70d0f9c3407491f672a2fad47915e2de"
       url: "https://pub.dev"
     source: hosted
-    version: "10.0.8"
+    version: "11.0.2"
   leak_tracker_flutter_testing:
     dependency: transitive
     description:
       name: leak_tracker_flutter_testing
-      sha256: f8b613e7e6a13ec79cfdc0e97638fddb3ab848452eff057653abd3edba760573
+      sha256: "1dbc140bb5a23c75ea9c4811222756104fbcd1a27173f0c34ca01e16bea473c1"
       url: "https://pub.dev"
     source: hosted
-    version: "3.0.9"
+    version: "3.0.10"
   leak_tracker_testing:
     dependency: transitive
     description:
       name: leak_tracker_testing
-      sha256: "6ba465d5d76e67ddf503e1161d1f4a6bc42306f9d66ca1e8f079a47290fb06d3"
+      sha256: "8d5a2d49f4a66b49744b23b018848400d23e54caf9463f4eb20df3eb8acb2eb1"
       url: "https://pub.dev"
     source: hosted
-    version: "3.0.1"
+    version: "3.0.2"
+  lean_builder:
+    dependency: transitive
+    description:
+      name: lean_builder
+      sha256: "4f3d70c34c52cc5034e8cc6f53d35aa3a32fb373b78fb4c29cf45cd1dcf06942"
+      url: "https://pub.dev"
+    source: hosted
+    version: "0.1.5"
   lints:
     dependency: transitive
     description:
       name: lints
-      sha256: "3315600f3fb3b135be672bf4a178c55f274bebe368325ae18462c89ac1e3b413"
+      sha256: a5e2b223cb7c9c8efdc663ef484fdd95bb243bff242ef5b13e26883547fce9a0
       url: "https://pub.dev"
     source: hosted
-    version: "5.0.0"
+    version: "6.0.0"
   logging:
     dependency: transitive
     description:
@@ -537,18 +537,18 @@ packages:
     dependency: "direct dev"
     description:
       name: melos
-      sha256: "3f3ab3f902843d1e5a1b1a4dd39a4aca8ba1056f2d32fd8995210fa2843f646f"
+      sha256: "4280dc46bd5b741887cce1e67e5c1a6aaf3c22310035cf5bd33dceeeda62ed22"
       url: "https://pub.dev"
     source: hosted
-    version: "6.3.2"
+    version: "6.3.3"
   meta:
     dependency: transitive
     description:
       name: meta
-      sha256: e3641ec5d63ebf0d9b41bd43201a66e3fc79a65db5f61fc181f04cd27aab950c
+      sha256: "23f08335362185a5ea2ad3a4e597f1375e78bce8a040df5c600c8d3552ef2394"
       url: "https://pub.dev"
     source: hosted
-    version: "1.16.0"
+    version: "1.17.0"
   mime:
     dependency: transitive
     description:
@@ -561,10 +561,10 @@ packages:
     dependency: transitive
     description:
       name: mustache_template
-      sha256: a46e26f91445bfb0b60519be280555b06792460b27b19e2b19ad5b9740df5d1c
+      sha256: "4326d0002ff58c74b9486990ccbdab08157fca3c996fe9e197aff9d61badf307"
       url: "https://pub.dev"
     source: hosted
-    version: "2.0.0"
+    version: "2.0.3"
   nested:
     dependency: transitive
     description:
@@ -601,18 +601,18 @@ packages:
     dependency: transitive
     description:
       name: path_provider_android
-      sha256: d0d310befe2c8ab9e7f393288ccbb11b60c019c6b5afc21973eeee4dda2b35e9
+      sha256: f2c65e21139ce2c3dad46922be8272bb5963516045659e71bb16e151c93b580e
       url: "https://pub.dev"
     source: hosted
-    version: "2.2.17"
+    version: "2.2.22"
   path_provider_foundation:
     dependency: transitive
     description:
       name: path_provider_foundation
-      sha256: "4843174df4d288f5e29185bd6e72a6fbdf5a4a4602717eed565497429f179942"
+      sha256: "6d13aece7b3f5c5a9731eaf553ff9dcbc2eff41087fd2df587fd0fed9a3eb0c4"
       url: "https://pub.dev"
     source: hosted
-    version: "2.4.1"
+    version: "2.5.1"
   path_provider_linux:
     dependency: transitive
     description:
@@ -637,14 +637,6 @@ packages:
       url: "https://pub.dev"
     source: hosted
     version: "2.3.0"
-  petitparser:
-    dependency: transitive
-    description:
-      name: petitparser
-      sha256: c15605cd28af66339f8eb6fbe0e541bfe2d1b72d5825efc6598f3e0a31b9ad27
-      url: "https://pub.dev"
-    source: hosted
-    version: "6.0.2"
   platform:
     dependency: transitive
     description:
@@ -665,10 +657,10 @@ packages:
     dependency: transitive
     description:
       name: pool
-      sha256: "20fe868b6314b322ea036ba325e6fc0711a22948856475e2c2b6306e8ab39c2a"
+      sha256: "978783255c543aa3586a1b3c21f6e9d720eb315376a915872c61ef8b5c20177d"
       url: "https://pub.dev"
     source: hosted
-    version: "1.5.1"
+    version: "1.5.2"
   process:
     dependency: transitive
     description:
@@ -689,18 +681,18 @@ packages:
     dependency: transitive
     description:
       name: protobuf
-      sha256: "579fe5557eae58e3adca2e999e38f02441d8aa908703854a9e0a0f47fa857731"
+      sha256: "75ec242d22e950bdcc79ee38dd520ce4ee0bc491d7fadc4ea47694604d22bf06"
       url: "https://pub.dev"
     source: hosted
-    version: "4.1.0"
+    version: "6.0.0"
   provider:
     dependency: transitive
     description:
       name: provider
-      sha256: "4abbd070a04e9ddc287673bf5a030c7ca8b685ff70218720abab8b092f53dd84"
+      sha256: "4e82183fa20e5ca25703ead7e05de9e4cceed1fbd1eadc1ac3cb6f565a09f272"
       url: "https://pub.dev"
     source: hosted
-    version: "6.1.5"
+    version: "6.1.5+1"
   pub_semver:
     dependency: transitive
     description:
@@ -713,66 +705,66 @@ packages:
     dependency: transitive
     description:
       name: pub_updater
-      sha256: "54e8dc865349059ebe7f163d6acce7c89eb958b8047e6d6e80ce93b13d7c9e60"
+      sha256: "739a0161d73a6974c0675b864fb0cf5147305f7b077b7f03a58fa7a9ab3e7e7d"
       url: "https://pub.dev"
     source: hosted
-    version: "0.4.0"
+    version: "0.5.0"
   pubspec_parse:
     dependency: transitive
     description:
       name: pubspec_parse
-      sha256: "81876843eb50dc2e1e5b151792c9a985c5ed2536914115ed04e9c8528f6647b0"
+      sha256: "0560ba233314abbed0a48a2956f7f022cce7c3e1e73df540277da7544cad4082"
       url: "https://pub.dev"
     source: hosted
-    version: "1.4.0"
+    version: "1.5.0"
   retrofit:
     dependency: "direct main"
     description:
       name: retrofit
-      sha256: c6cc9ad3374e6d07008343140a67afffaaa34cdf6bf08d4847d91417a99dcf45
+      sha256: "0f629ed26b2c48c66fe54bd548313c6fdf7955be18bff37e08a46dd3f97f8eaf"
       url: "https://pub.dev"
     source: hosted
-    version: "4.4.2"
+    version: "4.9.2"
   retrofit_generator:
-    dependency: "direct main"
+    dependency: "direct dev"
     description:
       name: retrofit_generator
-      sha256: "65d28d3a7b4db485f1c73fee8ee32f552ef23ee4ecb68ba491f39d80b73bdcbf"
+      sha256: fed2c4e4ed6dab084c00d25c739988aa3cec1acd2b168771136188cced8d967d
       url: "https://pub.dev"
     source: hosted
-    version: "9.2.0"
+    version: "10.2.1"
   share_plus:
     dependency: transitive
     description:
       name: share_plus
-      sha256: b2961506569e28948d75ec346c28775bb111986bb69dc6a20754a457e3d97fa0
+      sha256: "14c8860d4de93d3a7e53af51bff479598c4e999605290756bbbe45cf65b37840"
       url: "https://pub.dev"
     source: hosted
-    version: "11.0.0"
+    version: "12.0.1"
   share_plus_platform_interface:
     dependency: transitive
     description:
       name: share_plus_platform_interface
-      sha256: "1032d392bc5d2095a77447a805aa3f804d2ae6a4d5eef5e6ebb3bd94c1bc19ef"
+      sha256: "88023e53a13429bd65d8e85e11a9b484f49d4c190abbd96c7932b74d6927cc9a"
       url: "https://pub.dev"
     source: hosted
-    version: "6.0.0"
+    version: "6.1.0"
   shelf:
     dependency: transitive
     description:
       name: shelf
-      sha256: ad29c505aee705f41a4d8963641f91ac4cee3c8fad5947e033390a7bd8180fa4
+      sha256: e7dd780a7ffb623c57850b33f43309312fc863fb6aa3d276a754bb299839ef12
       url: "https://pub.dev"
     source: hosted
-    version: "1.4.1"
+    version: "1.4.2"
   shelf_web_socket:
     dependency: transitive
     description:
       name: shelf_web_socket
-      sha256: cc36c297b52866d203dbf9332263c94becc2fe0ceaa9681d07b6ef9807023b67
+      sha256: "3632775c8e90d6c9712f883e633716432a27758216dfb61bd86a8321c0580925"
       url: "https://pub.dev"
     source: hosted
-    version: "2.0.1"
+    version: "3.0.0"
   sky_engine:
     dependency: transitive
     description: flutter
@@ -782,18 +774,18 @@ packages:
     dependency: transitive
     description:
       name: source_gen
-      sha256: "35c8150ece9e8c8d263337a265153c3329667640850b9304861faea59fc98f6b"
+      sha256: "1d562a3c1f713904ebbed50d2760217fd8a51ca170ac4b05b0db490699dbac17"
       url: "https://pub.dev"
     source: hosted
-    version: "2.0.0"
+    version: "4.2.0"
   source_helper:
     dependency: transitive
     description:
       name: source_helper
-      sha256: "86d247119aedce8e63f4751bd9626fc9613255935558447569ad42f9f5b48b3c"
+      sha256: "6a3c6cc82073a8797f8c4dc4572146114a39652851c157db37e964d9c7038723"
       url: "https://pub.dev"
     source: hosted
-    version: "1.3.5"
+    version: "1.3.8"
   source_span:
     dependency: transitive
     description:
@@ -802,14 +794,6 @@ packages:
       url: "https://pub.dev"
     source: hosted
     version: "1.10.1"
-  sprintf:
-    dependency: transitive
-    description:
-      name: sprintf
-      sha256: "1fc9ffe69d4df602376b52949af107d8f5703b77cda567c4d7d86a0693120f23"
-      url: "https://pub.dev"
-    source: hosted
-    version: "7.0.0"
   stack_trace:
     dependency: transitive
     description:
@@ -846,49 +830,49 @@ packages:
     dependency: transitive
     description:
       name: talker
-      sha256: "028a753874d98df39f210cb74f0ee09a0a95e28f8bc2dc975c3c328e24fde23d"
+      sha256: "4160d27f4da6d87f016212bbe6abfb15c8954b72726a0f154d72f77664c48b8c"
       url: "https://pub.dev"
     source: hosted
-    version: "4.9.3"
+    version: "5.1.13"
   talker_bloc_logger:
     dependency: "direct main"
     description:
       name: talker_bloc_logger
-      sha256: cf1e3b1d70f9a47e061288f0d230ba0e04a0f6394629d5df1c7b0933b236e397
+      sha256: d69cfaf3b7294babc1f2b0e297fb33b885cc859a4ceae5393bd39da9eb93e537
       url: "https://pub.dev"
     source: hosted
-    version: "4.9.3"
+    version: "5.1.13"
   talker_cherrypick_logger:
     dependency: "direct main"
     description:
       path: "../../talker_cherrypick_logger"
       relative: true
     source: path
-    version: "1.1.0-dev.7"
+    version: "3.0.2"
   talker_dio_logger:
     dependency: "direct main"
     description:
       name: talker_dio_logger
-      sha256: dcf784f1841e248c270ef741f8a07ca9cf562c6424ee43fc6e598c4eb7f18238
+      sha256: c5769f4b1ee6fcc1a0670cdfc7f3253016a1090b583aeb70e3ccd73f479970a8
       url: "https://pub.dev"
     source: hosted
-    version: "4.9.3"
+    version: "5.1.13"
   talker_flutter:
     dependency: "direct main"
     description:
       name: talker_flutter
-      sha256: "2cfee6661277d415a895b6258ecb0bf80d7b564e91ea7e769fc6d0f970a01c09"
+      sha256: "6a807972565dc7d5bacfb6a980efa0f766bfdbacac5660adf150aa386c440052"
       url: "https://pub.dev"
     source: hosted
-    version: "4.9.3"
+    version: "5.1.13"
   talker_logger:
     dependency: transitive
     description:
       name: talker_logger
-      sha256: "778ec673f1b71a6516e5576ae8d90ea23bbbcf9f405a97cc30e8ccdc33e26d27"
+      sha256: ed5f8434f17f3988548abc5f617b88e7a5d2d61d7a975e7c12eee75755848aa8
       url: "https://pub.dev"
     source: hosted
-    version: "4.9.3"
+    version: "5.1.13"
   term_glyph:
     dependency: transitive
     description:
@@ -901,10 +885,10 @@ packages:
     dependency: transitive
     description:
       name: test_api
-      sha256: fb31f383e2ee25fbbfe06b40fe21e1e458d14080e3c67e7ba0acfde4df4e0bbd
+      sha256: ab2726c1a94d3176a45960b6234466ec367179b87dd74f1611adb1f3b5fb9d55
       url: "https://pub.dev"
     source: hosted
-    version: "0.7.4"
+    version: "0.7.7"
   timing:
     dependency: transitive
     description:
@@ -925,10 +909,10 @@ packages:
     dependency: transitive
     description:
       name: url_launcher_linux
-      sha256: "4e9ba368772369e3e08f231d2301b4ef72b9ff87c31192ef471b380ef29a4935"
+      sha256: d5e14138b3bc193a0f63c10a53c94b91d399df0512b1f29b94a043db7482384a
       url: "https://pub.dev"
     source: hosted
-    version: "3.2.1"
+    version: "3.2.2"
   url_launcher_platform_interface:
     dependency: transitive
     description:
@@ -941,50 +925,50 @@ packages:
     dependency: transitive
     description:
       name: url_launcher_web
-      sha256: "4bd2b7b4dc4d4d0b94e5babfffbca8eac1a126c7f3d6ecbc1a11013faa3abba2"
+      sha256: d0412fcf4c6b31ecfdb7762359b7206ffba3bbffd396c6d9f9c4616ece476c1f
       url: "https://pub.dev"
     source: hosted
-    version: "2.4.1"
+    version: "2.4.2"
   url_launcher_windows:
     dependency: transitive
     description:
       name: url_launcher_windows
-      sha256: "3284b6d2ac454cf34f114e1d3319866fdd1e19cdc329999057e44ffe936cfa77"
+      sha256: "712c70ab1b99744ff066053cbe3e80c73332b38d46e5e945c98689b2e66fc15f"
       url: "https://pub.dev"
     source: hosted
-    version: "3.1.4"
+    version: "3.1.5"
   uuid:
     dependency: transitive
     description:
       name: uuid
-      sha256: a5be9ef6618a7ac1e964353ef476418026db906c4facdedaa299b7a2e71690ff
+      sha256: a11b666489b1954e01d992f3d601b1804a33937b5a8fe677bd26b8a9f96f96e8
       url: "https://pub.dev"
     source: hosted
-    version: "4.5.1"
+    version: "4.5.2"
   vector_math:
     dependency: transitive
     description:
       name: vector_math
-      sha256: "80b3257d1492ce4d091729e3a67a60407d227c27241d6927be0130c98e741803"
+      sha256: d530bd74fea330e6e364cda7a85019c434070188383e1cd8d9777ee586914c5b
       url: "https://pub.dev"
     source: hosted
-    version: "2.1.4"
+    version: "2.2.0"
   vm_service:
     dependency: transitive
     description:
       name: vm_service
-      sha256: "0968250880a6c5fe7edc067ed0a13d4bae1577fe2771dcf3010d52c4a9d3ca14"
+      sha256: "45caa6c5917fa127b5dbcfbd1fa60b14e583afdc08bfc96dda38886ca252eb60"
       url: "https://pub.dev"
     source: hosted
-    version: "14.3.1"
+    version: "15.0.2"
   watcher:
     dependency: transitive
     description:
       name: watcher
-      sha256: "69da27e49efa56a15f8afe8f4438c4ec02eff0a117df1b22ea4aad194fe1c104"
+      sha256: "1398c9f081a753f9226febe8900fce8f7d0a67163334e1c94a2438339d79d635"
       url: "https://pub.dev"
     source: hosted
-    version: "1.1.1"
+    version: "1.2.1"
   web:
     dependency: transitive
     description:
@@ -1013,10 +997,10 @@ packages:
     dependency: transitive
     description:
       name: win32
-      sha256: "329edf97fdd893e0f1e3b9e88d6a0e627128cc17cc316a8d67fda8f1451178ba"
+      sha256: d7cb55e04cd34096cd3a79b3330245f54cb96a370a1c27adb3c84b917de8b08e
       url: "https://pub.dev"
     source: hosted
-    version: "5.13.0"
+    version: "5.15.0"
   xdg_directories:
     dependency: transitive
     description:
@@ -1025,14 +1009,14 @@ packages:
       url: "https://pub.dev"
     source: hosted
     version: "1.1.0"
-  xml:
+  xxh3:
     dependency: transitive
     description:
-      name: xml
+      name: xxh3
-      sha256: b015a8ad1c488f66851d762d3090a21c600e479dc75e68328c52774040cf9226
+      sha256: "399a0438f5d426785723c99da6b16e136f4953fb1e9db0bf270bd41dd4619916"
       url: "https://pub.dev"
     source: hosted
-    version: "6.5.0"
+    version: "1.2.0"
   yaml:
     dependency: transitive
     description:
@@ -1045,10 +1029,10 @@ packages:
     dependency: transitive
     description:
       name: yaml_edit
-      sha256: fb38626579fb345ad00e674e2af3a5c9b0cc4b9bfb8fd7f7ff322c7c9e62aef5
+      sha256: ec709065bb2c911b336853b67f3732dd13e0336bd065cc2f1061d7610ddf45e3
       url: "https://pub.dev"
     source: hosted
-    version: "2.2.2"
+    version: "2.2.3"
 sdks:
-  dart: ">=3.7.0 <4.0.0"
+  dart: ">=3.10.0 <4.0.0"
-  flutter: ">=3.27.0"
+  flutter: ">=3.38.0"

examples/postly/pubspec.yaml

@@ -5,49 +5,47 @@ publish_to: 'none'
 version: 1.0.0+1
 
 environment:
-  sdk: ^3.5.2
+  sdk: ">=3.9.0 <4.0.0"
 
 
 dependencies:
   flutter:
     sdk: flutter
 
-  cherrypick:
+  cherrypick: any
-    path: ../../cherrypick
+  cherrypick_annotations: ^4.0.0-dev.0
-  cherrypick_annotations:
-    path: ../../cherrypick_annotations
   
   dio: ^5.4.0
   retrofit: ^4.0.3
-  freezed_annotation: ^2.4.4
+  freezed_annotation: ^3.0.0
+  json_annotation: ^4.9.0
   dartz: ^0.10.1
   flutter_bloc: ^9.1.1
-  auto_route: ^9.3.0+1
+  auto_route: ^10.1.0+1
 
 
   cupertino_icons: ^1.0.8
 
-  talker_flutter: ^4.9.3
+  talker_flutter: ^5.0.0
-  talker_cherrypick_logger:
+  talker_cherrypick_logger: any
-    path: ../../talker_cherrypick_logger
+  talker_dio_logger: ^5.0.0
+  talker_bloc_logger: ^5.0.0
+  
+dev_dependencies:
   flutter_test:
     sdk: flutter
 
-  flutter_lints: ^5.0.0
+  flutter_lints: ^6.0.0
 
-  cherrypick_generator:
+  build_runner: ^2.5.0
-    path: ../../cherrypick_generator
+  cherrypick_generator: ^4.0.0-dev.0
-  build_runner: 2.4.15
   
-  retrofit_generator: ^9.1.5
-  freezed: ^2.5.8
   json_serializable: ^6.9.0
-  auto_route_generator: ^9.0.0
+  retrofit_generator: ^10.0.5
-  talker_dio_logger: ^4.9.3
+  auto_route_generator: ^10.0.1
-  talker_bloc_logger: ^4.9.3
+  freezed: ^3.0.0
+  melos: ^6.3.2
 
 flutter:
-
   uses-material-design: true
-dev_dependencies:
+
-  melos: ^6.3.2

melos.yaml

@@ -13,6 +13,28 @@ packages:
   - examples/postly
 
 scripts:
+  clean_all:
+    run: |
+      melos clean
+      melos exec -- rm -rf lib/**.g.dart lib/**/**.g.dart lib/generated/
+      melos exec -- rm -rf .dart_tool build pubspec_overrides.yaml
+    description: |
+      Очищает build артефакты flutter и сгенерированный код во всех пакетах.
+
+  all:
+    steps:
+      - codegen
+      - analyze
+      - format
+      - test
+    description: Run all steps.
+
+  lint:all:
+    steps:
+      - analyze
+      - format
+    description: Run all static analysis checks.
+
   analyze:
     exec: dart analyze
 
@@ -20,11 +42,10 @@ scripts:
     exec: dart format lib
 
   test:
-    run: |
+    steps:
-      echo "Running Dart tests..."
+      - test:dart
-      melos exec --scope="cherrypick,cherrypick_annotations,cherrypick_generator" -- dart test --reporter=compact
+      - test:flutter
-      echo "Running Flutter tests..."
+    description: Run all tests.
-      melos exec --scope="cherrypick_flutter" -- flutter test --reporter=compact
 
   test:dart:
     description: "Run tests for Dart packages only"

openspec/changes/cherrypick-system-spec/.openspec.yaml

@@ -0,0 +1,2 @@
+schema: spec-driven
+created: 2026-02-27

openspec/changes/cherrypick-system-spec/design.md

@@ -0,0 +1,40 @@
+## Context
+
+CherryPick — монорепозиторий DI‑экосистемы для Dart/Flutter, включающий ядро рантайма, аннотации, генератор и Flutter‑интеграцию, а также адаптер логирования для Talker. Требуется системная спецификация модулей и их контрактов на русском языке.
+
+## Goals / Non-Goals
+
+**Goals:**
+- Зафиксировать архитектурные границы и контракты модулей.
+- Согласовать терминологию и жизненные циклы ключевых сущностей.
+- Дать проверяемые требования с однозначными сценариями.
+
+**Non-Goals:**
+- Изменение или рефакторинг кода.
+- Детализация низкоуровневых алгоритмов генератора.
+- Документация внешних библиотек (Flutter, Talker).
+
+## Decisions
+
+- Разбить спецификацию по четырем capability: `di-runtime`, `annotations-and-codegen`, `flutter-integration`, `talker-logging-adapter`.
+- Все требования формулировать нормативно (MUST) и снабжать сценариями WHEN/THEN.
+- Описывать сущности, жизненный цикл, ошибки и точки расширения в каждом capability.
+
+**Альтернативы:**
+- Единый монолитный spec.md: отклонено из-за ухудшения навигации и поддержки.
+- Использовать SHOULD/MAY: отклонено для уменьшения двусмысленности.
+
+## Risks / Trade-offs
+
+- [Risk] Спецификация может расходиться с фактическим поведением кода → Mitigation: привязка требований к публичным API и README, дальнейшая валидация при реализации.
+- [Risk] Перекрывающиеся требования между capability → Mitigation: строгие границы и минимальный повтор.
+
+## Migration Plan
+
+- Спецификация вводится как документ без влияния на runtime.
+- При необходимости последующих изменений — через отдельные change‑запросы OpenSpec.
+
+## Open Questions
+
+- Нужно ли фиксировать требования по производительности (O(1) lookup) как отдельный раздел?
+- Нужны ли отдельные сценарии для edge‑cases (например, singleton + params)?

openspec/changes/cherrypick-system-spec/proposal.md

@@ -0,0 +1,23 @@
+## Why
+
+CherryPick is a multi-package DI ecosystem. A system-level spec will make module boundaries, expected behaviors, and integration contracts explicit for contributors and downstream users.
+
+## What Changes
+
+- Define system specifications for the core DI runtime, annotations/codegen, Flutter integration, and Talker logging adapter.
+- Document expected behaviors, inputs, and outputs for each module and its public integration points.
+
+## Capabilities
+
+### New Capabilities
+- `di-runtime`: Core dependency injection runtime (scopes, modules, bindings, resolution, lifecycle).
+- `annotations-and-codegen`: Annotation vocabulary and code generation behavior for DI wiring.
+- `flutter-integration`: Flutter-specific provider and scope access integration.
+- `talker-logging-adapter`: Observer adapter that routes DI events to Talker.
+
+### Modified Capabilities
+
+## Impact
+
+- Documentation and contributor guidance for module behaviors.
+- Clarifies runtime and codegen expectations for users and maintainers.

openspec/changes/cherrypick-system-spec/specs/annotations-and-codegen/spec.md

@@ -0,0 +1,88 @@
+## ADDED Requirements
+
+### Requirement: Сущности аннотаций
+Пакет аннотаций MUST предоставлять аннотации `@module`, `@provide`, `@instance`, `@singleton`, `@named`, `@params`, `@inject`, `@injectable`, `@scope`.
+
+#### Scenario: Наличие аннотаций
+- **WHEN** разработчик импортирует пакет аннотаций
+- **THEN** все перечисленные аннотации доступны для использования
+
+### Requirement: Семантика module/provide/instance/singleton
+Генератор MUST трактовать аннотации `@module`, `@provide`, `@instance`, `@singleton` как источники bindings и жизненного цикла.
+
+#### Scenario: Генерация bindings для @module
+- **WHEN** класс помечен `@module` и содержит методы с `@provide`
+- **THEN** сгенерированный модуль регистрирует эти методы как DI‑bindings
+
+#### Scenario: Singleton vs Instance
+- **WHEN** метод помечен `@singleton`
+- **THEN** binding создается как singleton
+- **WHEN** метод помечен `@instance` или не имеет lifecycle‑аннотации
+- **THEN** binding создается как factory/instance
+
+#### Scenario: Обязательность provide/instance
+- **WHEN** публичный метод в `@module` не помечен `@instance` или `@provide`
+- **THEN** генератор завершает сборку с ошибкой валидации
+
+### Requirement: Инъекция полей
+Генератор MUST создавать миксин для класса с `@injectable` и инъектировать все поля, помеченные `@inject`.
+
+#### Scenario: Инъекция полей без квалификаторов
+- **WHEN** поле помечено `@inject`
+- **THEN** миксин вызывает resolve для типа поля
+
+#### Scenario: Инъекция с @named и @scope
+- **WHEN** поле помечено `@inject` и `@named` или `@scope`
+- **THEN** миксин использует соответствующий named/scope при резолве
+
+### Requirement: Параметры выполнения
+`@params` MUST обозначать runtime‑параметры, которые передаются при резолве.
+
+#### Scenario: Параметризованный provider
+- **WHEN** provider‑метод имеет параметр с `@params`
+- **THEN** генерируется binding с параметрами и соответствующий API резолва
+
+#### Scenario: Запрет @params с @instance
+- **WHEN** `@params` используется вместе с `@instance`
+- **THEN** генератор завершает сборку с ошибкой валидации
+
+### Requirement: Поддержка async
+Генератор MUST корректно обрабатывать `Future<T>` и асинхронные зависимости.
+
+#### Scenario: Async provider
+- **WHEN** provider возвращает `Future<T>`
+- **THEN** генерируется async‑binding и используется `resolveAsync`
+
+### Requirement: Обработка ошибок и валидация
+Генератор MUST валидировать корректность применения аннотаций и сообщать об ошибках на стадии build.
+
+#### Scenario: Некорректная цель аннотации
+- **WHEN** аннотация применена к неподдерживаемому элементу
+- **THEN** генератор завершает сборку с понятной ошибкой
+
+#### Scenario: Взаимоисключающие аннотации
+- **WHEN** метод помечен одновременно `@instance` и `@provide`
+- **THEN** генератор завершает сборку с ошибкой валидации
+
+#### Scenario: Требования к @named на provider-методе
+- **WHEN** `@named` на provider-методе использует пустую строку или некорректный идентификатор
+- **THEN** генератор завершает сборку с ошибкой валидации
+
+#### Scenario: Пустой @named на inject-поле
+- **WHEN** `@named('')` указан на поле с `@inject`
+- **THEN** генератор трактует поле как безымянный резолв (без параметра `named`)
+
+#### Scenario: Валидность @module
+- **WHEN** класс с `@module` не имеет публичных методов
+- **THEN** генератор завершает сборку с ошибкой валидации
+
+#### Scenario: Валидность @injectable полей
+- **WHEN** поле с `@inject` не является `final`
+- **THEN** генератор завершает сборку с ошибкой валидации
+
+### Requirement: Точки расширения
+Система MUST позволять расширять DI‑контракт через новые модули/классы без изменения генератора, используя стандартные аннотации.
+
+#### Scenario: Новый модуль
+- **WHEN** разработчик добавляет новый класс `@module`
+- **THEN** генератор автоматически включает его в DI‑регистрации

openspec/changes/cherrypick-system-spec/specs/di-runtime/spec.md

@@ -0,0 +1,137 @@
+## ADDED Requirements
+
+### Requirement: Сущности ядра DI
+Ядро DI MUST определять сущности `Scope`, `Module`, `Binding`, `BindingResolver`, `Disposable`, `CherryPickObserver` и их роли.
+
+#### Scenario: Декларация базовых сущностей
+- **WHEN** разработчик использует публичный API ядра
+- **THEN** сущности `Scope`, `Module`, `Binding`, `Disposable`, `CherryPickObserver` доступны и описывают контракт DI
+
+### Requirement: Жизненный цикл Scope
+`Scope` MUST поддерживать жизненный цикл открытия, использования и корректного закрытия с освобождением ресурсов.
+
+#### Scenario: Открытие root scope
+- **WHEN** вызывается открытие root scope
+- **THEN** создается корневой контейнер для регистраций и резолва
+
+#### Scenario: Открытие named subscope
+- **WHEN** открывается именованный subscope
+- **THEN** subscope наследует bindings родителя и может переопределять зависимости
+
+#### Scenario: Закрытие subscope
+- **WHEN** вызывается закрытие subscope
+- **THEN** subscope удаляется из дерева, а связанные ресурсы освобождаются
+
+#### Scenario: Путь scope и разделитель
+- **WHEN** вызывается `CherryPick.openScope(scopeName: ..., separator: ...)` с иерархическим путем
+- **THEN** создается цепочка subscopes по каждому сегменту пути
+
+#### Scenario: Пустой scopeName
+- **WHEN** вызывается `CherryPick.openScope(scopeName: '')`
+- **THEN** возвращается root scope
+
+### Requirement: Установка и удаление модулей
+`Scope` MUST поддерживать установку и удаление `Module`, а их bindings MUST становиться доступными сразу после установки.
+
+#### Scenario: Установка модуля
+- **WHEN** модуль установлен в scope
+- **THEN** его bindings доступны для resolve/tryResolve
+
+#### Scenario: Сброс модулей
+- **WHEN** модули сброшены
+- **THEN** bindings модулей не доступны для резолва в этом scope
+
+### Requirement: Типы bindings
+`Binding` MUST поддерживать прямые инстансы, синхронные провайдеры, асинхронные провайдеры и провайдеры с параметрами, а также именованные bindings.
+
+#### Scenario: Именованные bindings
+- **WHEN** зарегистрированы два bindings одного типа с разными именами
+- **THEN** resolve с указанным именем возвращает соответствующую реализацию
+
+#### Scenario: Параметризованный provider
+- **WHEN** binding зарегистрирован с провайдером, принимающим параметры
+- **THEN** resolve с параметрами использует переданные аргументы для создания экземпляра
+
+### Requirement: Семантика резолва и fallback
+Резолв MUST искать зависимость в текущем scope и, при отсутствии, подниматься к родительским scope.
+
+#### Scenario: Fallback к родителю
+- **WHEN** зависимость отсутствует в текущем scope, но есть в родительском
+- **THEN** резолв выполняется через родительский binding
+
+### Requirement: Синхронный и асинхронный резолв
+`Scope` MUST предоставлять синхронный и асинхронный резолв и их nullable‑варианты.
+
+#### Scenario: Resolve (sync)
+- **WHEN** вызывается `resolve<T>()` для существующей зависимости
+- **THEN** возвращается экземпляр или выбрасывается ошибка при отсутствии
+
+#### Scenario: TryResolve (sync)
+- **WHEN** вызывается `tryResolve<T>()` для отсутствующей зависимости
+- **THEN** возвращается `null` без исключения
+
+#### Scenario: Resolve (async)
+- **WHEN** вызывается `resolveAsync<T>()` для зависимости с async‑провайдером
+- **THEN** возвращается `Future<T>` с экземпляром
+
+#### Scenario: TryResolve (async)
+- **WHEN** вызывается `tryResolveAsync<T>()` для отсутствующей зависимости
+- **THEN** возвращается `null` без исключения
+
+### Requirement: Ошибки несоответствия sync/async
+Резолв MUST выбрасывать ошибки при несоответствии sync/async режима.
+
+#### Scenario: Синхронный резолв для async‑binding
+- **WHEN** binding зарегистрирован как async‑инстанс или async‑provider, а вызывается `resolve<T>()` или `tryResolve<T>()`
+- **THEN** выбрасывается ошибка с указанием использовать async‑резолв
+
+### Requirement: Управление Disposable
+`Scope` MUST отслеживать экземпляры, реализующие `Disposable`, и вызывать `dispose()` при закрытии scope.
+
+#### Scenario: Автоматическое освобождение
+- **WHEN** scope закрывается
+- **THEN** все `Disposable` в scope и дочерних scope освобождаются
+
+### Requirement: Детекция циклов зависимостей
+Ядро DI MUST поддерживать локальную и глобальную детекцию циклов.
+
+#### Scenario: Локальный цикл
+- **WHEN** локальная детекция включена и резолв обнаруживает цикл
+- **THEN** резолв завершается ошибкой цикла
+
+#### Scenario: Глобальный цикл
+- **WHEN** глобальная детекция включена и цикл пересекает scope
+- **THEN** резолв завершается ошибкой цикла
+
+### Requirement: Наблюдатель событий (Observer)
+Ядро DI MUST предоставлять наблюдателя, получающего события регистрации, резолва, ошибок, lifecycle и диагностики.
+
+#### Scenario: События lifecycle
+- **WHEN** scope открывается, модули устанавливаются и зависимости резолвятся
+- **THEN** observer получает соответствующие уведомления
+
+### Requirement: Ошибки и сообщения об ошибках
+При критических сбоях резолва ядро MUST выбрасывать ошибку с понятным сообщением. Для отсутствующей зависимости `tryResolve`/`tryResolveAsync` MUST возвращать `null` без исключения; ошибки выполнения резолва (например, цикл, sync/async mismatch, отсутствие обязательных params) MAY быть проброшены.
+
+#### Scenario: Ошибка отсутствующей зависимости
+- **WHEN** вызывается `resolve<T>()` для незарегистрированной зависимости
+- **THEN** выбрасывается ошибка с сообщением о невозможности резолва
+
+#### Scenario: Ошибка цикла
+- **WHEN** обнаружен цикл зависимостей
+- **THEN** выбрасывается ошибка с указанием цепочки
+
+#### Scenario: Отсутствующие параметры для параметризованного binding
+- **WHEN** binding зарегистрирован с `toProvideWithParams`, но резолв вызывается без `params`
+- **THEN** выбрасывается ошибка о необходимости передать параметры
+
+### Requirement: Точки расширения
+Ядро DI MUST предоставлять точки расширения через пользовательский `Module` и `CherryPickObserver`.
+
+#### Scenario: Пользовательский Module
+- **WHEN** разработчик создает свой `Module`
+- **THEN** он может зарегистрировать bindings и контролировать регистрацию
+
+#### Scenario: Пользовательский Observer
+- **WHEN** разработчик передает кастомный observer
+- **THEN** он получает все DI‑события и может интегрировать внешние логеры/метрики

openspec/changes/cherrypick-system-spec/specs/flutter-integration/spec.md

@@ -0,0 +1,58 @@
+## ADDED Requirements
+
+### Requirement: Сущности Flutter‑интеграции
+Flutter‑интеграция MUST предоставлять `CherryPickProvider` как `InheritedWidget` для доступа к DI‑scope в дереве виджетов.
+
+#### Scenario: Публичная сущность провайдера
+- **WHEN** разработчик импортирует Flutter‑пакет
+- **THEN** `CherryPickProvider` доступен и может быть помещен в дерево виджетов
+
+### Requirement: Жизненный цикл провайдера
+`CherryPickProvider` MUST быть статическим проводником к scope и не владеть их жизненным циклом.
+
+#### Scenario: Stateless поведение
+- **WHEN** `CherryPickProvider` пересоздается с тем же child
+- **THEN** он не инициирует изменения DI‑состояния и не уведомляет зависимые виджеты
+
+### Requirement: Доступ к root scope
+Провайдер MUST предоставлять доступ к root scope через `openRootScope`.
+
+#### Scenario: Открытие root scope
+- **WHEN** вызывается `openRootScope`
+- **THEN** возвращается root scope DI‑контейнера
+
+### Requirement: Доступ к subscope
+Провайдер MUST предоставлять доступ к subscope через `openSubScope` с именем и разделителем.
+
+#### Scenario: Открытие named subscope
+- **WHEN** вызывается `openSubScope` с именем
+- **THEN** возвращается subscope с указанным именем
+
+#### Scenario: Пустое имя scope
+- **WHEN** вызывается `openSubScope` без имени
+- **THEN** возвращается root scope
+
+### Requirement: Доступ через BuildContext
+`CherryPickProvider.of(context)` MUST возвращать провайдер из ближайшего ancestor.
+
+#### Scenario: Успешный lookup
+- **WHEN** вызов происходит внутри поддерева провайдера
+- **THEN** возвращается экземпляр провайдера
+
+#### Scenario: Ошибка lookup
+- **WHEN** вызов происходит вне поддерева провайдера
+- **THEN** в debug‑режиме происходит assertion‑ошибка
+
+### Requirement: Ошибки и сообщения
+При отсутствии провайдера в дереве MUST быть диагностируемая ошибка.
+
+#### Scenario: Диагностика отсутствия провайдера
+- **WHEN** `CherryPickProvider.of(context)` не находит провайдер
+- **THEN** в debug‑режиме сообщение assertion указывает на отсутствие провайдера
+
+### Requirement: Точки расширения
+Flutter‑интеграция MUST позволять использовать собственные DI‑scope стратегии поверх `CherryPickProvider`.
+
+#### Scenario: Кастомная организация scope
+- **WHEN** приложение использует собственные правила создания subscope
+- **THEN** провайдер остается совместимым и не ограничивает стратегию

openspec/changes/cherrypick-system-spec/specs/talker-logging-adapter/spec.md

@@ -0,0 +1,47 @@
+## ADDED Requirements
+
+### Requirement: Сущность адаптера логирования
+Адаптер MUST предоставлять `TalkerCherryPickObserver`, реализующий `CherryPickObserver`.
+
+#### Scenario: Доступность адаптера
+- **WHEN** разработчик импортирует пакет адаптера
+- **THEN** `TalkerCherryPickObserver` доступен для использования
+
+### Requirement: Жизненный цикл наблюдателя
+Наблюдатель MUST подключаться при создании scope и работать в течение жизненного цикла этого scope.
+
+#### Scenario: Подключение наблюдателя
+- **WHEN** observer передан при открытии scope
+- **THEN** все DI‑события в scope направляются в Talker
+
+### Requirement: Маппинг уровней логирования
+Адаптер MUST маршрутизировать DI‑события в Talker с корректными уровнями (info/warning/verbose/handle).
+
+#### Scenario: Диагностика
+- **WHEN** DI‑ядро генерирует диагностическое событие
+- **THEN** адаптер логирует его как verbose
+
+#### Scenario: Ошибка резолва
+- **WHEN** DI‑ядро генерирует ошибку
+- **THEN** адаптер логирует ее через `handle` и включает stack trace при наличии
+
+### Requirement: Ненавязчивость поведения
+Адаптер MUST быть наблюдателем и не изменять DI‑поведение, жизненный цикл или кэширование.
+
+#### Scenario: Разрешение с адаптером
+- **WHEN** адаптер подключен
+- **THEN** резолв и поведение DI не изменяются, кроме появления логов
+
+### Requirement: Ошибки логирования
+Адаптер MUST передавать ошибки логирования как есть и не содержит собственной обработки исключений.
+
+#### Scenario: Исключение в Talker
+- **WHEN** Talker выбрасывает исключение при логировании
+- **THEN** исключение пробрасывается вызывающему коду
+
+### Requirement: Точки расширения
+Адаптер MUST позволять использовать пользовательские настройки Talker без изменения адаптера.
+
+#### Scenario: Кастомная конфигурация Talker
+- **WHEN** пользователь передает кастомный Talker
+- **THEN** адаптер использует переданную конфигурацию для всех DI‑событий

openspec/changes/cherrypick-system-spec/tasks.md

@@ -0,0 +1,28 @@
+## 1. Системная структура спецификации
+
+- [x] 1.1 Проверить корректность capability‑разделения и согласованность терминов
+- [x] 1.2 Уточнить cross‑cutting требования (терминология, общие lifecycle‑понятия)
+
+## 2. DI Runtime (ядро)
+
+- [x] 2.1 Сверить требования по сущностям и lifecycle со структурой кода `cherrypick`
+- [x] 2.2 Уточнить сценарии ошибок и сообщений об ошибках
+- [x] 2.3 Проверить сценарии расширения (Module/Observer) на полноту
+
+## 3. Аннотации и генератор
+
+- [x] 3.1 Проверить полноту словаря аннотаций и их назначений
+- [x] 3.2 Сверить требования по codegen (module/field injection/params/async)
+- [x] 3.3 Уточнить сценарии валидации и типовых ошибок генератора
+
+## 4. Flutter‑интеграция
+
+- [x] 4.1 Сверить требования `CherryPickProvider` с фактическим API
+- [x] 4.2 Уточнить сценарии lookup и диагностических ошибок
+- [x] 4.3 Проверить корректность заявленных точек расширения
+
+## 5. Talker‑адаптер
+
+- [x] 5.1 Сверить маппинг уровней логирования с фактическим поведением
+- [x] 5.2 Уточнить поведение при ошибках логирования
+- [x] 5.3 Проверить сценарии ненавязчивости и расширения

pubspec.lock

@@ -1,27 +1,6 @@
 # Generated by pub
 # See https://dart.dev/tools/pub/glossary#lockfile
 packages:
-  _fe_analyzer_shared:
-    dependency: transitive
-    description:
-      name: _fe_analyzer_shared
-      sha256: "16e298750b6d0af7ce8a3ba7c18c69c3785d11b15ec83f6dcd0ad2a0009b3cab"
-      url: "https://pub.dev"
-    source: hosted
-    version: "76.0.0"
-  _macros:
-    dependency: transitive
-    description: dart
-    source: sdk
-    version: "0.3.3"
-  analyzer:
-    dependency: transitive
-    description:
-      name: analyzer
-      sha256: "1f14db053a8c23e260789e9b0980fa27f2680dd640932cae5e1137cce0e46e1e"
-      url: "https://pub.dev"
-    source: hosted
-    version: "6.11.0"
   ansi_styles:
     dependency: transitive
     description:
@@ -46,38 +25,6 @@ packages:
       url: "https://pub.dev"
     source: hosted
     version: "2.13.0"
-  boolean_selector:
-    dependency: transitive
-    description:
-      name: boolean_selector
-      sha256: "8aab1771e1243a5063b8b0ff68042d67334e3feab9e95b9490f9a6ebf73b42ea"
-      url: "https://pub.dev"
-    source: hosted
-    version: "2.1.2"
-  build:
-    dependency: transitive
-    description:
-      name: build
-      sha256: "80184af8b6cb3e5c1c4ec6d8544d27711700bc3e6d2efad04238c7b5290889f0"
-      url: "https://pub.dev"
-    source: hosted
-    version: "2.4.1"
-  built_collection:
-    dependency: transitive
-    description:
-      name: built_collection
-      sha256: "376e3dd27b51ea877c28d525560790aee2e6fbb5f20e2f85d5081027d94e2100"
-      url: "https://pub.dev"
-    source: hosted
-    version: "5.1.1"
-  built_value:
-    dependency: transitive
-    description:
-      name: built_value
-      sha256: ea90e81dc4a25a043d9bee692d20ed6d1c4a1662a28c03a96417446c093ed6b4
-      url: "https://pub.dev"
-    source: hosted
-    version: "8.9.5"
   charcode:
     dependency: transitive
     description:
@@ -90,26 +37,18 @@ packages:
     dependency: transitive
     description:
       name: checked_yaml
-      sha256: feb6bed21949061731a7a75fc5d2aa727cf160b91af9a3e464c5e3a32e28b5ff
+      sha256: "959525d3162f249993882720d52b7e0c833978df229be20702b33d48d91de70f"
       url: "https://pub.dev"
     source: hosted
-    version: "2.0.3"
+    version: "2.0.4"
-  cli_config:
-    dependency: transitive
-    description:
-      name: cli_config
-      sha256: ac20a183a07002b700f0c25e61b7ee46b23c309d76ab7b7640a028f18e4d99ec
-      url: "https://pub.dev"
-    source: hosted
-    version: "0.2.0"
   cli_launcher:
     dependency: transitive
     description:
       name: cli_launcher
-      sha256: "5e7e0282b79e8642edd6510ee468ae2976d847a0a29b3916e85f5fa1bfe24005"
+      sha256: "17d2744fb9a254c49ec8eda582536abe714ea0131533e24389843a4256f82eac"
       url: "https://pub.dev"
     source: hosted
-    version: "0.3.1"
+    version: "0.3.2+1"
   cli_util:
     dependency: transitive
     description:
@@ -118,22 +57,6 @@ packages:
       url: "https://pub.dev"
     source: hosted
     version: "0.4.2"
-  clock:
-    dependency: transitive
-    description:
-      name: clock
-      sha256: fddb70d9b5277016c77a80201021d40a2247104d9f4aa7bab7157b7e3f05b84b
-      url: "https://pub.dev"
-    source: hosted
-    version: "1.1.2"
-  code_builder:
-    dependency: transitive
-    description:
-      name: code_builder
-      sha256: "0ec10bf4a89e4c613960bf1e8b42c64127021740fb21640c29c909826a5eea3e"
-      url: "https://pub.dev"
-    source: hosted
-    version: "4.10.1"
   collection:
     dependency: transitive
     description:
@@ -146,42 +69,10 @@ packages:
     dependency: transitive
     description:
       name: conventional_commit
-      sha256: dec15ad1118f029c618651a4359eb9135d8b88f761aa24e4016d061cd45948f2
+      sha256: c40b1b449ce2a63fa2ce852f35e3890b1e182f5951819934c0e4a66254bc0dc3
       url: "https://pub.dev"
     source: hosted
-    version: "0.6.0+1"
+    version: "0.6.1+1"
-  convert:
-    dependency: transitive
-    description:
-      name: convert
-      sha256: b30acd5944035672bc15c6b7a8b47d773e41e2f17de064350988c5d02adb1c68
-      url: "https://pub.dev"
-    source: hosted
-    version: "3.1.2"
-  coverage:
-    dependency: transitive
-    description:
-      name: coverage
-      sha256: "802bd084fb82e55df091ec8ad1553a7331b61c08251eef19a508b6f3f3a9858d"
-      url: "https://pub.dev"
-    source: hosted
-    version: "1.13.1"
-  crypto:
-    dependency: transitive
-    description:
-      name: crypto
-      sha256: "1e445881f28f22d6140f181e07737b22f1e099a5e1ff94b0af2f9e4a463f4855"
-      url: "https://pub.dev"
-    source: hosted
-    version: "3.0.6"
-  dart_style:
-    dependency: transitive
-    description:
-      name: dart_style
-      sha256: "7856d364b589d1f08986e140938578ed36ed948581fbc3bc9aef1805039ac5ab"
-      url: "https://pub.dev"
-    source: hosted
-    version: "2.3.7"
   file:
     dependency: transitive
     description:
@@ -190,22 +81,6 @@ packages:
       url: "https://pub.dev"
     source: hosted
     version: "7.0.1"
-  fixnum:
-    dependency: transitive
-    description:
-      name: fixnum
-      sha256: b6dc7065e46c974bc7c5f143080a6764ec7a4be6da1285ececdc37be96de53be
-      url: "https://pub.dev"
-    source: hosted
-    version: "1.1.1"
-  frontend_server_client:
-    dependency: transitive
-    description:
-      name: frontend_server_client
-      sha256: f64a0333a82f30b0cca061bc3d143813a486dc086b574bfb233b7c1372427694
-      url: "https://pub.dev"
-    source: hosted
-    version: "4.0.0"
   glob:
     dependency: transitive
     description:
@@ -226,18 +101,10 @@ packages:
     dependency: transitive
     description:
       name: http
-      sha256: fe7ab022b76f3034adc518fb6ea04a82387620e19977665ea18d30a1cf43442f
+      sha256: "87721a4a50b19c7f1d49001e51409bddc46303966ce89a65af4f4e6004896412"
       url: "https://pub.dev"
     source: hosted
-    version: "1.3.0"
+    version: "1.6.0"
-  http_multi_server:
-    dependency: transitive
-    description:
-      name: http_multi_server
-      sha256: aa6199f908078bb1c5efb8d8638d4ae191aac11b311132c3ef48ce352fb52ef8
-      url: "https://pub.dev"
-    source: hosted
-    version: "3.2.2"
   http_parser:
     dependency: transitive
     description:
@@ -246,14 +113,6 @@ packages:
       url: "https://pub.dev"
     source: hosted
     version: "4.1.2"
-  intl:
-    dependency: transitive
-    description:
-      name: intl
-      sha256: d6f56758b7d3014a48af9701c085700aac781a92a87a62b1333b46d8879661cf
-      url: "https://pub.dev"
-    source: hosted
-    version: "0.19.0"
   io:
     dependency: transitive
     description:
@@ -262,110 +121,46 @@ packages:
       url: "https://pub.dev"
     source: hosted
     version: "1.0.5"
-  js:
-    dependency: transitive
-    description:
-      name: js
-      sha256: c1b2e9b5ea78c45e1a0788d29606ba27dc5f71f019f32ca5140f61ef071838cf
-      url: "https://pub.dev"
-    source: hosted
-    version: "0.7.1"
   json_annotation:
     dependency: transitive
     description:
       name: json_annotation
-      sha256: "1ce844379ca14835a50d2f019a3099f419082cfdd231cd86a142af94dd5c6bb1"
+      sha256: "805fa86df56383000f640384b282ce0cb8431f1a7a2396de92fb66186d8c57df"
       url: "https://pub.dev"
     source: hosted
-    version: "4.9.0"
+    version: "4.10.0"
   lints:
     dependency: "direct dev"
     description:
       name: lints
-      sha256: "0a217c6c989d21039f1498c3ed9f3ed71b354e69873f13a8dfc3c9fe76f1b452"
+      sha256: c35bb79562d980e9a453fc715854e1ed39e24e7d0297a880ef54e17f9874a9d7
       url: "https://pub.dev"
     source: hosted
-    version: "2.1.1"
+    version: "5.1.1"
-  logging:
-    dependency: transitive
-    description:
-      name: logging
-      sha256: c8245ada5f1717ed44271ed1c26b8ce85ca3228fd2ffdb75468ab01979309d61
-      url: "https://pub.dev"
-    source: hosted
-    version: "1.3.0"
-  macros:
-    dependency: transitive
-    description:
-      name: macros
-      sha256: "1d9e801cd66f7ea3663c45fc708450db1fa57f988142c64289142c9b7ee80656"
-      url: "https://pub.dev"
-    source: hosted
-    version: "0.1.3-main.0"
-  matcher:
-    dependency: transitive
-    description:
-      name: matcher
-      sha256: dc58c723c3c24bf8d3e2d3ad3f2f9d7bd9cf43ec6feaa64181775e60190153f2
-      url: "https://pub.dev"
-    source: hosted
-    version: "0.12.17"
   melos:
     dependency: "direct dev"
     description:
       name: melos
-      sha256: "3f3ab3f902843d1e5a1b1a4dd39a4aca8ba1056f2d32fd8995210fa2843f646f"
+      sha256: "4280dc46bd5b741887cce1e67e5c1a6aaf3c22310035cf5bd33dceeeda62ed22"
       url: "https://pub.dev"
     source: hosted
-    version: "6.3.2"
+    version: "6.3.3"
   meta:
     dependency: "direct main"
     description:
       name: meta
-      sha256: e3641ec5d63ebf0d9b41bd43201a66e3fc79a65db5f61fc181f04cd27aab950c
+      sha256: "9f29b9bcc8ee287b1a31e0d01be0eae99a930dbffdaecf04b3f3d82a969f296f"
       url: "https://pub.dev"
     source: hosted
-    version: "1.16.0"
+    version: "1.18.1"
-  mime:
-    dependency: transitive
-    description:
-      name: mime
-      sha256: "41a20518f0cb1256669420fdba0cd90d21561e560ac240f26ef8322e45bb7ed6"
-      url: "https://pub.dev"
-    source: hosted
-    version: "2.0.0"
-  mockito:
-    dependency: "direct dev"
-    description:
-      name: mockito
-      sha256: "6841eed20a7befac0ce07df8116c8b8233ed1f4486a7647c7fc5a02ae6163917"
-      url: "https://pub.dev"
-    source: hosted
-    version: "5.4.4"
   mustache_template:
     dependency: transitive
     description:
       name: mustache_template
-      sha256: a46e26f91445bfb0b60519be280555b06792460b27b19e2b19ad5b9740df5d1c
+      sha256: "4326d0002ff58c74b9486990ccbdab08157fca3c996fe9e197aff9d61badf307"
       url: "https://pub.dev"
     source: hosted
-    version: "2.0.0"
+    version: "2.0.3"
-  node_preamble:
-    dependency: transitive
-    description:
-      name: node_preamble
-      sha256: "6e7eac89047ab8a8d26cf16127b5ed26de65209847630400f9aefd7cd5c730db"
-      url: "https://pub.dev"
-    source: hosted
-    version: "2.0.2"
-  package_config:
-    dependency: transitive
-    description:
-      name: package_config
-      sha256: f096c55ebb7deb7e384101542bfba8c52696c1b56fca2eb62827989ef2353bbc
-      url: "https://pub.dev"
-    source: hosted
-    version: "2.2.0"
   path:
     dependency: transitive
     description:
@@ -386,18 +181,18 @@ packages:
     dependency: transitive
     description:
       name: pool
-      sha256: "20fe868b6314b322ea036ba325e6fc0711a22948856475e2c2b6306e8ab39c2a"
+      sha256: "978783255c543aa3586a1b3c21f6e9d720eb315376a915872c61ef8b5c20177d"
       url: "https://pub.dev"
     source: hosted
-    version: "1.5.1"
+    version: "1.5.2"
   process:
     dependency: transitive
     description:
       name: process
-      sha256: "107d8be718f120bbba9dcd1e95e3bd325b1b4a4f07db64154635ba03f2567a0d"
+      sha256: c6248e4526673988586e8c00bb22a49210c258dc91df5227d5da9748ecf79744
       url: "https://pub.dev"
     source: hosted
-    version: "5.0.3"
+    version: "5.0.5"
   prompts:
     dependency: transitive
     description:
@@ -418,74 +213,18 @@ packages:
     dependency: transitive
     description:
       name: pub_updater
-      sha256: "54e8dc865349059ebe7f163d6acce7c89eb958b8047e6d6e80ce93b13d7c9e60"
+      sha256: "739a0161d73a6974c0675b864fb0cf5147305f7b077b7f03a58fa7a9ab3e7e7d"
       url: "https://pub.dev"
     source: hosted
-    version: "0.4.0"
+    version: "0.5.0"
   pubspec_parse:
     dependency: transitive
     description:
       name: pubspec_parse
-      sha256: "81876843eb50dc2e1e5b151792c9a985c5ed2536914115ed04e9c8528f6647b0"
+      sha256: "0560ba233314abbed0a48a2956f7f022cce7c3e1e73df540277da7544cad4082"
-      url: "https://pub.dev"
-    source: hosted
-    version: "1.4.0"
-  shelf:
-    dependency: transitive
-    description:
-      name: shelf
-      sha256: e7dd780a7ffb623c57850b33f43309312fc863fb6aa3d276a754bb299839ef12
-      url: "https://pub.dev"
-    source: hosted
-    version: "1.4.2"
-  shelf_packages_handler:
-    dependency: transitive
-    description:
-      name: shelf_packages_handler
-      sha256: "89f967eca29607c933ba9571d838be31d67f53f6e4ee15147d5dc2934fee1b1e"
-      url: "https://pub.dev"
-    source: hosted
-    version: "3.0.2"
-  shelf_static:
-    dependency: transitive
-    description:
-      name: shelf_static
-      sha256: c87c3875f91262785dade62d135760c2c69cb217ac759485334c5857ad89f6e3
-      url: "https://pub.dev"
-    source: hosted
-    version: "1.1.3"
-  shelf_web_socket:
-    dependency: transitive
-    description:
-      name: shelf_web_socket
-      sha256: "3632775c8e90d6c9712f883e633716432a27758216dfb61bd86a8321c0580925"
-      url: "https://pub.dev"
-    source: hosted
-    version: "3.0.0"
-  source_gen:
-    dependency: transitive
-    description:
-      name: source_gen
-      sha256: "14658ba5f669685cd3d63701d01b31ea748310f7ab854e471962670abcf57832"
       url: "https://pub.dev"
     source: hosted
     version: "1.5.0"
-  source_map_stack_trace:
-    dependency: transitive
-    description:
-      name: source_map_stack_trace
-      sha256: c0713a43e323c3302c2abe2a1cc89aa057a387101ebd280371d6a6c9fa68516b
-      url: "https://pub.dev"
-    source: hosted
-    version: "2.1.2"
-  source_maps:
-    dependency: transitive
-    description:
-      name: source_maps
-      sha256: "190222579a448b03896e0ca6eca5998fa810fda630c1d65e2f78b3f638f54812"
-      url: "https://pub.dev"
-    source: hosted
-    version: "0.10.13"
   source_span:
     dependency: transitive
     description:
@@ -502,14 +241,6 @@ packages:
       url: "https://pub.dev"
     source: hosted
     version: "1.12.1"
-  stream_channel:
-    dependency: transitive
-    description:
-      name: stream_channel
-      sha256: "969e04c80b8bcdf826f8f16579c7b14d780458bd97f56d107d3950fdbeef059d"
-      url: "https://pub.dev"
-    source: hosted
-    version: "2.1.4"
   string_scanner:
     dependency: transitive
     description:
@@ -526,30 +257,6 @@ packages:
       url: "https://pub.dev"
     source: hosted
     version: "1.2.2"
-  test:
-    dependency: "direct dev"
-    description:
-      name: test
-      sha256: "301b213cd241ca982e9ba50266bd3f5bd1ea33f1455554c5abb85d1be0e2d87e"
-      url: "https://pub.dev"
-    source: hosted
-    version: "1.25.15"
-  test_api:
-    dependency: transitive
-    description:
-      name: test_api
-      sha256: fb31f383e2ee25fbbfe06b40fe21e1e458d14080e3c67e7ba0acfde4df4e0bbd
-      url: "https://pub.dev"
-    source: hosted
-    version: "0.7.4"
-  test_core:
-    dependency: transitive
-    description:
-      name: test_core
-      sha256: "84d17c3486c8dfdbe5e12a50c8ae176d15e2a771b96909a9442b40173649ccaa"
-      url: "https://pub.dev"
-    source: hosted
-    version: "0.6.8"
   typed_data:
     dependency: transitive
     description:
@@ -558,22 +265,6 @@ packages:
       url: "https://pub.dev"
     source: hosted
     version: "1.4.0"
-  vm_service:
-    dependency: transitive
-    description:
-      name: vm_service
-      sha256: ddfa8d30d89985b96407efce8acbdd124701f96741f2d981ca860662f1c0dc02
-      url: "https://pub.dev"
-    source: hosted
-    version: "15.0.0"
-  watcher:
-    dependency: transitive
-    description:
-      name: watcher
-      sha256: "69da27e49efa56a15f8afe8f4438c4ec02eff0a117df1b22ea4aad194fe1c104"
-      url: "https://pub.dev"
-    source: hosted
-    version: "1.1.1"
   web:
     dependency: transitive
     description:
@@ -582,30 +273,6 @@ packages:
       url: "https://pub.dev"
     source: hosted
     version: "1.1.1"
-  web_socket:
-    dependency: transitive
-    description:
-      name: web_socket
-      sha256: bfe6f435f6ec49cb6c01da1e275ae4228719e59a6b067048c51e72d9d63bcc4b
-      url: "https://pub.dev"
-    source: hosted
-    version: "1.0.0"
-  web_socket_channel:
-    dependency: transitive
-    description:
-      name: web_socket_channel
-      sha256: d645757fb0f4773d602444000a8131ff5d48c9e47adfe9772652dd1a4f2d45c8
-      url: "https://pub.dev"
-    source: hosted
-    version: "3.0.3"
-  webkit_inspection_protocol:
-    dependency: transitive
-    description:
-      name: webkit_inspection_protocol
-      sha256: "87d3f2333bb240704cd3f1c6b5b7acd8a10e7f0bc28c28dcf14e782014f4a572"
-      url: "https://pub.dev"
-    source: hosted
-    version: "1.2.1"
   yaml:
     dependency: transitive
     description:
@@ -618,9 +285,9 @@ packages:
     dependency: transitive
     description:
       name: yaml_edit
-      sha256: fb38626579fb345ad00e674e2af3a5c9b0cc4b9bfb8fd7f7ff322c7c9e62aef5
+      sha256: ec709065bb2c911b336853b67f3732dd13e0336bd065cc2f1061d7610ddf45e3
       url: "https://pub.dev"
     source: hosted
-    version: "2.2.2"
+    version: "2.2.3"
 sdks:
-  dart: ">=3.5.2 <4.0.0"
+  dart: ">=3.9.0 <4.0.0"

pubspec.yaml

@@ -7,16 +7,11 @@ repository: https://github.com/pese-git/cherrypick
 issue_tracker: https://github.com/pese-git/cherrypick/issues
 
 environment:
-  sdk: ">=3.5.2 <4.0.0"
+  sdk: ">=3.8.0 <4.0.0"
 
 dependencies:
   meta: ^1.3.0
 
 dev_dependencies:
-  #pedantic: ^1.11.0
+  lints: ^5.1.1
-
-  test: ^1.17.2
-
-  mockito: ^5.0.6
-  lints: ^2.1.0
   melos: ^6.3.2

talker_cherrypick_logger/CHANGELOG.md

@@ -1,3 +1,15 @@
+## 3.0.2
+
+ - Update a dependency to the latest release.
+
+## 3.0.1
+
+ - **DOCS**: add Netlify deployment status badge to README files.
+
+## 3.0.0
+
+ - Graduate package to a stable release. See pre-releases prior to this version for changelog entries.
+
 ## 3.0.0-dev.1
 
  - Update a dependency to the latest release.

talker_cherrypick_logger/README.md

@@ -1,3 +1,8 @@
+[![Melos + FVM CI](https://github.com/pese-git/cherrypick/actions/workflows/pipeline.yml/badge.svg)](https://github.com/pese-git/cherrypick/actions/workflows/pipeline.yml)
+[![Netlify Status](https://api.netlify.com/api/v1/badges/3c3e0f98-27a9-4dd4-9eab-4be0b96798b8/deploy-status)](https://app.netlify.com/projects/cherrypick-di/deploys)
+
+---
+
 # talker_cherrypick_logger
 
 An integration package that allows you to log [CherryPick](https://github.com/pese-dot-work/cherrypick) Dependency Injection (DI) container events using the [Talker](https://pub.dev/packages/talker) logging system.  

talker_cherrypick_logger/pubspec.yaml

@@ -1,8 +1,8 @@
 name: talker_cherrypick_logger
 description: A Talker logger integration for CherryPick DI to observe and log DI events and errors.
-version: 3.0.0-dev.1
+version: 3.0.2
-homepage: https://cherrypick-di.dev/
+homepage: https://cherrypick-di.netlify.app
-documentation: https://cherrypick-di.dev/docs/intro
+documentation: https://cherrypick-di.netlify.app/docs/intro
 repository: https://github.com/pese-git/cherrypick
 issue_tracker: https://github.com/pese-git/cherrypick/issues
 
@@ -13,14 +13,14 @@ topics:
   - log
   
 environment:
-  sdk: ">=3.5.2 <4.0.0"
+  sdk: '>=3.2.0 <4.0.0'
 
 # Add regular dependencies here.
 dependencies:
-  talker: ^4.9.3
+  talker: ^5.0.0
-  cherrypick: ^3.0.0-dev.13
+  cherrypick: ^3.0.2
 
 
 dev_dependencies:
-  lints: ^5.0.0
+  lints: ^4.0.0
-  test: ^1.24.0
+  test: ^1.25.6